AbstractSAAB has for a long time used user controlled pilot models in ARES. ARES is a simulation tool used in the desktop environment for simulations and calculations of the JAS 39 Gripen fighter and other aircraft. ARES stands for ?Aircraft Rigid body Engineering Simulation?. To work with these pilot models has been both time-consuming and inefficient.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

A new type of device for measuring thev m& ?rate of fuel sprays from a diesel fuel injector has been developed and the various steps in the development are described. The device works by deflecting all of the sprays from the injector at the same time by using a bell shaped deflector. A load cell consisting of a machined steel part with strain gauges mounted on it measures the resulting force. The shape of the curvature in the deflector bell shape has been evaluated by photographing the flow in a 2D?version of the curve shape.

The purpose of the study was to investigate the use and losses of energy in an existing older building. Another purpose was also to look through various options for heating systems with renewable energy in the building. The aim was to reduce the use and losses of energy. The first step was to study the related electricity bills of the building and also perform measurements and calculations of the building envelope and ventilation. The next step was to find out the possible actions for energy saving by performing measurements and calculations.

AbstractThe Northern Wheatear (Oenanthe oenanthe) is a small insectivorous passerine bird living in open landscapes. Both parents feed the brood of approximately five chicks, but little is known about how each sex allocates their feeding effort. In this study I investigate feeding nest visit differences between male and female Northern Wheatears relative to the age of the chicks, the number of chicks and the quality of the territory for 17 pairs from 2008-2010. Data were collected using automated data loggers to record nest visitation rates during chick feeding, and the sex was determined from nest video cameras. I also examine if the parents? rate of feeding visits changes over the nestling period.

The southern part of Sweden, Skåne, is frequently exposed to storms causing great damage to Norway spruce (Picea abies L. Karst.) stands. A storm during the winter 1999/2000 raised the attention of the problem. A lot of forest owners got large areas of spruce stands wind thrown during this storm. Can naturally regenerated birch (Betula sp.) be an alternative on these wind-exposed sites? This was the main question I was facing when discussilig the problems with Esben Möller Madsen, Söderåsens forest district. The aim of this master thesis was to present an economic analysis of Norway spruce versus birch.

The aim of this work is to demonstrate how the net present value (NPV) at the time of the first thinning depends on the spacing after pre-commercial thinning, and show how net value from first thinning in same stand is influenced. This study is performed with models based on non-distant dependent growth models for single trees. Two different growth models have been used, one for cleaning (pre-commercial thinning) and one for thinning. The first one yields stem density distributed over diameter classes. In the second one, (the thinning model), it is possible to choose when thinning should be done, the thinning method, thinning grade and numbers of thinning.

To make wave power more competitive on the market Uppsala University leads projects that examine how to accomplish better efficiency in the production. One of these projects is described in this report and examines whether it is possible to make the production of dovetails more efficient by using an industry robot of type ABB IRB6000 S3 M91. This project is using an already presented working method, from a previous project, which involves that the robot picks up the dovetail and moves against fixed cutting machines where the dovetail will be drilled, threaded and milled. Drilling and threading are the sub operations that will be examined in this project where experiments are made with the presented working method and with equipment from Uppsala University.Experiments show whether it is possible to drill the holes in the dovetail within specifications by using the specific robot and the presented working method. The threading operation is examined theoretically if it is possible to accomplish by using the same working method.

In the last few years people have become more and more aware of how humanity is affecting the climate. In the direction of reducing the greenhouse gases is to design engines with higher tensile properties and reduced weight, in order to achieve lower fuel consumption and cleaner fuel incineration in today's truck engines.In order to achieve these requirements it?s necessary to increase the combustion pressure in the engine. This requires higher tensile properties and high thermal conductivity of the engine material. The department of Component Technology at the University of Jönköping in collaboration with Volvo Powertrain AB, Scania CV AB and DAROS Piston Rings AB has been commissioned to develop this material and to find knowledge of material properties used in truck engines and piston rings used for marine applications.The purpose with this work is to analyze the tensile properties of a series of cast iron, cast under different metallurgical conditions.Four different series of cast irons have been analyzed from four points of view, carbon concentration, nodularity, amount inoculation and cooling rate.After the tensile test all specimen data was analyzed in a mathematic calculation program called Matlab 2006a.

AbstractPrevious studies have shown that wild smolt have 2.5-4.5 times higher survival rate than smolt grown in culture and that starved reared smolt behave more like wild born smolt. The purpose of this project was to study whether there are differences in migration patterns and survival during migration to the coast between wild and reared smolt and between different types of reared smolt.In 2009, 25 smolts in three different groups were tagged with acoustic transmitters: Wild Born, conventionally reared 2-year and 1 ?year old smolt. For the 2010 trial there was also added a group of reared 2 ?year old smolt that were starved before release.

PurposeThe purpose of this study is to investigate whether a combination of product placement and traditional advertising can enhance the company's marketing. We perform this study because we believe that the consumers consider traditional marketing in many cases obsolete.TheoryThe study?s theory consists of topics and terms of product placement, traditional marketing, branding and communications. Theories used in this study were the basis to answer the study's research question using empirical data gathered during the study.MethodThe study has a deductive approach with a qualitative focus, therefore, the study is based on existing research, which was later to use for the data extracted from the interviews. The approach is going to show differences and similarities between how it looks in reality versus theory.ConclusionThe results of this study show that product placement can increase the efficiency of traditional marketing.

Influenza is a viral infection that affects global health and economy with its endemic and sometimes pandemic spread. Rapid detection of Influenza viruses enables antiviral use and can bring financial savings. It is also essential for the global surveillance of prevalent Influenza strains. RT-PCR is considered the most specific and sensitive method for detection of Influenza, but Influenza mutates at a high rate and it is therefore crucial that RT-PCR methods are updated regularly.In 2014, Cepheid released their Xpert Flu/RSV XC assay, which can detect Influenza A and B and RSV by multiplex RT-PCR in approximately one hour. The aim of this study was to evaluate this assay at Laboratoriemedicin Västernorrland by using the laboratory?s previous PCR assay for detection of Influenza viruses as reference method.Real-time RT-PCR was used to compare Xpert Flu/RSV XC to the reference method.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

AimThe purpose of this study is to compare the level of activity between playing wii Sports Tennis and wii Sports boxing, and the usual sports, and to see how the two variants are perceived.Issues:- How much strain ratio and energy consumption it gives to exercise wii sports compared with the playing of sport for real?- How do the test participants experience the different tests?- How are the two wii sports games against each other in terms of activity and fitness in the school environment?MethodThis is an experimental study in which 10 test participants (5 men and 5 women) have carried out four different physical tests. The tests consisted of either playing an exergame or playing a sport for 25 minutes. Physical activity was measured during the test using a heart rate monitor. All test participants completed all tests in the same order.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.