Continuously grazed grasslands have remarkably high plant species diversity. In Sweden this type of habitat has declined for the last two centuries. Changed land use has caused habitat fragmentation and loss of habitat quality. This has caused a great number of plant species to end up on the verge of extinction. To try to save this unique habitat and the species that are tied to it, lots of resources are laid on restoration of abandoned grasslands. In this study, plant species richness of continuously grazed, abandoned and restored grasslands were related to degree of overgrowth, time since overgrowth started and rate of overgrowth.

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

In the late 20th century the Soviet Union collapsed and the eastern European countries were freed from the communist Russian oppression. However, during the Soviet period Marxism was a recurring life stance in the Swedish textbooks for religious education in the gymnasieskola. Today the Soviet Union has collapsed, but the Marxist philosophy has had a huge effect on both single individuals and the modern society as a whole. Nonetheless, the Marxist life stance is nowadays often being replaced by other non- religious life stances in the textbooks of religious education.Therefore, this analysis is a hermeneutic study of the presentation of the Marxist life stance in textbooks for Swedish religious education. The purpose of the paper is to investigate how these textbooks portray the Marxist life stance, and to prove that the societal context and the individual author have an immense effect in the portrayal of both religions and life stances in religious education.

The short term effect of phosphorus in sewage sludge was investigated to establish howmuch of this a farmer can grant him- or herself, if using sewage sludge as a phosphorusfertilizer. Possible differences in plant availability between sludge phosphorus precipitatedby iron, aluminum or calcium integrations were studied in a sandy soil at two pH levels.The sludges were analyzed using pot and incubation trials. As the intention was to investigategrowth limitation due to phosphorus deficiency, a soil with low phosphorus supplywas chosen as well as a low phosphorus application rate. Sludge corresponding to 12kg phosphorus per hectare was applied. Treatments fertilized by sludge were compared totreatments where 0, 6 and 12 kg phosphorus per hectare from mineral fertilizer was applied.Every treatment was replicated six times.

Background: 2007 there was 42 000 fall related accidents in Sweden and they are expected to increase the next few years. Fall among elders results in both increasing economically costs and suffering, but they can be prevented. For example has physical exercise shown an increasing effect on the risk for falls. Aim: The aim of this literature review was to investigate what influence Tai Chi has on the risk for falling among elder. Method: A literature review was conducted where eleven scientific articles were analysed with inspiration of the content analysis.

Purpose: To examine the hearing environment for tattoo artists regarding occupational noiseand to see whether tattoo artists are exposed to hazardous noise according to Swedish WorkEnvironment Authority regulations. Method: Using a dosimeter we measured a total ofseven sessions of approximately one hour on seven different subjects, located on five studiosin Gothenburg. As a complement we did also hand out surveys based on twelve questions toexamine habits, experienced sound environment and to see if there were any hearing relatedpatterns. Results:. Sound level measurements showed that the lower exposure action valueLpAeq,8h 80 dB(A) in one case was reached if applied to the average working time of sixhours.

The Yara N-Tester is a handheld chlorophyll meter which can be used in several different crops as an aid to determine if there is a need of complementary fertilization with nitrogen (N) or not. If the crop requires more N the N-Tester will recommend an amount in kg per ha. The possibility to assess the need of N depends on the strong relation that exists between chlorophyll- and N-concentration in the leaves of plants. In the multiannual trial series ?Nitrogen to winter wheat at different soil conditions? measurements with the N-Tester was carried out at flag leaf emergence (GS 37). In this work the result of measurements, the NTesters ability to estimate the need of N in winter wheat, will be presented for the years 2008-2011.

Sweden has a growing proportion of children living in a multilingual environment. It is thus highly important that caretakers as well as professionals who meet these children have knowledge of multilingualism and its impact on language development. Also, an increase of referrals of multilingual children with suspected language impairment to speech and language pathology clinics is seen.The objective of this study was to investigate the linguistic ability in both Swedish and Arabic in a four year old child with suspected language impairment. A further aim was to implement an intensive intervention and evaluate the efficacy of it. Language testing in both languages showed that the boy?s greatest need was in the lexical domain.

Changing of the hoof angle is a common method for the treatment of many lameness-related conditions (Moyer 1980; Stashak 2002). Various studies in the literature have indicated different results of the effect of changing the hoof angle on the movement of the distal limb. Our study investigated the effect of raising the heel of the forelimbs by 10,7 mm on the movement of the distal limb. Horses trotted on a treadmill at several predetermined speeds. The kinematics of the distal limb was determined and variables including the extension of the fetlock joint were determined.

The background to the study is that within the next ten years about 50 new multi-purposeindoor arenas will be built. These are used for various events such as sports, concerts, etc. In order to achieve a high level of security in the case of danger alarm signals and alarmmessages must be heard well by the visitors. ÅF-Ingemansson wanted to show builders the importance of good speech perception and that it is not observed in arenas today. They conducted technical tests on two large multi purpose indoor arenas to develop parameters that affect speech perception in the arena.To get a subjective view of how these arenas are experienced a survey was created.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

The goal of this thesis is to analyse whether the method ?Observiaire? is of any use for traffic analysis. The method consists of analysing film material, preferably before and after changes are made to an area, by answering a survey for the users that are observed within the population. The method also opens up for deeper qualitative analyses which are rooted in the quantitative data collected from the survey-study. In this study we analyse the method by applying it to the case study of the changes made at Götgatan in Stockholm, where a green wave was implemented and the bicycle road widened.

This report describes a Bachelor thesis work in which a robotised laser welding cell has been modelled and simulated for the purpose of making a presentation movie. The report shows that the work has been concentrated on making the movie from the modelling phase through the recording of the movie and ending up with the editing of the final presentation movie. A pre-study was made prior the Bachelor thesis work. In the pre-study a literature study was conducted about measurement and calibration of a welding cell. Measurement of almost all equipment in the entire cell was also conducted in the pre-study.

This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

This study investigates a method for identifying human capital and its effect on company valuation. We devise a measure for the efficiency of human capital based on the personnel cost. We include all companies listed in the financial and industry sector on Nasdaq OMX Stockholm in an attempt to examine human capital and its effect on firm valuation. Our results indicate that a higher efficiency of human capital has a positive effect on return on assets. However, we find that our measure can be interpreted in two ways; either as a firm?s level of human capital efficiency or its dependency on human capital, to achieve its net sales and revenue.