Sök:

Sökresultat:

1744 Uppsatser om Ecological products - Sida 17 av 117

Armaturfamilj med LED som ljuskälla

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

Kökslampa : tema Fransk Bistro

The report describes the thesis I, Philip Bergstrom, have done at the University of Gotland. The work comprises 15 credits and is at bachelor level and has been done in collaboration with Lyktan Bankeryd Belysning.The project consists of developing the design of a kitchen lamp for the Swedish home following the catchwords stripped French bistro that will fit into the Lyktan Bankeryd lighting spring collection 2013, and it should not look too alike any existing lamp on the market today.The work includes analysis of the company's current products and the image the company wants to project, analysis of three other companies' products to draw inspiration from, and a simple ergonomic study of the lights in the kitchen.The final result achieves the demands made and fits well in the intended environment, there is also the possibility for further development of both a floor lamp and a wall lamp..

Fogar i prefabricerade betongelement

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

Fallföretaget X - Ett grönt företag i tiden

The textile business is one of the oldest industries of our time, and it employs nearly 1.4 million workers within the European Union alone. It is not unusual that this is the foundation of a country?s industrialisation. Even though the industry brings many positive factors, there are also negative factors that will influence the industry?s growth in the future.

Miljömål 17: Hållbar konsumtion : Ett försök att integrera den svenska konsumtionens globala miljöpåverkan med miljömålssystemet

Environmental objective 17: Sustainable consumption - An attempt to integrate the global impact of the Swedish consumption with the environmental objectives system The aim of this report was to integrate the global impact of the Swedish consumption withthe environmental objectives system through presenting a suggestion for a seventeenth environmental objective ? Sustainable consumption. How the Swedish consumption pressures the global environment and methods to measure the affects was investigated. The pressure was divided into five main fields: climate, air, water, land and chemicals. The impacton humans and the biodiversity was also discussed, as well as differences between how men and women affect the environment and get affected when the environment changes.

Bidragsanalys av dimensioner och postningar : en studie vid Vida Alvesta

An old and well known problem in sawmilling is to determine which dimensions /products those are most profitable to produce. Existing optimization models maximize the value of the log. In other words, based upon the market prices of the dimensions the models calculate the best way to split the log. Yet there is a great uncertainty if the most well paid dimensions really are the most profitable to produce. The costs of the process from lumber to sawn products are hard to determine and are therefore often left out from the optimization process. In this study the economic contribution of different dimensions/products are analysed.

Massbalansmodellering av fosfor i ett åländskt kustområde : en utredning om lokaliseringen av Lotsbroverkets utloppsledning

This report is commissioned by the Water and Sewage Agency in The City of Mariehamn, Åland. The basic aim is to investigate positive or negative effects of a relocation of the sewage pipe from a wastewater treatment plant, Lotsbroverket. The environmental licence of Lotsbroverket is to be revised and The Environmental Appeal Board at Åland?s Government and Administrative Board has made demands that several possible locations in an outer water area should be examined. The present location of the sewage pipe is in Svibyviken, which has been classified as an ?inner water area?.The objective of this work is to study to which extent the nutrient loading from Lotsbroverket influence the environmental conditions in Svibyviken, and to investigate the suitability of different locations of the wastewater pipe from Lotsbroverket.The way a coastal area looks, i.e., its morphometry, determines to a large extent its ecological characteristics.

Produktivitetsmodellen : Hur kan detaljhandelsbutiker arbeta med produktivitet och lönsamhet med hjälp av denna modell

The store manager can make great benefits of having an eye on how the staff works towards the customer, because the personnel is an important tool when competing with other stores. This paper is focusing on the part that relates to the staff in the store, which is one of the key tools in the competition for customers after the customer made it to the store. Many stores have guidelines which the staff should follow when they meet with customers. If the staff is too tightly controlled by these guidelines, customers can perceive the first encounter with the staff as artificial and as if the genuine friendliness does not exist. It is important that the staff looks at the individual customer and treat every customer in a personal way and that the staff can see the customer?s needs.

Dagvatten i Märsta : förslag till anläggning för ekologisk hantering samt metodöversikt

Stormwater in urban areas has been treated as a problem for a long time. The large proportion of impermeable surfaces inhibits the water from infiltrating in the ground to the same extent that it does in nature. This causes intensive surface flow during rain, which in turn causes inconveniences such as decreased accessability, floods and increased risk of desease spreading. Drainage through pipes is the traditional and usually functional metod for storm water disposal. That is as long as water flows are moderate. But precipitation varies naturally in amount and intensity and additional impermeable surfaces make some pipes insufficient for heavy or lasting precipitation.

Styrdokument för kontorsbyggnation ur ett ekologiskt hållbarhetsperspektiv : Aspekter och argument

The construction and real estate industry represents a significant part of Sweden's total impact on the environment and mainly affects the following national environmental objectives: reduced climate impact, a good built environment and a non-toxic environment. By establishing internal rules, companies within the industry can reduce their environmental impact. SMT (AB Sandvik Materials Technology), a part of the industrial group Sandvik AB, has set a target that during 2014 develop a guiding document with special consider to the environmental impact during construction of office buildings, that they establish at the Swedish regional capital Sandviken, for both internal and external tenants. This study therefore aims to clarify which environmental aspects that the construction and real estate sector mainly are responsible for, and therefore should be part of a guiding document for a company for establishing office buildings, and to present arguments regarding the use of such a document. The study is based on literature studies and personal contact with other companies, in the form of e-mail conversations and a telephone interview.

Mätning av ekosystemtjänster i jordbrukslandskapet :

Abstract In order to make the modern agriculture less dependent on non-renewable external inputs, it has to rely more on ecosystem services. The agricultural system produce not only food, fiber and fuel, it also generates other ecosystem services such as e.g. photosynthesis, recycling of nutrients, influencing local microclimate, pollination, biological control and detoxification of noxious chemicals. This study is an attempt to get a better understanding about the interaction among different ecosystem services and different habitats capacity to generate them. An evaluation of eight different methods is done. The ecosystem services studied are the ability to absorb solar energy, biomass production, botanical diversity, decomposition and natural predation of aphids.

Grafisk profilering för butiksmiljö : Creating a visual identity for a store

A new visual identity for the ski store Alpingaraget in Stockholm has been proposed as the result of this thesis. Theproposal includes a new logotype, various printed matters, design planning of the store, interior design, signs and otherapplications.The theory section is within the field of graphic profiling and with some focus on profiling in stores.A clear visual identity is important for a company because what the company communicates internally and externallyshould be kept as consistent as possible. This is especially important nowadays when more and more similar products andstores are available. This means that the visual identity becomes part of the competition with other products and stores.The base elements in a visual identity are logotype, colors and typograpy. Using these elements according to rules andtemplates makes a consistent visual profile..

Manlighet på burk - En kvalitativ studie om relationer och konsumentbarriärer inom kategorin manlig hudvård

The beauty industry has experienced a turnover increase of 220 % the last 20 years (Jones, 2010). At the moment the market for men's skin care is seeing the fastest growth rate in the cosmetic industry and multinational companies such as Procter and Gamble and L'Oréal have identified a "multibillion-dollar potential" within the segment. BUT - fresh research from the category leading company L'Oréal, shows that only 48 % of the male consumers use a skin care product specially adapted for men. It further shows that as many as 28 % of these do not even know how that skin care product got into their bathroom cabinet. The purpose of this paper is to get a deeper insight into men's relationship with skin care products and grooming.

If you can?t beat them, join them : En studie rörande producenters påverkan av egna märkesvaror inom dagligvaruhandeln

Recently, retailers within the Swedish grocery retail sector have launched lines of products under its own brand, quite often produced by manufactures within the same category of products. The common term of this phenomenon is called private labels. Therefore, private labels could be seen as competitors against branded goods, despite the fact that it is, in several cases, the same manufacturer who produces each of the products.The main purpose of this study is to provide understanding of how the manufacturers choose to position themselves, formulate their strategies and compete on the market among private labels, also to examine the motive behind the manufacturer's choice to produce private labels. The study intends to provide a broader view of how the interaction between manufacturers, retailers, private labels and branded goods appears on the Swedish market. We decided to use a qualitative research method and personal interviews to approach the study.

Materialhantering till och från robot

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

<- Föregående sida 17 Nästa sida ->