In the next few years the pollutants loading at the Slottshagen wastewater treatment plant in Norrköping is going to increase due to the reason that one of the waste water treatment plant in the district will be shut down.A survey of how these different pollutants are divided in the treatment process is therefore necessary for mapping out both the loading and treatment efficiency.This can be achieved by studying mass balances.Mass balances were carried out for the water treatment process for the mechanical/chemical,biological and the chemical stage.The mass balance studies show that the treatment efficiency was very good. However in order for the mass balances to be quite consistent and to ensure complete coverage of results and conclusions i.e. more reliable results, sludge samples should be collected and taken at different times per day and the influent rate should be investigated.In this work mass balance has been set up in order to illustrate and identify the factors that should be considered and taken care of for further estimation using mass balances in the future. Furthermore this survey results in a calculating model for the mass balances at thisplant.This calculating model is used as a tool to facilitate future calculations for mass balances for the water treatment process at Slottshagens wastewater treatment plant.Moreover it provides a basis for carrying out further estimation of the treatment process in the near future.In this project the importance of some operating parameters was also taken in consideration.This calculating model can be modified so that calculations of such operating parameters i.e. sludge loading and sludge age can be easily performed.Such information can be used further to evaluate different operation alternative in order to ensure an optimal use of the treatment process with in the plant..

Companies that invest in e-learning have different expectations regarding the outcome of the investment. According to literature and articles it is common that companies see reduction of costs as the primary benefit with e-learning. Therefore we ask ourselves the question if companies have attained the expected benefit of the investment in e-learning and to what extent cost reduction have been a determining factor in the investments? The purpose of the thesis is to examine if companies that invest in e-learning have attained the expected benefits. We also want to examine what the reason for investing in e-learning is and if cost reduction is the primary reason for investing. The study is founded on a qualitative method that is based on a case study in eight companies.

AbstractIn the fall of 2003 a project was started in the Swedish building sector that is called BASTA (the building sectors’ termination of especially harmful substances). The project is operated by the building companies NCC, Skanska, PEAB and JM, the Swedish Building Industry and the Swedish Environmental Institute IVL. The purpose of the project is to create a common environmental assessment system for the entire building industry and with the help of this system phase out the use of especially harmful properties from building products.In a large sense BASTA works like this; On the BASTA web site there is a database, to which a supplier can register the company and the company’s products. Only those products with a substance content that fulfil the demands of the BASTA system, is to be registered. As it is the supplier himself that carries out the registration of the company and the company’s products to the system, the BASTA-organisation annually controls that the companies that are registered in the database, fulfils BASTA’s demands.Since NCC is one of the companies that operates BASTA, BASTA is probably going to be the environmental assessment system that is recommended for the company in the future.

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

The division of Electricity at Uppsala University is developing a wave energy converter(WEC) consisting of a linear generator connected to a bouy at the water surfacethrough a wire cable called the connection line.During extreme conditions, the wave power plant will experience forces up to 500kN, which lead to unnecessary wear and will ultimately cause the failure of theconverter. To prevent this there is a need for a damper.The wave energy converter works at a maximum efficiency when the translator?sare centered with respect to the stator. Due to tidal movements the position of thetranslator can deviate. There for a mechanical divice that will compensate for this isneeded.This report describes the further development of an earlier project where a tidalwave compensator for a wave energy converter of Seabased AB was developed.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

Background: Goodwill has always been frequently discussed and a lot of scientific research has been done regarding factors that affect companies? impairment of goodwill. Previous research has concluded that companies reporting low results are more prone to do impairments of goodwill than companies reporting better results which possibly can be seen as a form of earnings management.Purpose: The purpose of this essay is to examine if goodwill impairments occur to a greater extent among Swedish listed companies when the companies are reporting lower earnings. A subsidiary purpose is to see if there has been an improvement since 2008 regarding the size of reported goodwill in comparison to equity in the years 2009-2011. And to analyze the development of the companies goodwill impairments in relation to reported goodwill.Methodology: Three quantitative studies have been performed for the years 2009-2011 where all the listed companies on NASDAQ OMX Stockholm have been included.

In recent years the construction industry has been exposed to increased time pressure which has resulted in a higher amount of wastage. Today 35 % of all construction projects in Sweden is "wasted". Time pressure has risen due to increased competition on the market, with more actors entering the construction business, therefore profit margins decreased which has led to a more pressing need for decreasing the amount of wastage.Bravida is Scandinavia's largest supplier of installations and provides specialist services in electrical installations (heating and sanitation), and ventilation. Mahdi Bawaqneh's task was to investigate where, how and why wastage occurs in the company's projects and how to prevent such wastage. The thesis covers the subjects of lean production, communication in projects and planning of projects.

The purpose of this randomized controlled study was to investigate the effect of internet- administered guided self-help for women suffering from psychological problems following traumatic childbirth. The eight-week treatment program consisted of written chapters based on cognitive behavioral therapy. 56 participants were randomly assigned to a treatment group (n = 28) or a waiting list group (n = 28).The results showed that post-traumatic symptoms decreased as a result of the treatment, with large within-group effects measured by both the Traumatic Event Scale (TES) (d = 1.33) and the Impact of Event Scale-Revised (IES-R) (d = 1.3). The difference between the groups was only significant when measured by the IES-R in which case the between-group effect was large (d = 0.97). The proportion of the participants who showed clinically significant improvement was considerably greater in the treatment group than in the waiting list group.

The objective of this study is to understand how people with psychiatric diseases who are enrolled at a psychiatric clinic experience the recovery process and which internal motivations and external factors influence the process. The study is based on interviews with five people who have been enrolled at a psychiatric clinic. Another aim of the study is to understand how the importance of the outpatient care for the personal recovery and the improvement opportunities of the support from the rehabilitation unit that the interviewees see. The study is qualitative and abductive approach was chosen. This means that the study is based on empirical data supported by established theories.

SKV and Tullverket have several important tools and methods available in each activity to ensure that taxes and fees are paid and charged rightfully. Among other things they use tax or customs surcharges, targeted and general third party injunctions or targeted and general third party audits. The targeted controls, ergo targeted injunctions and audits, are targeted towards specific persons or documents while during the general controls these are not specified. The methods have repeatedly been the subject of discussions and attempts to simplify the tax procedure and increase the Rule of Law for the individual.The government appointed a commission on March 8 of the year 2012 with the assignment to prepare proposals to increase the Rule of Law in the tax procedure. The assignment was therefore to analyze the areas of tax and customs injunctions, reimbursement because of expenses and agents and also third party controls.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

This thesis investigates how energy is used in three public baths today and suggests measures that could reduce the energy demand. The results show that there is a great poteltial for energy savings i public baths, and that it would be interesting to examine some of the proposed measures further..

Students at Jönköping School of Engineering were given an assignment from Jönköping municipality, to evaluate their decision support system, QlikView. The students have also developed proposals for improvement with focus on usability.The Jönköpings municipality has currently got 11000 employees and consists of nine different administrations. The target group for QlikView is approximately 600 first-line managers.The intention of QlikView is that the users can get an overall picture of their business by having all information in just one system.The purpose of the thesis is to obtain a picture of what the users think about the system today and present relevant suggestions for improvement, which the Jönköping municipality can use when the introduction of the new version of QlikView takes place. The research questions that the study aims to answer are:? Has QlikView got a user friendly interface?? How can the interface be improved to become more user friendly?Theories that this work is based on is Jacob Nielsens ten usability principles and Ben Schneidermans eight golden rules.