This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

The Goal with this Master of Science thesis is to expand the possible turbine efficiencymeasurements on an exhaust turbocharger. It was done as a part of the CICERO competencecentre. To feed the turbine with air a special flow rig has been used. Instead of loading theturbine by just restricting the compressor flow a docking system for an electrical dynamometer isdesigned to use the dynamometer as an additional loading source. By using an electricaldynamometer as loading device for the turbine, measurements are not depending on compressorperformance.A large part of the work consists in designing accessories for the dynamometer.

This thesis examines the environmental benefits resulting from the choice of environmental certification scheme, with focus on energy. This was carried out by studying the measures that were implemented as a result of the certification of Sweco's three largest office buildings in Stockholm, Gothenburg and Malmö. The office property in Stockholm has been certified with the Swedish Environmental Building, Gothenburg with the British BREEAM and Malmö with the U.S system LEED.The results from the study indicate that an environmental certification can reduce the energy consumption by up to 59 percent and the water consumption by 20 to 66 percent. However; the interviews, literature study and simulations in MATLAB indicate that the size and scope of these environmental benefits depend on several identified factors: the type of building and its conditions, system selection, grade level, the choice of indicators, the ambition of those involved and when in time the certification process begins. The comparison between Environmental Building, LEED and BREEAM showed that Environmental Building for the office property in Stockholm gave the largest environmental benefit in terms of reduced energy consumption thanks to several large measures.

Deposited waste material degrades within a short period in anaerobic environments. The methane gas that is formed provides a harmful contribute to the greenhouse effect, 23 times larger impact than carbon dioxide. It is therefore desirable to minimize the emissions of methane gas from landfills. This may be achieved by drain the landfill of gas. In this thesis the amount of produced methane gas at the landfill at Örebro has been calculated. Estimations have also been made of the amount of methane gas that might be produced in the landfill in the future.

The purpose with this study was to see the relation between gymnastic pause and concentration to find out the students in a first grade experiences and thoughts about gymnastic pauses in the classroom. I have made a qualitative study to fulfill my purpose, I have observed students before and after the gymnastic pauses, carried through gymnastic pauses with the pupils and interviewed pupils in group.Previous research shows that the good working atmosphere and concentration has improved when pupils have had gymnastic pauses but it is difficult to say how it looks in the long term when the research doesn?t show that.In my study, it appears that the gymnastic pauses make it calmer in the classroom. Some of the pupils believe that they have had a better ability to concentrate after the gymnastic pauses while some pupils believe that they have not had a better ability to concentrate. Some pupils say it's good to get a break to carry on with the schoolwork during the entire lesson.

This thesis was conducted at Linköping University and Saab Aerostructures DPS, Linköping, and focuses on the possibilities of flexible fixturing in machining applications. The thesis is part of the research project "Koofix", which is collaboration between Linköping University and a number of companies.The thesis is aimed towards small batch production which, for Saab Aerostructures DPS, means diverse part geometry and that parts are manufactured in very small numbers, sometimes just one piece. The result of this is that expensive dedicated fixtures are made for most parts. By introducing more flexible fixturing methods to this kind of production the cost of fixtures and tooling will be reduced, and make the production more efficient.New flexible fixturing methods has been presented and evaluated through the thesis, which has resulted in three different concepts. These concepts have been the result of literature screening and study of current manufacturing process at Saab Aerostructures DPS.

SUMMARYInventory of raw materials holds an important role in companies within the manufacturingsector. The inventory works as a buffer that secure the supply of materials to the productionunit. The aim of the inventory is to ensure that the company is able to meet the customers?demands despite fluctuations and variations in the material flow. The size of the warehouseand the layout are physical limitations for the quantity of articles that can be stored.

This thesis aims to further study the interpersonal risk taking within groups and thereby the importance of a climate promoting a reflective behavior. The increased demand in complexity and exposure towards teamwork leads to increased call for knowledge integration, which can be explained as the ability to integrate the collective knowledge within the group. We have therefor identified a need for better understanding what makes a group more effective. Key factors for self-estimated effective collaboration have been shown to be a group's reflective behavior and ability to coordinate the skills that each individual possesses. These factors are greatly affected by the psychological safety within the team.

The aim of the study was to do an analysis about the conceptions of units and unit con-version. Investigating the students´ attitudes towards their own mathematical ability and the students´ understanding of the conception of units..

This report is written in cooperation with the Swedish National Road Administration South-Eastern Region in Jönköping. The report is a result of the evaluation to give an answer to the question about how well the function contract has been carried out on the E4 in Östergötlands and Jönköpings län. The evaluation is divided in two hard parameters and one soft.The Swedish National Road Administration is interested in knowing how the standard on the road have been changed during the functions period, which is the reason why the first hard parameter is considering road standard. To evaluate the standard there have been a comparison of values from measures taken every year on the current road stretch. The second hard parameter considers economy.

The essays main intent is to examine whether there has been a proper implementation of the Council?s directive 1999/70/EG into Swedish law regarding the requirement for measures to prevent the abuse of successive fixed-term employment contracts. To achieve this purpose there is a need for an examination of current law. The essay also has some secondary purposes. One of these secondary purposes is the question of whether the implementation of the Council?s directive 1999/70/EG has lead to a reduction of the workers employment protection, which is closely connected to my main question and the violation case.

This essay examines whether feminist theory can give a plausible answer to the question: does female and male students have different attitudes towards the labour market and towards wages? Further more, I examine if factors such as class and ethnicity affect student's attitudes. These questions are investigated through a quantitative study of students at four educations on two different universities in Sweden. Two of the educations have a high degree of female students, and the other two represent educations with at high degree of male students.The main conclusion is based on the quantitative research results. Female and male student's attitudes are similar in some cases.

The aim of this thesis is to describe and analyze the geographical distribution of everyday criminality in the town of Borlänge during the year 2002 and to analyze which measures to be taken in the physical social planning to decrease this everyday criminality there. The term everyday criminality is here to be understood as those categories of crime that appear most frequently in the records of reports to the police every year. Here two kinds of crime have been in focus, thefts from cars and office burglary.In fulfilling this aim two main questions have been answered. The first one is how the everyday criminality was distributed geographically in the town of Borlänge during the year 2002. The second one is which measures to be taken in the physical social planning to decrease this everyday criminality in the town of Borlänge.In order to answer the first question a spatial autocorrelation analysis, Local Moran LISA has been used.

Animal welfare is impaired if the diet does not provide sufficient feeling of satiety or the ability to perform natural feeding behavior. Pigs are omnivores and spend most of the day searching for food by rooting, grazing and chewing. Both inability to perform foraging behavior and insufficient feeling of satiety often leads to direction of foraging behavior towards stereotyped and abnormal oral behavior. Dry sows are often fed restrictively which leads to unsatisfied feeling of hunger. Dietary fiber has been found to reduce stereotypic and abnormal behavior as well as aggression, which could indicate that pigs need to forage has been met giving a feeling of satiety.

Chewing behaviour includes both eating and ruminating activity. Chewing behaviour is of great importance for the feed intake as through the action of chewing (i.e. eating and ruminating) animals mechanically process the forages in small particle sizes and prepare the food for digestion. As cattle grow the chewing behaviour changes along with increasing body weight and chewing efficiency is increased. The aim of this thesis was to review the available scientific literature in order to describe chewing behaviour in growing cattle, as well as the factors that affect this behaviour.