The impact of the distribution in the soil volume of two farm manures on the net mineralization and immobilization processes of nitrogen were studied in an incubation experiment. Cattle slurry and broiler litter were placed in the soil with three procedures for incorporation including placement on top of the soil (TOP), in the middle of the soil (MID) and mixed homogenously with the soil (MIX). During the two weeks of incubation, few significant differences in net mineralization were seen between TOP, MID and MIX. However, there was a tendency that MIX led to a larger net immobilization of N than placement at one point (TOP and MID). This is also the result in the literature.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

The structure of the thesis is based on opportunities to attract businesses to the region, the need of establishments in the region and benchmarking with establishment strategies of other cluster initiatives. The identified opportunities are the local business relationship with ABB, the prerequisites of life quality in the region and the availability of financial support. Further on has a number of opportunities to be developed been identified; diversification of the existing businesses, an expansion of the cooperation with universities and to simplify the contact with local authorities. Challenges that HVV is facing is: creating a more dynamic labor market, secure long-term labor supply, spread the image of the brand HVV and finally putting HVVs geographic scope. Two of the identified needs of establishments are strategically important: to establish a third-party logistician and commercializing systems for distributed generation and energy storage.

Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

Mek Stans 07 is a machine developed for Tetra Pak in Lund as a 10p candidate theses project at Halmstad University. The commission behind the project involved development of a machine that punches holes in packages for the inspection division at Tetra Pak. The task for the machine was to facilitate the process of making openings for testing in the company?s other equipment. Researches on different methods of cutting, types of automatization and possible designs were made. To implement the project a design and construction from the base where chosen.

A computer model based on minimization of the free energy, capable to predict contact angles and spreading transitions between Wenzel and Cassie mode for drops placed on surfaces with different topography were implemented in matlab. Simulations were compared with experiments documented in the literature. These showed that reported transitions between Cassie and Wenzel mode can be explained by minimization of the free energy. In this report, a study on the possibility of constructing water repellent paper surfaces with a combination of treatment with octadecyltrichlorosilane and topography changes, is included..

The work has been carried out in cooperation with the company Zenit Design in Malmö. The project's goal was to restore, improve and produce an ozone generator. During the project, the authors sought relevant literature in databases, been in contact with US suppliers of fuel cell membranes, Asian suppliers for the processing of Teflon and Titanium parts in mechanical engineering and Swedish suppliers of various standard components. The authors had access to a temporary lab at Zenit and electron microscope at Halmstad University where material tests were performed. The authors have also had access to measurement equipment to measure amounts of ozone.During the work, the authors have mapped how an existing ozone generator works and then have their own development.

Radio Frequency Identification, RFID, is a convenient way to enable contactless identification which does not require any physical nor optical contact. As with any radio-based communication the signal can be intercepted, thus making the technology vulnerable to several kinds of attacks. Interception of communication is not the only threat. Since RFID tags might contain personal information or information that will grant the owner access to secure areas, skimming and spoofing attacks are also major threats against this technology. In this thesis report,  the perspective of an adversary is portrayed in an RFID-enabled environment by presenting where RFID is used and how it could be abused.

In school today pupils come in contact with all kinds of reading books. Education of Swedish reading development sometimes contain reading books organized at different levels of difficulty, with different amount of text. The purpose of the different difficulty levels is to give the less skilled readers an easier book and stronger readers a more difficult book. The purpose with this study is to find out if the book which is classified as more difficult, in reality is the most difficult and if the book which is considered to be easier really is. To find answers to these questions I will examine previous researcher?s theories on difficulty levels in reading books.

This literature review summarizes available data on infection with the parasitic roundworm, Ascaridia galli, as a cause of disease in poultry, including the consequences of a conversion to alternative production systems. Ascaridia galli has a direct life cycle with resistant eggs that survive and are easily spread in the environment, especially in systems with bedding materials where the faecal contact is high. The infection is usually subclinical but depending on the infection dose, the symptoms range from weight loss and diarrhea to mortality. Factors such as the feed composition and genetic variation among different hybrids clearly affect the establishment rate of the infection. Ascaridia galli will probably become an increasing problem, with a shift from the traditional battery cages to alternative systems where the risk of re-infection is high.

Strong relationships are something that is really important for companies to succeed with, in purpose to increase and protect their market shares. After major research on the subject, it has been found that variables like exchange of relationship, trust, control mutability, satisfaction and commitment are important in the establishment of measuring a relationship. The purpose with this thesis was to: increase the knowledge on how companies measure, and then consequently evaluate, their relationships. To answer the purpose of the study we chose to do a case study at Stadium AB, which is a retailing concern with a high level of customer contact on a daily basis. The conclusion is that trust most likely is the key variable in measuring relationships.

The aim of this work is to examine methodologies at remedial lessons for children with weak mobility, in a common Swedish municipal school in an attempt to determine if a connection to theoretical learning exists.Kadesjö describes how difficulties in concentration can arise as a result of problems with mobility and perception, and according to Piaget very young children develop cogitation through physical movements. These connections are not news but always current.At the meeting with Lasse the question was born whether learning problems in school that are a result of concentration difficulties, could be countered with mobility training.By the selection of Life history as method, it?s possible to follow a physical educator's experiences through his 30 years of work, and to some extent even his private life. Experiences and results are notified from a historical perspective from 1976 until 2006.He is bringing us on a journey that shows the changes in methodology and results after his contact with Sensomotoriskt Centrum..

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

To get the maximal output of your exercise in gym machines, there are different factorsto be considered. For example the strength of the muscle varies dependent on the positionof the muscles. To get the best results of the exercise the load has to reduce and increaseat specific positions.This study was made in cooperation with Caretaker Scandinavia AB, a company forsales, marketing and development in health care. They are general agent for Nordic Gymwho works with manufacturing of equipment and machines for gym and fitness.The aim of this study was to generate a method of measurement to evaluate and controlthe biomechanics of Nordic Gym´s workout equipment. A protocol for an ergonomicanalysis on the equipment has also been elaborated.One of the methods to measure the biomechanics was to measure the torque through thewhole movement.

The aim of this essay was to look into and compare the experiences and opinions about the practice of 13 § LVM among persons that, through their profession, use the law.The questions we have been asking were; what experiences and opinions the individuals have about the paragraph in general, what they think about the cases when no application for LVM is made after a client has been taken in charge as directed by 13 § LVM, and of the fact that the majority of cases of LVM are initiated by the same paragraph. Another question was how the individuals think about the legal security in connection to 13 § LVM.The methods used are qualitative and we have interviewed individuals from different fields of social work that comes in contact with drug abusers.The findings from these studies include that care made out of the clients' free will is the main reason why an application is not made. It is also the reason to why many LVM initiates as directed by 13 § LVM for the reason that the districts above all try to help the clients without force. The economical aspects are repeatedly mentioned as another reason to the problems appeared in connection with 13 § LVM..