This master thesis was initiated with the aim to answer at what level of installed capacity of wind power in the northern parts of Sweden it would be beneficial to improve the transmission capacity from the northern Sweden. During the process of this work the aim has changed to try and create a model that can be used to analyze how well the hydro power installed in the northern Sweden can even out the quick changes in wind power production.To create a good model of all hydro power in northern Sweden is a very large job, unfortunately too large for a master thesis. This report therefore ends with an extensive analysis of the simplifications that have been made and their effects as well as a list of the future work that has to be done.The model that has been created have shown to be effective and produce good results. The conclusions that can be made is that the northern Swedish hydro power have very good possibilities to balance the wind power production. Only a few cases where water have been spilled even though there has been some free capacity has been discovered.

Frölunda-Aspvik Säteri, a company just outside Stockholm within the agriculture and forestry sector, has developed a business idea around countryside tourism as a complement to their existing business. The idea is to offer a high quality and functional way of living in small cottages surrounded by beautiful nature and landscape of cultural importance. There will also be a range of additional activities available such as hunting, canoeing, cycling etc. The project should be done with minimum impact on the surrounding environment and the importance of the ecological system should be at the forefront of all business decisions. At present the company wants to have a better understanding of what the future trends are within tourism, how its business idea fits in with future trends within tourism and how to stay competitive.The purpose of this research paper is to identify the social driving forces that have an impact on people?s lifestyle and choice of holiday destination in the future, and present how these factors affect the travel industry.

Using the Introductory Carbon Balance Model, ICBM, five different crop rotations with rye 1. Rye-Ley-Ley-Rye-Beans-Rye 2. Rye-Rye-Rapeseed-Rapeseed 3. Rye-Ley-Ley-Rye-Potatoes-Rye 4. Rye-Rye-Potatoes-Wheat 5. Rye-Rye-Potatoes-Beans-Wheat-Rye-Potatoes-Rapeseed were tested theoretically in four different cultivation scenarios ? Straw left on the field, biogas digestate added as fertilizer. Labelled ?+straw+BD?. ? Straw left on the field, only synthetic fertilizer. Labelled ?+straw-BD?. ? Straw harvested, biogas digestate added as fertilizer.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

Modern sawmills are using the raw-material and the production-capacity more efficiently today, due to rising raw-material prices and higher production costs. Log sweepness has a negative effect on the sawn yield, for sawmills with straight-sawing. It is desirable that these logs could be sorted based on more criteria, if it increases value-yield and consequently the utilization of raw-material. Bow-heights over 1 cm have a negative effect on sawn yield, since the surface of the mantle cuts down in the sawn pattern. Some of these small bow-heights reduce the logs yield of value which affects the production planning negatively. Nearly half of all the Swedish logs have a bow-height over 1 cm.

Sweden is dependent on secure sea transport. Shorter disruption of imports of fuel and crude oil can be managed with an emergency stock, but a prolonged halt in imports creates problems. For industry, the vulnerability is greater. Fragmented production chains in combination with expenditure reductions in inventory causes a dependency on proper transport of intermediate goods in the manufacturing industry. A lengthy disruption thus involves disruption of production for both domestic consumption and for export goods containing imported parts.In order to secure shipping routes with a limited number of vessels, Mine Counter Measures (MCM) capacity is required, and according to the Armed Forces, developed with new sensors and autonomous vehicles.

The following is an examination of work and gender and how they interlocked in a Swedishbrewery between 1923 and 1939. Leaning on labor process theory and Marxist feminist theory,this paper examines what constituted women?s work in the brewery industry in this era, how women?s work changed with rationalization and economic recess, and how the all-femaleunion locale reacted to these changes. The events portrayed are related to earlier research ongender on the labor process, to the history of the Swedish labor movement in large, and to theevolution of the so-called ?Swedish model? with its relatively low level of conflicts on thelabor market.

In modern society globalisation is a fact within all industries, the textile industry included. Due to improvement in areas such as logistics and communication international trade have developed fast. As changes occur rapidly on the global market and companies must adjust and revise their processes in order to stay competitive.Because of the global price reduction consumers around the world expect low-price products, which mean that the companies have to find new ways to produce in a cost-efficient way. To maximize profit most of the textile production is situated in low-cost countries due to its labour-intensive character. It is crucial for fashion companies to allocate their activities in their value-chain effectively in order to reduce lead-times.

The trend towards increasingly large farming units raises questions regarding how to better monitor production. Larger units make the impact from possible errors more severe, which increases the pressure on management supervision. To cope with management issues, prevent errors and handle increased demands on traceability and documentation, the Real Time Location Systems (RTLS) concept is making its way into various parts of agriculture. In sectors outside agriculture, RTLS are already being used successfully to track and locate items through nodes at different levels of accuracy, such as room level or the relative or absolute position. Empirical data can be received in real time from the nodes.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

In agricultural educations you learn to use different economic planning tools, as basis for decision. The purpose and goal of this work has been to find out if economic planning tools are used by the farmers in Sweden. We choose to do an investigation through personal interviews, and used an inquiry to get as equivalent answers as possible from the farmers. This work contains a literature study with relevant facts about the questions that is brought up in the inquiry. This study of literature explains shortly some different calculation methods and bases for decision. It also contains useable information that is important to know before an investment. The questions that are asked to the farmers have focused on the use of calculation methods and economical planning tools.

At Uppsala university scientists have during the last years developed and built wave energy converters. This project is called "Lysekilsprojektet". The development has come so far that they are currently investigating how to gain profit in a mass production. For that reason they want to automate as many steps in the production as possible.The winding of the stator is one part that is being automated using industry robots. The stator is cable wound unlike many other generators.

Det här kandidatarbetet kommer framförallt att beröra filmtekniken, Matte Painting, men vi kommer även röra oss runt omkring ämnet och presentera andra delar från filmproduktionen och framförallt postproduktionen för att lättare kunna sätta Matte Painting i ett relevant sammanhang. Vi jämför Matte Painting med en teaterkuliss, en bakgrund som på nära håll eller ses från fel vinkel kan bryta illusionen av att det är en verklig miljö. Vi undersöker och presenterar hur man kan bygga upp en digitalt skapad Matte Painting som möjliggör att inte behöva åka land och rike runt efter den idealiska filmplatsen, utan kan spela in filmscenen i en studiomiljö. Vi analyserar existerande filmscener som har använt sig av Matte Painting, gör jämförelser mellan olika användningsområden för Matte Painting samt diskuterar fram en slutsats som besvarar vår frågeställning: ?Hur har utvecklingen av filmtekniken, Matte Painting, sett ut och hur kan man tillämpa en digital Matte Paint i postproduktion för att förstärka helhetsupplevelsen av en filmscen?? --- This thesis will primarily concern the film technique, Matte Painting, but we will also roam around the subject and introduce other elements of the film production, and above all post production for ease of putting Matte Painting in a relevant context.

A growing number of companies realise that to achieve their environmental goals and satisfy stakeholder expectations, they need to look beyond their own facilities and to involve their suppliers in environmental initiatives. A life cycle approach means that the production system should be optimised as whole, across national boarders and individual organisations taking part all the way from extraction to disposal. This study is a Life Cycle Inventory of resources used when producing a piece of cotton garment and the method is based on the standardisation series of ISO 14040-43. The area of study, Tamil Nadu the most southern state of India, accounts for more than 90% of India?s knitwear exports to Western Europe.