In this thesis a possible cost effective runner change of some of the units in the hydroelectric power station Olidan is investigated. The possibility to drive a unit at the same efficiency point through a change of the turbine shaft speed and the rate of discharge is tested. Furthermore the theories behind model testing, determination of efficiency increase from model to prototype and efficiency measurements shall be discussed and analyzed with Olidan as a starting point.A predicted curve has been built on information from model tests and field measurements on the existing runners and runner data from the test of the new model. The predicted curve shows the difference in efficiency between an existing runner and a modern one. It is the difference in efficiency that is used in the calculations that are to show whether changing to a pair of new runners will be cost effective or not.

This quantitative study explores how employee perceived efficiency within customer service is affected by standardized routines, digital tools, and motivational factors. The study is based on survey data collected from 42 employees across five customer service departments in a larger organization. The theoretical foundation integrates Weber?s bureaucracy theory, the Technology Acceptance Model (TAM), and the Job Characteristics Model (JCM), allowing for a multidimensional analysis to capture the employees' experiences of efficiency. Findings reveal a statistically significant positive relationship between perceived efficiency and both standardized routines and perceived digital tool usefulness and ease of use. Furthermore, the study identifies that skill variety and task significance are positively correlated with experienced meaningfulness, which indicates a potential mediating relationship between these motivational aspects and perceived efficiency.

This thesis investigates the regulation of hybrid work environments by focusing on the implementation of rules by both management and employees. It examines the methods used to measure compliance and the consequences of non-compliance within organizations. The study also explores how flexibility in work arrangements and the balance between work and personal life affect employee well-being and productivity. Furthermore, it highlights the critical role of self-leadership in navigating the complexities of hybrid work, emphasizing how effective self-management can enhance organizational efficiency and employee satisfaction. We have adopted a qualitative research approach and interviewed employees, managers, and HR personnel with experience in hybrid work. The different perspectives are expected to provide insights into this area by including all levels within an organization It is evident that organizations that have clearly established rules and guidelines regarding hybrid work have achieved the best desired results.

Sweden?s energy consumption is divided into three major sectors. One of them is the industry sector. One third of Sweden?s energy consumption is converted in the industries.

The Swedish Government has set a target to reduce energy consumption through energy efficiency within the construction and real estate sector. The purpose of the study is to examine how energy efficiency within this sector could affect the district heating volume in the future, on basis of Vattenfalls district heating system in Uppsala.An Excel model has been created to study how energy effficiency measures affects district heating demand in buildings by 2045, based on technical and economicalconditions. Furthermore, an interview study has been conducted to examine incentives for district heating customers to invest in energy efficiency measures.Result of the Excel model shows that the district heating volume of Vattenfall in 2045 is expected to 931 GWh, which corresponds to a volume decrease of 10,6 %. Based on the study?s theoretical framework only 15 %, 1 024 GWh, of the technical-economical potential is assumed to be implemented.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

In today?s fast growing and closely connected society, a reliable and energy efficient transportation system is more than ever desirable. Nowadays the significant part of the transportation sector?s energy demand is supplied by fossil fuels.Improving energy efficiency in combustion engines will result in reduction of fuel consumption and CO2 emissions. A modern internal combustion engine has an efficiency of 30-45 %, where the most energy loss occurs as result of heat losses in the exhaust and cooling systems.

The aim of this report is to analyse the use of the capacity at the CNC (computer numerical control) cutters and show how the level of set up time for these cutters at Stålöv AB. This assignment is concrete whereas there are no subjective questions to this matter and there are only cold figures presented.Production economy is getting more important as the competition hardens and there are several different ways to increase productivity and efficiency in a company. In order to increase productivity and efficiency work studies are used to, through an analysis, find developments in methods that result in improved work methods and to establish the time that are used. Increased production of different parts and customer driven production in combination with increased demands on rationalisation of capital have led to an enlarged interest for shorter set up times in the production.To point out the use of capacity and the set up time of the cutters at Stålöv AB we used frequency studies. Frequency studies are work measure methods based on random observations on predetermined events to calculate the relative occurrence of these events.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

In this master's thesis the problem of determining the uncertainty for an estimator of an unknown parameter is considered. The case we study is the estimation of gravity using a reversible pendulum. This involves the estimation of the point where two regression lines intersect. The estimated gravity is a function the coordinates of this point. One way to determine the uncertainty of this estimator is to use bootstrap methods.

Title: Audit teams ? what affects the efficiency?Authors: Petter Johansson and David RubinSupervisor: Andreas JanssonCourse: Dissertation Accounting, 4FE03E, 30 ECTS, Spring 2011.Key Words: Audit team, Efficiency, Team WorkBackground and problem: Theory and literature in the field of audit teams?efficiency are limited. The theory and literature that existed was not conducted inSwedish context. It was identified that no one had examined the factors thatinfluence the efficiency of the Swedish audit team's. Efficiency affects howresource-and cost-effective an auditing firm can be while the audit is performedwith quality and therefore it is of interest to be examined.Purpose: The purpose of this thesis is to explore and explain what may affectSwedish audit teams? efficiency during the work processMethod: The thesis has been based on existing theory and literature to explainwhat affects audit teams? effectiveness.

In today?s computerized society more and more companies choose to utilize new applications that can ease the way of handling the information. For many of us is imperative that the process as efficient as possible if one takes in consideration the size of savings that this new application can bring.The developer of the evaluated system is SYSteam AB Huskvarna and they are the ones that gave us this assignment. The application that we evaluate is SCM (Secure Connection Manager). It is already used today by big companies such as Telia and Ericsson to search for errors in telephone servers placed all over the country.

The aim of this thesis was to answer a number of questions about the environmental consequences of aircraft de-icing. A further aim was to suggest how the environmental consequences due to the release of de-icing fluids can be measured and reduced.The main impact of the aircraft de-icing on the environment is due to the large oxygen demand for the degradation of glycol based de-icing fluids which are released in the environment. The effect of the increase in oxygen demand depends on where the degradation occurs in the ecosystem. In a sensitive ecosystem, the large demand of oxygen could provide an anaerobic environment which would be harmful for many types of organisms.In order to reduce the negative effects of the applied de-icing fluid, there is some type of collection system at every regular airport in Sweden. The methods of collection can be divided into two general groups, hydrological isolation or vacuum sweeper trucks.

This thesis has been focused around the Diels Alder reaction with the goal to design an enzyme catalyzed reaction pathway. To achieve this goal computer aided enzyme design was utilized. Common traditional methods of computational chemistry (B3LYP, MP2) do not do well when calculating reaction barriers or even reaction energies for the Diels Alder reaction. New calcu- lation methods were developed and tested. This was the focus of the first part of the thesis, by choosing a small system, extensive and heavy calculations could be done with CBS-QB3.

Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.