This report is a part of the process of enhanced cooperation between fire rescue services in the region of North West Scania. The aim of the report is to study and analyze how the fire rescue service should be structured, in terms of rescue units and personnel, if no account is to be taking to the current organization. Two types of accident are considered in the report, traffic accidents and building fires. These are more affected by decreased response time than other accidents. Several suggested organizations are presented and they are evaluated with the computer program REP.

The purpose of this report is to collect, compile and complement the scientific and experience based knowledge concerning high pressure fire fighting today. The goal is to produce a decision data for the Rescue Service concerning the use of high pressure systems for fire fighting. Focus is on hose reel high pressure systems but other systems are discussed too. The report begins by describing the technical properties of the different systems. Then the fire fighting properties are evaluated, including manoeuvrability and safety for users.

Webbaserat Tidrapporteringsystem.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

The task to this thesis has been to create an application, Katana-databas 1.0, for analysing c-code. The generated output gets stored in a data structure which content in the end of the program run gets written in a textfile which gets used by Katana. It's a tool for reverse engineering, developed by Johan Kraft at Mälardalens institute.Katana-databas has got the following limitations. (1) It can only handle preprocessed files, meaning it doesn't contain any rows beginning with "#". (2) Only complete files can be handled.

Denna rapport beskriver examensarbetet vi gjort för LBS Science Park AB. Anledningen till att vi gjort just denna applikation var att LBS Science Park såg ett problem i den Internetbaserade hästannonsmarknaden. Det fanns ingen ledande annonssida, utan användare som skulle sälja eller köpa hästar fick använda sig av flera mindre sidor. Vår uppgift blev att undersöka marknaden och att skapa en applikation som samlar annonser från flera hemsidor på vår applikation. Rapporten är indelad i tre huvuddelar, som belyser de juridiska, de tekniska och de innehållsmässiga frågorna.

To achieve the requirements to decrease emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

AbstractThis degree thesis was made in cooperation with Chematur Engineering in Karlskoga.Many of the environmental issues of today are a result of the motor traffic. Consumption of fossil fuels harms our environmental through formation of carbon dioxide and other greenhouse gases. To get under control with our environmental issues it?s important to find substitutes for oil that are both cheap and environmentally friendly. Ethanol has a long history as a motor fuel and is both enviromentally friendly has a high efficiency.According to the EU commissions directives for motor fuels, 5, 75 % of all the fuels in Sweden should be renewable in 2010.

In order to reduce the number of casualties and injured from accidents the rescue service must become more efficient and flexible. It is noted that far more people is injured and killed in traffic accidents than from fires. During the daytime the number of accidents in about three times higher than during the night, even so today the number of fire fighters on duty is the same day and night.Two computer models for simulation of different locations of the rescue services are used to determine the best options for placement of the rescue services. A cost-benefit analysis is also used to determine if today's fire stations are efficient for the society from an economical point of view.The results of the different models are that the fire station in Lund is misplaced. The number of ladders in Malmö can be reduced.

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

As requested by the company Husqvarna AB, we have developed a prototype of an electrical start device to a chainsaw. This was done through the development of new details in Catia, which has been integrated with existing details. Electrical components have been purchased by HAB electronics. In parallel with the modeling calculations was done, which was the basis for determine dimensions and the choice of an electric motor and gears. Prototype 1 improved gradually and led to prototype number 2, which became the final result.

I programmeringsvärlden har en ren, enkel och testbar kod en stor betydelse. Detta examensarbete avslöjar ett nytt koncept vilket kanske är den viktigaste upptäckten inom metodområdet på senare tid, så kallade Testdriven utveckling (TDD). Testdriven utveckling är ett sätt att utveckla mjukvara och det som utmärker den är att man först skriver ett test som inte ska fungera (röd fas), sedan skriver man en kod, så enkelt som möjligt, som gör att testet ska fungera (grön fas) och till slut ska man våga göra förändringar även om koden fungerar, om man är inte riktigt nöjd eller om man helt enkelt vill optimera sin kod (omstrukturera fas). Syftet med studien var att utvärdera vilka fördelarna och eventuella nackdelarna är med den här typen av mjukvaruutveckling, att motivera varför det är lämpligt att välja den och att visa hur man gör med hjälp av Java, JUnit och Eclipse. Material som användes i studien insamlades genom litteratursökningen och intervjuer.

This report is the final step in the Bachelor of Science program in Building Construction Engineering, Department of Engineering Sciences, Uppsala University.The purpose of this study is to highlight the difficulties and possibilities that could involve the introduction of new energy efficient technologies and changing work around this technology. This study focuses on energy use at a construction site or other temporary workplace where so-called portacabins are in place to address the need for temporary facilities.The method for obtaining knowledge on the subject was mainly interviews with site managers working in Svevia AB's various activities. In conjunction with the interviews I visited construction sites and portacabins if it was possible.My most important suggestion to Svevia AB concerns a better organization in order to make poratacabins more efficient on energy and costs. The company should also evaluate and monitor the energy efficient portacabins that are in operation.Expected energy savings of new technology may not materialize if there are gaps in information, education, technical services and technical maintenance. It is very important to utilize the experiences of new technology.

The aim of this dissertation is to examine and compare William Easterly?s and PGU?s (Shared Responsibility: Sweden's Policy for Global Development) different views on development and international development cooperation. The methodological approach chosen in this study is an analysis of ideas based on the following questions:1. Which principles should be applied to development and international development cooperation?2.

AbstractThe purpose of this study was to identify problems that may occur in the execution of a civil engineering project and suggest measures to reduce the risk of errors. The study was conducted in cooperation with a civil engineering company in the Gothenburg area. During two weeks in February 2012, a field study took place on two construction sites where disruption and problems that took more than 15 minutes to correct were noted. During the field study we identified 39 such occurrences in the projects and then these were classified into different categories according to their cause.The two largest categories were "Design" and "Planning", which accounted for half of the errors that were discovered.In the study results were evaluated to decide whether it was possible to detect discrepancies at an earlier stage. The cost to fix an error in the design stage may be significantly less than to correct the problem in production.According to the evaluation, 55% of the errors could have been detected earlier if there was a greater degree of observation for such issues by everyone involved in the project.