After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

After been told that an ordinary winter service for our combine should cost more than 20000 SEK, not included spare parts, I decided to write this paper about today?s requirement of the workshop on a farm. I think that the lack of proper premises is the reason way not more of the ordinary machinery maintenance or upkeep is performed on the farm. When I did my literature survey I found that the Swedish environmental code, set by the Swedish law regulate how drain or sewer should be built. The environmental code however leaves a lot for your own interpretation. It might not be so bad but it must be very hard for the local environmental office to interpretation the regulations, since they are the ones that gives permission for the sewer in your workshop.

One of the main goals of the national curriculum is to encourage children?s personal opinion and support them in development of argumentation ability and communication skills. All this is very important for the children as members of the future society.The purpose of this essay is to investigate how primary school teachers estimate the meaning of the pupil?s argumentation as well as which methods and approaches are assumed by the teachers to be most appropriate for children?s argumentation development. The study also considers the questions how the teachers motivate their pupil has to argue in the classroom and how the students by themselves understand the concept of argumentation.

There is a clear difference between the way football players and leaders regard the role of the referee, compared to the way the refereeing body looks at it. The refereeing body regard themselves as fundamental for the existence of the sport, while the other mentioned parties merely see them as functional justice makers. This view places the referees outside the field of football. This establishes a football culture, which is conflicted when it comes to the role of the referees on the field. The conflict comes to its edge in youth football, where the referees are under severe pressure.

In 1996 a hunting test for British gun dogs was started in Sweden, based on a similar one al-ready in place in Norway. The aim of the new test was to describe the hunting ability of the dog and to use the results as a basis for selection. However, up to now, no genetic study of these data has been done. Therefore the aim of this study was to estimate genetic parameters for the traits measured in the hunting test and to investigate whether the traits can summarized into fewer overall measures. Data from trails of British gundogs between 1996 and 2005 in Sweden were used to estimate genetic parameters and environmental effects in hunting performance. British gundogs consist of five different breeds: Pointer, English setter (ES), Gordon setter (GS), Irish red setter (Irl S) and Irish red and white setter.

High-precision cutting in metal is very complicated, a lot of parameters affect the result: what geometries to be manufactured, surface roughness and tolerances to be achieved, batch size etcetera. When pull-broaching internal parts this might be even more important, than in any other cutting operation. Everything is machined in one single stroke and the general technology is built in to the tool, therefore big investments must be made to change the process. Milling for an example: one piece at a time is machined away, and a lot of parameters can be changed easily.It is very high pressure on the cutting-edge when the broach is cutting. To achieve the specified product and to avoid unnecessary toolwear it is essential to use the right cuttingfluid and the right cuttingspeed for an example.

Wind damages next to strip roads in 1st and 2nd thinning in Boxholm, Östergötland Anneli Fransson, SLU, inst f sydsvensk skogsvetenskap, Examensarbete no 108 Wind damage is something we are all familiar with since the storms Gudrun (2005) and Per (2007). Research about strip roads and wind damage is very limited. It is commonly known that the trees next to the strip roads more often fall whit heavy winds, and the purpose of this thesis was to verify this statement. Data was collected from first- and second thinnings at Boxholms Skogar AB, Östergötland. In first thinnings data was collected from both spruce and pine stands and second thinnings only data from spruce stands was collected.

The Blötberget deposit is situated in the north-western part of Bergslagen. The mineralization is an apatite-iron oxide ore of Kiruna type. In Bergslagen the apatite-iron oxide ores occur along a zone from Grängesberg through Blötberget to Idkerberget in the northeast and they represent the largest and the most important iron oxide deposit in Sweden, south of Norrbotten.Different REE hosting phosphate phases has been studied by optical microscopy and analyzed by EDS attached to an electron microscope.The key minerals other than iron oxides are apatite, monazite and xenotime. The relative concentration of the REE-bearing phases differs from the other apatite-iron oxide mineralizations in the area, for example Grängesberg, by a higher concentration of xenotime and lower contents of allanite..

The interest for organic food has grown a lot over the last 15 years. Even so, only 3.5 % ofthe share of wallet in Sweden goes to organic food. The purpose of this study is to examine and describe how retailers can get consumers to buy more organic fruits and vegetables. The study was carried out by visiting six Coop Konsum-stores, of which three performed poorly and three performed well in organic sales. We conducted interviews with the department managers, customer surveys and in-store observations.

An airline company that operates with its fleet needs to ensure that maintenance of a following and certain standard will be implemented. In this project we have sorted and divided the various working procedures of Malmö Aviation into Work Packs. These procedures are mandatory and must therefore be implemented in order to keep the aircraft airworthy at any time. Our task was to optimize and sort these working procedures by zone, panels, access and down time. We have created a maintenance program which Malmö Aviation can use and we have sorted their working procedures in B and C- Checks.Maintenance procedures that did not fit into our Work Packs have been gathered and sent back to Malmö Aviation for further inspection.This project has required a lot of extra reading in manuals and we have had a great insight into the complexity of a technical organization such as Malmö Aviation..

This is a work that look at the factors that affect future monthly costs when buying a house in Sweden and which options are the most financially favorable over a 30 year period. The work also examines whether it is economically beneficial to invest in a low-energy house regardless of geographic location in Sweden, and discuss about whether a calculation template can help individuals to choose more environmentally friendly options. The work has been limited so that a certain number of predetermined factors and its measurable values have been developed with the help of a literature study. The factors chosen are building type, climate, heating systems, loan interest rates, energy prices, energy price increases, inflation rates and down payment. These are then combined into 72 different calculation cases which get put in a calculation model made in excel.

Det huvudsakliga syftet med denna rapport var att undersöka några av marknadens brandväggsprogram som kunde tänkas vara lämpliga för vår målgrupp, det vill säga en hemanvändare. Detta eftersom det idag inte finns någon lättillgänglig information inom detta område. I sökandet av brandväggsprogram fann vi en uppsjö av olika typer av brandväggar och därför har denna undersökning avgränsats till endast fyra brandväggsprogram, nämligen Norton Personal Firewall, Sygate Personal Firewall, Tiny Personal Firewall samt Zone Alarm. Denna avgränsning gjordes genom att välja ut de som experter inom området utvärderat och har ansett vara de som är säkerhetsmässigt bäst på marknaden. Undersökningsgruppen bestod av 28 testare som passade in i vår definition av en hemanvändare.

The use of CAD, within the building industry came strongly, during the 1980?s and the 1990?s. The development has since then rapidly progressed and the using of 3D-models has in addition increased. We are now at the edge of next step of evolution. BIM, Building Information Model(ing), is here.

Archaeological findings show that ski manufacturing goes back thousands of years in the Nordic region. There is a wealth of literature and film that deals with the subject, but it can be difficult to get an overall picture of how a specific type of traditional ski has been made. The starting point is the documentary "Skidmakaren i Gielas", where the viewer can follow Alfred Israelsson as he makes a pair of skis out of birch wood. However, the documentary lacks important information about how the skis are actually manufactured. Length, width and certain working steps are disclosed.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .