The Swedish Transport Administration has, and manages, a database containing information of the status of road condition on all paved and governmental operated Swedish roads. The purpose of the database is to support the Pavement Management System (PMS). The PMS is used to identify sections of roads where there is a need for treatment, how to allocate resources and to get a general picture of the state of the road network condition. All major treatments should be reported which has not always been done.The road condition is measured using a number of indicators on e.g. the roads unevenness.

The exhaust arrangement on a Scania V8 consists of one manifold at each bank connected to a twin entry turbine (8-2-2). A study in GT-Power has shown improved performance and reduced cylinder to cylinder variations using two manifolds at each bank in combination with a single entry turbine (8-4-1). This thesis work analyses the difference in performance shown in simulation and verify it by engine test.The initial work was focused on simulation in GT-Power. Investigating how exhaust manifold volume and pulses effects the turbine efficiency and the mean effective pressure during the gas exchange. To verify GT-Power simulations four engine tests with different exhaust arrangement have been made.The results from GT-Power simulation indicate that a larger exhaust volume improve the turbine efficiency.

This paper is an event study on Initial Public Offering?s return behavior after the dot com bubble. Cumulative Abnormal Returns are used to measure the performance against a market index. The results suggest that the market correctly prices IPOs in the long run thus upholding the Market Efficiency hypothesis. Moreover, value weighted CARs show that large IPOs are more likely to outperform smaller IPOs, however in the long run there is an unpredictable pattern.

Environmental impact and management of energy is a highly topical issue in today's society. Climate impact must be reduced. The Government has set a target to reduce energy consumption in buildings by 20 % by 2020 and 50 % by 2050 compared to the energy use in 1995.With this in mind, we chose to examine how property owners can work on improving energy efficiency in existing apartment buildings. We also wanted to investigate profitability of different increasing energy efficiency measures and the calculation methods and the risk assessment performed by such investments. To tie in with government objectives, we also saw the possibilities of achieving these goals.20 companies were interviewed, of which 14 were property owners and 6 were consulting firms that works with energy efficiency.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This essay will explain the effects of decentralisation, and what impact it has on the efficiency to create a better integration for immigrants on the Swedish labour market. Examples of literature that has been examined are Marcus Gossas and Jon Pierre. From these authors, I have been trying to explain the relationship between decentralisation, cooperation and efficiency.Since the end of the Second World War until the middle of 1980, Sweden mostly received labour immigrant. Since then, the immigrant pattern has changed to consist of mostly refugees. Changed immigration patterns together with increasing debts for the Swedish government has lead to decentralisation and cooperation between public authorities has therefore become a target to reach better efficiency.

The objective of this thesis is to explore opportunities to enhance the phosphorus use efficiencyof inorganic fertilizers in crop production, with techniques available today and in thefuture. Phosphorus is a finite resource of declining quality; therefore a phosphorus use efficiencyin crop production of only 15-30 % is unacceptable. The main reason for low efficiencyis the retention by Ca and Mg in calcareous soils and Fe and Al in non-calcareoussoils. Due to the low mobility of phosphorus, plant uptake is mainly dependent on root growthrather than diffusion. Therefore, measurements need to be taken that benefit contact betweenroot and fertilizer, before fertilizer phosphorus becomes unavailable to the plant.

In this final thesis a study about welfare indicators in the Swedish milk production has been carried out. The system Swedish Animal Welfare Monitoring Scheme developed by the Swedish Dairy Association has been used as a base and the EU project WELFARE QUALITY® has also been used as a source of information. Focus groups have been used as a qualitative investigating method. This included four focus groups, two with farm auditors from the two different dairies and two with dairy farmers. This method was chosen because in this way one can study how a conversation about a given subject takes form in a respectable way.

In todays society IT in general and the Internet in particular are given elements in people´s everyday lives, and smartphones has come to be a big part of those elements. This study focuses on how the use of Smartphones in particular influences the individuals in their working environment, and how this use influence the efficiency and the well-being of said individuals.  To answer our research question regarding how said use comes to effect the efficiency and the well-being for proffesionals in their working environment we have used data from qualitative interviews who is enriched by a short initial diary study. This data has then been analyzed using the Affinity Diagrams Technique, leading to four central themes emerging from the data. The results show that smartphone use at work comes with both positive and negative effects; efficiency increased through the use of smartphones due to the great versatility that comes with the technology, while in terms of well-being issues of stress emerged.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

Energy efficiency is important both to reduce costs and to reduce greenhouse gas in the atmosphere. In Sweden 40 percent of the energy consumption is related to the buildings sector. Hospitals are complex buildings with different activities in the same building, which requires flexible technical systems for ventilation, heating and lightning. A quarter of the total energy consumption in Swedish hospitals is related to user activities in the hospitals. Therefore it is not only important to work with operational optimization but also to change user activities, to reduce energy consumption.The objective of this thesis was to examine the user-related energy efficiency work at two care units, at the central hospital in Sundsvall within Västernorrlands County.

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

Organizational learning has become more and more important in the last decades as the environment in which organizations exist continues to change rapidly and unexpectedly. In order for organizational learning to happen, the individuals within the organization must learn. Just as different individuals possess different skills, each individual also has their own learning style. As the use of teamwork increases, so does the need for techniques to put high performing teams together and with organizational learning as one of the objectives the question is, how do we maximize learning, efficiency and performance in teams? This study uses a quantitative method to examine how teams, from a course at the Stockholm School of Economics, perform on the individual learning, team efficiency and team performance scale based on the individual learning styles within the team.

Syfte: Studien undersöker om det finns ett samband mellan ekonomiska indikatorer och den årliga aktieavkastningen ett år framåt på den svenska marknaden för företag som genomfört nyemission och jämförs med en benchmark som består av företag som inte genomfört nyemission.Metod: Uppsatsen utgår från en kvantitativ undersökning där multipel regressionsanalys används för att undersöka sambandet mellan indikatorer och aktieavkastningen vid nyemissioner under tidsperioden 2002 ? 2010.Slutsats: Utifrån resultaten kunde vissa signifikanta samband konstateras mellan indikatorerna och totalavkastningen för nyemissionsgruppen. Det visade att totalavkastningen sjunker det året företag genomför nyemission jämfört med totalavkastningen året innan nyemissionen. Det kunde konstateras att marknaden är ineffektiv till en viss utsträckning i samband med nyemissioner. För benchmark kunde resultaten dock inte säkerställas på grund av att statistisk felkälla förekom i regressionsmodellen..