This master thesis is an analysis of how the amount of health centers per inhabitant has changed since the Swedish government implemented a new health care reform in 2010. The reform implies a free choice of health centers in the Swedish regions and opens up the market for private firms. The purpose of the thesis is to study the effects of the different financing systems toward the health centers in the regions. The models are based on theories of the need of health care. Two of the independent variables which are studied are income and age.

Abstract.The levels of dioxin and comparable substances rose to a large extent in our environment during the second half of the 20'Th century. This was the result of the synthesis of, and careless usage of these substances in cooling fluids, hydraulics, pesticides etc. Background levels of dioxins and furans in sealed samples prior to this era suggest that former sources of these substances existed. Salt glazing is a method of adding a smooth acid resistant exterior to stoneware ceramics. The technique has been in use since the 16'Th century, maybe even earlier than that.

Eutrophication of the Baltic Sea and Swedish lakes remains a major problem despite many years of effort to reduce the emissions of nutrients. One major source is waste water systems, especially private sewage systems. These sewages accounts for a very large share of nutrients per capita in comparison with citizens connected to larger sewage treatment plants. Norrtälje community has the greatest number of private sewage systems in Sweden. Discharges of nutrients, especially phosphorus, to the Baltic Sea from these sewage systems are significant.

Drain water heat recovery is an uncommon measure in multi-unit residential buildings. There istechnology available for the purpose but the knowing and experience of the heat recovery systems islittle. The purpose of this thesis is to evaluate the future potential of drain water heat recovery inmulti-unit residential buildings.A major part of the multi-unit residential buildings in Sweden were built during modernismen andrekordåren (1940?1975). Many of the buildings have worn out drain and water supply systems andmany are in need of a general refurbishment.

Abstract.The levels of dioxin and comparable substances rose to a large extent in our environment during the second half of the 20'Th century. This was the result of the synthesis of, and careless usage of these substances in cooling fluids, hydraulics, pesticides etc. Background levels of dioxins and furans in sealed samples prior to this era suggest that former sources of these substances existed. Salt glazing is a method of adding a smooth acid resistant exterior to stoneware ceramics. The technique has been in use since the 16'Th century, maybe even earlier than that.

Wastewater treatment is increasingly controlled by the Swedish environmental quality objectives, adopted by the Swedish parliament. There is a need for a sewage system that can fulfill stringent requirements concerning the environment, recycling and resource use and hygiene. Additional environmental aspects in recent years are the impact of climate change, new knowledge about the effects of pharmaceuticals in water, the need for improved wastewater treatment and increased recycling of nutrients to agriculture. This report has, from a future scenario of the year 2050, analyzed seven different systems for wastewater treatment and treatment of compostable biowaste from households in Eskilstuna. A future scenario was chosen based on that within a forty year period new challenges may arise which can result in higher demands on sewage treatment than those we see today. Another reason why the future scenario was established is that changes in wastewater treatment systems are slow to establish. The analysis is mainly focused on the economical aspects but environmental aspects such as emissions to receiving waters and potential recycling of plant nutrients has also been evaluated briefly.

Background. Anesthetic-related death in small animal anesthesia is about ten times more common than in human anesthesia. Recent research identifies the early postoperative period as particularly risky and highlights the need for regular and careful monitoring of the veterinary patient during this period. Objective. The aims of this study were to investigate whether there are standard procedures in terms of regulated routine patient observations and record-keeping during the early postoperative period at Swedish veterinary clinics, and if there are any guidelines for monitoring the veterinary patient during recovery. Methods. A small survey including ten Swedish veterinary clinics was carried out as well as a literature review. Results.

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.

ERP system is the information technology that has had the biggest impact in companies? development and way of working in today?s world. ERP system is divided in several applications with a modular software design that allow people in every department in a company to store and retrieve information accurately and in real-time. This master thesis investigates attitudes toward ERP systems among business organisations and ERP suppliers with the overall purpose of analysing to which extent a new ERP system will bring change in the business process. The purpose of this thesis is to make a survey of attitudes toward ERP systems among business organisations and ERP suppliers.

As an amateur it can be difficult filming from several angles at the same time as this requires several cameras. It´s also hard to film at occasions when it´s not appropriate to manoeuvre the camera manually. Systems for solving these problems already exist, but it´s either more expensive, professionalsystems or cheaper systems with limited functionality.The purpose of this project is to develop a cost efficient solution to the problem above that offers a better functionality then existing commercial systems. The biggest difference from existing products is the wireless video feedback from the camera to the remote unit.The result of the project is a system consisting of two units, a manoeuvre unit with a cradle for the video camera and a remote unit from which the operator can control pan and tilt of the video camera.Communication between the two units is wireless.On the remote unit there is a joystick and a display mounted. In addition to this, there is also an IR receiver that is capable of reading the signal from the cameras own remote and sending it to the manoeuvre unit.The manoeuvre unit is equipped with one motor to control the tilt function and one motor to control the pan.

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier.

Scania Top Team is a competition where the best mechanics in the world are competing against each other. In 2011, the world final was recorded and this material is now used to see which problem solving strategies these top of the line teams are using to solve the realistic problems assembled in front of them. To help them, the mechanics are allowed to use two of Scanias IT-systems: Scania Multi and Scania Diagnose and Programmer 3. This report consists of two parts. The first part is the development of a method to analyze the recorded material.

The main aim of my research essay is to examine two congregations, one in Sweden and one in Democratic Republic of Congo, how theology and the life in the church shape the cultural context. The analysis uses semi-structured interviews of two pastors responsible for organizing the Easter celebration in their churches. The interviews serve the purpose to reveal how they apply theology in their context, how they interpret the Easter celebration liturgically in relation to the early church and how they perceive the cultural development in the congregations Easter celebration 2010-11. To give complementary insights to the interviews I use computer-aided interviews with members of the congregations. The methodological approach is based on a study of contextual theological theories, Easter traditions in the early church, Easter theologies and then applying these theories in the interviews.

The employment structure consists of different sectors, whose share of the total employment rate is all part of an economic structural conversion according to this thesis applied theoretical approach. A structural conversion, which consist of recurring crises, such as the financial crises in the early 1990s. This crisis and its effect on the Swedish economy is well-documented, while the shortage regarding the effect on a smaller scale, in a local and regional context, provides this thesis purpose. More specifically, a comparison between the two neighbouring towns of Malm? and Lund, will constitute the local contexts in this research.

This thesis studies the concept of balance in the management control systems (MCS) of a small Swedish company within the IT-sector. The aim is to evaluate the importance of balance and dynamics in MCS and investigate which factors affect them. The frameworks used are Simons (1994) four levers of control, and the five-factor model for balance and dynamics by Mundy (2010). The small IT company - the object of the case study - has grown extensively in the last years and needs to develop more formal MCS without losing efficiency and creativity in their fast-moving industry. The case study reveals that balancing MCS is important also in smaller companies with less formal MCS.