In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

In this thesis, a transparent model of the human head has been constructed which was filled with a substance that represented the brain. This model was later crash tested. This was done in order to examine how a transparent model of the human head can be constructed to generate accurate data from crash tests. It was also done in order to examine how impacts on the front of the head can deform the rear of the brain. When a head is decelerating, the brain moves forward inside the skull and may hit the front of the skull.

This thesis describes a conceptual design of a support frame for a synchronousgenerator used in a vertical axis wind power plant. In this system the generator isplaced on ground level. The thesis also considers the design of housing for thesupport frame and generator. The concept presented in this report is based on anearlier design. Besides geometric design, simplified simulations has been run in orderto optimize some of the parts included in the construction considering naturalfrequencies and structural strength.The result is presented as CAD-models andan assembly drawing..

Den biologiska mångfalden är viktig inom lantbruket. Jordbrukslandskapets mångfald är vacker för människan att se på och spännande och rogivande att vistas i. Mångfalden innehåller även en genbank som kan bli mycket etydelsefull i framtiden. Dessutom innebär oftast en rik mångfald bland ogräsen även en rik mångfald bland insekter och andra djur, däribland skadeinsekternas predatorer, vilket bidrar till produktiva åkrar. Ogräsens mångfald på åkern beror till stor del på geografiskt läge, klimat och berggrund.

The purpose of this study is to highlight the situation for youths leaving foster care and entering adult life. The study examines the services provided by the social service in the Stockholm area when a youth is leaving foster care, and if a recent change in the legislation has had any impact on the operating procedures of the social service. The study includes interviews with youths who recently left foster care, as well as information collected from social service offices through a survey, supplemented by interviews with practicing social workers. All the assembled data have been analyzed using Ecological Systems theory with focus on the child perspective and the term significant others. The study shows that the respondent youth have trouble identifying the formal ending with social services, as well as the support they received or were offered.

During the nineties, ecological handling of urban storm water became very popular in Sweden. Together with Chalmers University of Technology and two Swedish communities, DHI Water and Environment has been doing research of storm water ponds and constructed wetlands. This thesis work is a part of that research project. The work has been applied at the Bäckaslöv storm water treatment plant in Växjö, Sweden. The plant consists of one storm water pond and a downstream constructed wetland.

Ill health takes different expressions during different periods in life and habits during the early years affect the health during the rest of the lifetime. Bronfenbrenners ecological systems theory has been used as a theoretical starting point in this cross-sectional study. The aim of this study was to identify differences in self-rated health and health-related factors between boys and girls and between the compulsory school and the upper secondary school in Sundbyberg municipality as a basis for the planned activity in the Young Women?s shelter in Sundbyberg, as well as in other municipalities A questionnaire consisting of 24 questions based on different variables has identified disparities in health and health-related factors between boys and girls in Sundbyberg municipality (n=323). This paper found pronounced differences between the sexes in terms of sex and relationships, security, emotional support and psychosomatic complaints.

This thesis investigates the underlying factors behind sexual risk-taking and non-risk-taking behavior with regard to Sexual Reproductive Health (SRH) among adolescents in Lusaka, Zambia. The Qualitative Approach was used for data collection and analysis and using the theory of Social Construction, the author explains how different contexts and aspects in the Zambian Society, that is Traditional, Socio-economic, Political, etc., influence the sexuality or sexual behavior of young people in Zambia. Hermeneutics was used to interpret the meanings in the texts/transcripts acquired through data collection and from the author?s knowledge and understanding of the Zambian historical and cultural contexts within which the participants of the research were constructed. Max Weber?s Ideal Type concept was also used to explain that each young individual?s sexual behavior is uniquely constructed by societal aspects.

Följande rapport bygger på examensarbetet inom CAD-teknikerprogrammet påHögskolan i Halmstad. Arbetet innefattar framtagning av ett höjdjusterbartarmstöd till bilförare, en produkt som inte finns på marknaden idag.Utförandet av arbetet har bl.a. inneburit kriterieuppställning med krav ochönskemål, framtagning av produktförslag i form utav skisser och 3D-modeller, valav material genom undersökningar, även protoyptillverkning och produktanalyser.En del vikt har lagts på att genomföra marknadsundersökningar för att se om detfinns ett intresse för produkten..

Lansen Technology is a security company from Halmstad, Sweden and their focus indeveloping and selling alarm solutions. One of their latest inventions is a vibration sensor thatrecognizes very small movements in the ground.The thesis work was made in cooperation with Lansen Technology AB and the task was toinvent a test equipment that decides whether the sensor is working correctly. By generatingcertain frequencies with specific amplitude, we will expect the sensor to give a similar output.The final report includes all the parts of our work as studying, choosing components,programming, construction, results and conclusion..

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This thesis work is about how technical consulting companies can accept their organization before a coming recession. Technical consulting companies are together with the rest of the actors in the construction business constantly depended on the current economic situation on the market. How to adapt the organisation depends on the current situation on the market.To adapt the organization in the best way possible the companies need to recruit and educate personal. It is then very important to find a solution on how the current change of generation in the companies will be handled. The large and very much competent group of 40-talists will in a few years retire.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Cement manufacture accounts for 3-5 percent of total global carbon emissions. There is a growing interest in reducing the environmental impact and conserve limited natural resources. In cement production, clinker productions consume 87.5 percent of the total energy consumed in the cement manufacture.Cementa has since many years, focused on reducing the environmental impact of cement production. The work has involved the entire production process from selection of alternative fuels to the development of cement with less clinker content. During 2013/2014, two new types of cement (Bascement and CEM II / B) will be introduced to the Swedish market.