An energy calculation model for Swedish houses   that is fast, flexible and user-friendly has been developed within the   framework of this thesis.  The model   also provides a set of actions which may be investigated in the model based   on savings and payback period. Energy use in a house depends on the technical   conditions, such as building envelope and heating systems, which outdoor   climate the house is exposed to and who lives in the house. Energy use for a   house can be divided into heating, hot water and household electricity. There   are several methods to calculate the energy use of a house. This report   summarizes the methods that may be suitable for a fast and user-friendly   calculation model.

Gtherm is an innovation company who has an unique air heat exchanger underdevelopment. The purpose of this thesis is to provide data of suitable motors for theheat exchanger and to find suitable motor suppliers.A motor specification was designed. It is an important basis for the search of suitablemotors. A compilation was made of nine motor suppliers and the suitable motorsfrom those. The compilation can be used by GTherm in their choice of suppliers andmotors.The compilation of the demands on the motor and analysis of suppliers indicated thatthere were no standard motors available to GTherms air heat exchanger.

The question of excessive global energy use needs to be solved. All energy production and usage have negative environmental impacts, which are best solved by reducing energy consumption and by using energy more efficiently. A large part of the Swedish energy use is concentrated to the building sector and to reduce the total energy consumption real efforts need to be made to make buildings more energy efficient.The aim of this study was to investigate how energy is used in one of Göteborg University?s buildings and to find measures that can be taken to improve its energy efficiency. The chosen building Zoologen, is used for research and education.The main method of the study is computer simulations of the present building and of possible energy reducing measures to be made in the future.

This degree project is based on identifying and allocation of costs in a packaging section at Electrolux Distriparts in Torsvik.The purpose of this thesis is to identify the costs that emerge when packaging different articles and show how the costs are allocated. The report also contains improvement suggestions about how the company can use the current computer system more efficient.The methods that have been used in order to approach the problem and the collection of information have mainly been literature study, interviews and observation.The work started with answering the questions; which expenditure cost and direct cost exist in the section, how can they be allocated, if improvement can be done and how the flow of information is supposed to happen.In order to answer the questions we used our former experience and the knowledge we achieved by reading literature, interview relevant persons in the company and observations carried out in the section.Through our studies, we came up with an Excel file, which is the groundwork for a template that can be used by the company in different occasions depending on the situation and need. It is important to remember to modify the template if the presumptions change. In the template, we have identified the different kind of costs that emerge when packaging different articles and we have also allocated the costs. In addition formulas and estimations that are necessary for the cost calculation are presented.The work consisted in making the groundwork for a template.

Background: Low Price-Earnings ratio, low Book-to market ratio and low stock prices can give the impression that a stock is ?cheap?. Is it through systematic use of these portfolio strategies possible to beat the market index ? in other words does financial illusions exist? Purpose: To examine if the Stockholm Stock Exchange is an efficient market. Limitations: The efficiency is tested solely through the chosen portfolio strategies: low Price-Earnings ratio, low Book-to-market ratio and low stock prices.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

The purpose of this thesis is to make a comparative literary study of ten laboratory experiments with different kind of sources for query expansion terms. The experiments are grouped according to categories of term sources, which are: search results, collection dependent knowledge structures, collection independent knowledge structures and one that combines the two last mentioned sources into one. To enable a comparison all other variables were held as constant as possible. There is the improvement measured in mean average precision, which is used to measure the various sources potential. The result from the study shows a strong connection between the kind of source for the expansion term and improvement of the result.

The work is performed at Forsmark Group AB as a final step in the Bachelor ofScience program in nuclear engineering at the University of Uppsala in 2013.The work is part of an ongoing process of streamlining project system model FKA.Streamlining the project model is an important aspect that affects all largecompanies that somehow have a project governing body when there is muchfinancial resources to save. Although the quality of the projects is positivelyaffected by efficiencyThe aim is to find possible common weaknesses and strengths of the project systemby interviewing a number of project managers, and using the systems in placeexamine the model.As part of the work also includes examining what project managers have to adjust tothe newly implemented system VPMM, and other newly introduced elements thathave been added to improve the efficiency in the futureProject System is a complex system that is influenced by many different parametersand participating individuals' attitude and personality. But then small changes in themodel could have major economic consequences.The thesis has generated results that show common weaknesses among the variousprojects and their project managers' general opinions about the project model. It alsopresents some possible solutions based on own thoughts and those interviewedobjects suggestions and comments..

The purpose of this study has been to evaluate whether a Low temperature bio-mass dryer could be integrated with the local district heating system in Malå. The aim is to increase the thermal efficiency of the cogeneration plant in Malå, by lowering the temperature of the cooling medium. Another benefit that comes from this is improved combustion efficiency at the power plant, since drying the fuel causes an Increase of the heating value.Simulations has been made in Excel, and with use of linear regression, to find out if it is profitable. Data for this purpose has been supplied by the power company Skellefteåkraft and furthermore SMHI.The result of the Calculations shows that a very efficient bio-mass dryer is needed, if yield of investments should be made possible. An Investment of 4,27 Mkr, in a dryer, could at a such criterium return 60000 kr/year, if the price of the biomass is 190kr/MWh.

In today?s modern age, energy consumption has become a major issue, both from an environmental viewpoint and cost perspective. Because of a rapid technologic change and increased costs of production of electricity, the demand to develop effective methods for energy efficiency industries have grown.The electricity-intensive industries, such as plastic industry, the demand to reduce energy consumption has grown significantly over the past 10 years, which have led to the development of different methods to determine and locate energy-consuming parts in the industry. This also means being able to prioritize and organize activities in the industry.In this study the measurements of voltage, current, power and PF performance on injection molding machines (K-TEC 275 form Ferromatik Milacron in Germany) with a focus to locate, within a machine, various measures that could improve energy use in the plastics industry, in this case RostiGP in Gislaved. These measurements have been carried out with the help of a power quality clamp meter to carry out time logs of the machines for some time during normal word rate.

This essay discusses and evaluates the international currency market in regards to efficiency. To prove the theory that, the difference between expected and actual exchange rates is explained by the difference in expected and actual interest rates and the difference in expected and actual inflation between countries, a model was developed. This model was inspired by the paper of Sebastian Edwards (1982), and is based on three theories; UIP, IS/LM and the Efficient Markets Hypothesis. The model uses 16 regressions estimated from three pairs of curriencies: $/SEK, £/SEK and ?/SEK.

In the light of new technology health care is now given the opportunity to form a more mobile way of working that would bring about potential gains in terms of efficiency and quality. On the other hand, a more mobile health care also requires a more generous handling of personal information, something that may raise issues in terms of privacy. This study shows that the privacy of the patient requires two things: (i) that the personal information of the patient is handled in a way that generates her an overall positive expected utility and that (ii) the negative expected utility that each risk of an information leakage causes is offset by the expected utility it also makes possible. The first requirement (i) is shown, in comparison with today?s way of working, to be met due to the potential gains in efficiency and quality in combination with no increase in the probability of informational leakage or negative effects of such a leakage. The second requirement (ii) was also considered met since no separate risks of information leakage could be identified that was not offset by the gains it made possible in terms of expected utility..

The purpose of this thesis is to describe how principals apprehend the school library. In order to respond to this I formulated three questions: How was the improvement of the school libraries carried out in one municipality? Is the school library experienced as a part of the schools organization? How is the use of the school´s library experienced? To be able to answer these questions, for the purpose of this thesis, I have studied relevant literature on school libraries, the school organization and literature on qualitative methods. I have made six qualitative interviews. The objects of the interviews were three librarians and three principals.

The aim of this thesis was to investigate how the use of the IT-personnelsystem influences human resources and the new challenges and future requirements that may occur, while IT-personnelsystem is used more extensively in the HR-function.Previous research referred to in this study, has focused on how the HR-transformation has contributed to the development of an IT-personnelsystem, which has been used with increasing frequency. This use has created a significant change in the HR-function. This thesis focuses on investigating, describing and analyzing how the practice and development of the IT-personnelsystem meets the needs of the HR-transformation.This study uses qualitative research methods to investigate sixteen users? experiences and our understanding and conclusion is based on both semi-structured interviews and webb surveys. Initially deductive, later on our study took a more abductive approach.The result indicated a variety of uses for a specific IT-personnelsystem dependent on the users? function and positions and also how HR-activity was organized within the business.

The aim of this thesis was to investigate how the use of the IT-personnelsystem influences human resources and the new challenges and future requirements that may occur, while IT-personnelsystem is used more extensively in the HR-function.Previous research referred to in this study, has focused on how the HR-transformation has contributed to the development of an IT-personnelsystem, which has been used with increasing frequency. This use has created a significant change in the HR-function. This thesis focuses on investigating, describing and analyzing how the practice and development of the IT-personnelsystem meets the needs of the HR-transformation.This study uses qualitative research methods to investigate sixteen users? experiences and our understanding and conclusion is based on both semi-structured interviews and webb surveys. Initially deductive, later on our study took a more abductive approach.The result indicated a variety of uses for a specific IT-personnelsystem dependent on the users? function and positions and also how HR-activity was organized within the business.