As part of an internship at Ericsson, this report was written to enhance the understanding of how it is to develop a system that is well established at the workplace. To improve an already existing system is not always as easy as many developers may think. In this report the pros and cons of developing an already existing system has been researched and analyzed. Do note that the results are only from one development of a specific system and that comparison of other developments has been made from other reports and not from experiencing it firsthand. It was found that the choices made can have an impact on further developing and it is important to write down what has been done.

The Airsoft Community always search for realism and optimal performance.When the performance and/or the realism in your AEG1 aren?t enough you turn to modifications toimprove the weapon. But to manufacture such modifications isn?t that easy, hence you turn tocompanies that are specialized in creating such devices.The goal with this project is to create a prototype of a modification called ?Programmable MOSFET?and targets optimization of the electrical components within the AEG. This means that you digitalizethe control of your AEG thus entails new functions and more stability to the system that isn?t possiblewith its mechanical predecessor.A prototype has been manufactured and programmed with functions according to requirementspecificationsthen it was tested on an airsoft-gearbox with rewarding results.

This study examines the possibilities of interpreting the moral values and ethics presented in the current curriculums in a way that makes them inclusive and constructive. The study also reveals how the liberal democratic ideal, presented in the curriculums as a hyper-ideology, is not at all easy to define or live up to in the pluralistic school of today.By close-reading and criticizing the curriculum for the Swedish senior high school (Gy11)and by looking at it from two different points of views, as rules or norms and as a process, Ishow how the curriculum can be interpreted as a basis or starting point for a communicationabout values. I also discuss wether the aim of this communication should be consensus or anongoing process..

This report describes the development of a system for controlling documents. The report starts with a problem description which the company wants an intranet-based solution for. The report then continues to describe the development phase for the different parts of the system which results in a complete system. The company that wanted this system is called Orbit One and is located in Ronneby, Sweden. They have had a problem with old documents circulating in different versions and in different binders. Now thanks to their new system they can access their documents easy and on demand through their intranet..

In this paper, a small business network with around 30 users is analyzed with respect to security, performance and usability. Based on this analysis, two suggestions on how to solve the problems listed are given. The first suggestion focus on keeping a low budget, while the other tries to deal with the problems more thoroughly. One advantage of the first suggestion is, in addition to not straining the company's budget more than nessecary, it does not involve too great changes in the way the network is used and administered. On the other hand, the smaller budget leads to certain compromises, and there is a risk that similar problems occur again if, for example, the company would grow.

Miljöbron is a non-profit organization; their main purpose is to merge companies and students into different environmental projects. The projects can be an assignment, practical vocational training or degree thesis. Miljöbron is expanding and the demand from students and companies is rapidly growing. Because of the expansion, a large amount of information needs to be stored and managed in a structured database. Also the need of a interface that is structured and easy to use when managing information and Miljöbron?s statistics, for Miljöbron?s staff.

Our project is divided into two parts, one production and written report. The main focus was the production part, were we used PHP to create simple solution for handling SMS and MMS with direct communication with the mobile operator server. We communicate with sockets and can handle CIMD2 and MM7 protocol. To get our components easy to use we have created two classes to handle SMS and MMS. To demonstrate our technical platform we created a website were you can create an account.

Children shoes today is designed with the idea that there feet need a lot of support.Due to this the shoes are stiff all over and children are not recommend to wereshoes when they learn how to walk1. It is also quite difficult to squeeze there feet into these shoes.My project is about minimizing the gap between learning how to walk bare footindoors to take the first steps outside. And while doing that create a collection ofshoes and create a new brand; My First Sneakr.My First Sneakrs is inspired by retro sneakers, hiphop- and street culture. Theshoes are colored with attitude and the models are unisex. The outsoles are soft tomimic the bare foot feeling.The shoe has an opening feature in the back, making it easy to put on.

During the past few years a vast amount of research has been done to increase the understanding of the complex ecosystem of the Baltic Sea. Modelling and simulations are important tools to increase knowledge of the system. A suitable model must be simple to use and the parameters and variables needed in the model must be easy to access.In this paper a dynamical mass-balance model, CoastMab, which is validated for smaller coastal areas, has been used to predict concentrations and transports of phosphorus in three large coastal areas - the Gulf of Finland, the Gulf of Gdansk and the Gulf of Riga. CoastMab uses ordinary differential equations to regulate inflow, outflow and internal flows. To reflect seasonal variations in temperature and different types of flows the model has a temporal resolution of a month.

This report is about Adobe Acrobat 3D and their new PDF format witch can contain 3 dimensional models that are interactive. The purpose is to find out if the program and the format work in a level that is suitable for the market. To create this PDF you need Acrobat 3D installed on your computer but it only needs Acrobat Reader 7 or 8 to open it, and the Reader is free to download on the internet.The examination is focusing on four formats: U3D, 3DS, DWG and DXF because they are the most common in the building industry seen from the architects? way. From a 3D model exported to these four formats they where converted to PDF in different settings to be compared in different points as information and size of the files.

Today, Ericsson Microwave Systems (EMW) uses non-graphical user interfaces in some of their Ada95 applications. EMW wishes to develope a more easy-to-use and platform independent graphical user interface (GUI) for their applications. To meet these requirements EMW has chosen to evaluate Java in GUI development with Ada95. To make it possible for the Java GUI to communicate with the Ada95 application, some kind of standardized interface is required. CORBA is a specification of such an interface.

Databases are an easy way of storing information kept together and accessible and can save time by finding the information easier. Cochleaimplant could be seen as a form of advanced hearing aid, this product consists of two parts, an external part that recieves sound and sends signals to the internal part through electromagnetism. The internal part is the implant itself and is surgically placed in to the cochlea. Örebro University hospital has just started working within the field of Cochleaimplants and are therefore in need of a database to store patient related information.The database problem was solved using Microsoft Access 2003 combined with the built-in support for Visual Basic, which is a sort of programming language. The result of the thesis work was a fully functioning database according to the given specification and is now being used at Örebro University hospital..

As a teacher in baking and patisserie courses there can be difficulties in following the curriculum for Patisserie 1. If this leads to an education that is not the same for all the schools in the country, it creates a problem that has to be solved. The results of this investigation show that teachers generally do not follow the curriculum but instead chooses their own solutions. Some conclusions that have come forth are that the National Agency for Education needs to make the curriculum clearer and give tangible examples of products, that can either be classified as easy or complicated, in the field of baking and pastry courses. I have chosen the standardized interview method.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.