Denna explorativa studie beskriver hur den interna kontrollen i organisationer kan påverkas under implementeringen av ett ERP system. Intern kontroll är en del av organisationens ekonomistyrning och består av organisationens rutiner och aktiviteter för att undvika risker och säkerställa att organisationens mål uppfylls. Eftersom implementeringen av ett ERP system är en riskfylld process är det viktigt att förstå hur den interna kontrollen påverkas. För att undersöka detta används i studien ramverket Internal Control - Integrated framework. Datainsamlig genomfördes på en stor IT-organisation där ERP systemet Navision 2009 implementeras och 10 respondenter från olika avdelningar intervjuades.

AbstractThis essay discusses different explanations and interpretations of what characterizes large areas containing clearance cairns (cairn fields). Results from the analyses show that there are different explanations about when and why cairn fields and clearance cairns occur. Explanations vary from introduction of the wooden ard in the early Bronze Age to the introduction of rational hay-making in the Roman Iron Age.  There is, anyway, relative agreement considering why and when cairn fields were abandoned. The reason suggested is an increasing pasturage with the consequence of reducing soil to poverty during the period of the Great Migration or in the Viking Age.The most likely cultivation system in cairn fields is a system consisting of both intensive and extensive characteristics. The latter coincides with the probable mobility of settlements.

Sekretessbelagd.

Det pågår en transformering av svenska stridskrafter till följd av en förändradomvärldsbild och en teknisk utveckling. Obemannade farkoster studeras och bedömskunna tillföra värdefulla förmågor.Syftet med uppsatsen är att undersöka nyttan med små UAV-system för bataljonsnivånvid en internationell militär operation. De fyra utvalda basfunktionerna ledning,underrättelser, verkan och skydd utgör analysfaktorer.Uppsatsens resultat omfattar en kontextuell del och en teknisk del. Den omfattar även envärdering av små UAV-system i ett typfall, strid i bebyggelse. Uppsatsen visar att detfinns ett flertal uppgifter inom basfunktionerna, som små UAV-system kan lösa medvarierad förmåga.

AbstractThis essay examines the idea of unity in the early church, based on Psalm 133:1. My interest in this was awakened during a seminar with the scholar Sr. Dr. Michaela Puzicha OSB, who proposed that St. Benedict of Nursia in his Rule, RB 42, alludes to Ps.

Gamification är en strategi som använder spelmekanismer och spelkomponenter för att skapa motivation och engagemang hos användare av olika typer av system. Denna studie syftar till att undersöka om gamification kan användas för att motivera användare av system för tillverkningsindustrin.Studien har genomförts med en initial litteraturstudie och kvalitativa intervjuer med experter inom gamification samt utveckling av system för tillverkningsindustrin. Intervjufrågor har därefter ställts mot tidigare genomförd forskning, för att identifiera möjliga resultat.Resultatet av denna studie visar att spelmekanismer och spelkomponenter skulle kunna användas i ett system för tillverkningsindustrin, förutsatt att det finns ett tydligt affärsmål, mätbar och användbar data samt identifierade drivkrafter hos organisationens maskinoperatörer. Vidare har ett antal punkter identifierats som kan vara motiverande för en användare av system för tillverkningsindustrin:Möjlighet för operatörerna att följa utvecklingen i sitt expertområdeKartläggning av operatörernas drivkrafter, vilken därefter används för att förbättra operatörernas arbetssituation, med exempelvis mer givande uppgifterBelöningar som utdelas är matchade mot operatörernas preferenser, med syfte att vara mer effektiva som motivationsskapare.

Society and technology develop together in interaction processes. Because of the development of information technology, the Industrial society has been left behind in favor of a society where information is the key production factor, i.e. the Information society. In the Information society, social functions and processes are organized in networks. These networks integrate geographically separate markets to parts of a complex global economic system.

This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

A system for sampling of alcohol and aldehyde from diluted exhaust gases from vehicles powered by ethanol has been developed and tested. The major part of the work has been research of earlier work in the field and the construction of the sampling system.The part of the system constructed for the measurement of alcohol has been shown to work, however, more test should be performed. The part of the system constructed for the measurement of aldehyde was tested parallel to a commercially available system, based on the same principle of measurement, and has been shown to work well.Determination of the concentration of gaseous ethanol using a FID has shown the since earlier known fact that a FID is not able to measure a correct concentration of ethanol. Furthermore it has been shown that high concentrations of gaseous ethanol can not be kept in a bag more than a few minutes without a substantial decrease of the measured concentration..

A cars powertrain consists of everything that is needed for its propulsion. The components in the driveline that transfer the power from the engine to the driven wheels are not absolutely stiff, hence they will wind up due to the torque and act as torsion springs. If you suddenly demand a bigger torque by stepping on the accelerator pedal, a so called tip in manoeuvre, and that torque is acquired from the engine as quickly as possible, the driveline will not be able to transfer that fast torque change due to its weakness and as a result it will start to oscillate. These oscillations will be transferred to the driven wheels and make the car to accelerate jerkily which will be experienced as uncomfortable by the passengers. Furthermore, there is a backlash in the driveline that will make the weakness in the driveline even more excited than it should have been if the backlash did not existed.To avoid too big problems with these oscillations there is a control system that controls the demanded torque.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

As companies grow, their need for computing power will increase, which traditionally resulted in companies having to invest in more IT resources. Now, with cloud computing, companies can easily hire computer power over the Internet, on-demand. Cloud computing offers a highly scalable environment where companies can store data and host their services. This paper employs a qualitative study with interviews and literature studies to explore opportunities and challenges associated with cloud computing from a system developer perspective. The aim of the paper is to find out how cloud computing changes the conditions for system development. The paper contributes with four different opportunities and challenges that the system developer must handle to succeed in the world of cloud computing.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

In this study I examine the debates, intentions and ideas concerning the physical and created schoolroom as they appeared in the journal Lärarnas Tidning - Svensk Skoltidning (Teachers Journal ? Swedish School journal) during the period 1962-1974. The built and created school building and its environment has been a relatively neglected topic in Swedish pedagogical research.When the Swedish comprehensive system transformed during the sixties, with new curricula and a common nine year school, many school professionals realised the need for a new and pedagogically adjusted schoolhouse.The early seventies marked a decline after a ten year period with an extensive building program affecting large parts of Sweden, and where schoolhouses had been an important part. The debate concerning the new Swedish school building was sometimes inspired and refreshing, but resistance and bitterness was also expressed. In part, this should be seen against the backdrop of the introduction of a new educational system, using new and sometimes untested pedagogical ideas, together with the fast transformation of the Swedish society.The research method is an exploratory textual analysis focused on five different issues: ideas concerning community centres and integration, participatory and democratic issues about the built environment, the school building as a pedagogical tool, aesthetic considerations, and the working environment.

The thesis describes a completely new biofuel system to generate particle-free heat from combustion of ash-containing biofuel particles at high temperatures.The suggested system gives opportunities to introduce biofuels in new areas.Main components in the suggested system is a heat radiating combustion chamber intended for pulverized wood, combined with regenerators to extract heat from flue gases and simultaneously preheating the combustion air.The thesis contains a description of the suggested system, theoretical considerations, calculations regarding the combustion, and includes results from tests performed.The results from calculations and tests performed concludes that the system is workable and possible to apply..