SammanfattningEn ånganna monterades i EGR (Exhaust Gas Recirculation) slingan på en 12,7 liters Scania Euro V motor (DC1306). En modell som beskriver Rankine cykel togs fram med vatten som köldmedium i simuleringsverktyget GT-Power. Ångpannan i GT-power modellen kalibrerades m.h.a experimentell data.Simuleringarna visade att det optimala ångtrycket, det trycket där högst effekt kan erhållas från expandern, är beroende av EGR temperaturen. Det innebär att ju högre EGR inloppstemperatur desto högre optimalt ångtryck. EGR temperaturen i punkt 2 i ESC cykeln är 514? C för denna motor, vilket resulterar i ett optimalt tryck på 120 bar enligt simuleringen.

Studies show that the interest and knowledge about science among teenagers is decreasing. They also reveal the difficulties to explain the ecological processes and that the ideas about the nature are collected from everyday life and early school years.The intention of this investigation was to find out more about children?s ideas and knowledge about the ecological processes and to compare these results with the curriculum.The method was a questionnaire and interviews with children in school year 1 ? 6. The aim of the studies was also to find out if any progress connected to age could be found, concerning understanding of the ecological processes.The results showed difficulties in achieving the predestined goals for biology and chemistry concerning ecology cycles and they differed a lot between the children. Often the learning process showed very little progress.

The aim of this study is to investigate a number of class teachers' thoughts on the use of information and communications technology (ICT) in early literacy learning. The study has been conducted as a qualitative study, interviewing five teachers with the help of an interview guide. Three central questions were posed.What perception do the teachers have about the use of ICT in their tuition?What perception do the teachers have about the pupils' literacy learning in teaching with ICT tools?What perception do the teachets have about teaching and learning by means of ICT when it comes to pupils with reading and writing difficulties/dyslexia?The overall theoretical basis of the study is Vygotskij's sociocultural theory.In conclusion, the result of the study is as follows.Most class teachers feel that the training they have undergone in ICT education was adequate, but they also call for skill development.Most teachers believe that the use of ICT tools provide opportunities to adapt their teaching to pupils' knowledge level. The teachers' opinion is that ICT in teaching is useful for pupils' progress in early literacy learning.Most teachers also believe that ICT tools in teaching can be of some help for pupils with reading and writing difficulties/dyslexia.One obstacle in helping these pupils is lack of time.Therefore, the majority of the teachers hand these pupils over to special education outside the classroom..

My essay begins with a story in which I portray different communicative situations at the preschool unit Myran. The children in my story are at an early stage of development and they all suffer from multiple disabilities which inhibit their ways of communicating. Through my story, I describe how I perceive different communication dilemmas in my work place. A difficulty I cover in my essay is how the educator knows if he or she has interpreted a child correctly when it does not have a verbal communication and therefore is completely dependent on the educators? interpretations of its communication efforts.

Castration of dogs holds many reasons and opinions, therefore methods, traditions and rea-sons vary. The approaches have during time changed from mostly surgical castrations to also including hormonal treatments. Castration is used to control the dog's reproductive abilities, for medical reasons and to possibly rectify problems of behavioral nature. How common a particular method of castration is in a country is highly dependent on the country's traditions. In Sweden it is most common with castration for medical reasons, such as possible elimina-tion of diseases, for example, benign colorectal tumors.

This study is a part of a Swedish research and development project that is about heat-treated wood and is led by the Swedish University of Agricultural Sciences and Luleå University of Technology. Products that are heat-treated already exists on the market, foremost the Finnish brand ThermoWood®, bur the project group want to find out if it would be possible to start a Swedish production with somewhat different applications than what is common today. The heat-treated wood has many attributes that have changed in the heating process. It becomes more biologically durable, it gains stability in form and dimensions and it becomes darker and looses several unwanted extractives such as resin. Disadvantages that can be mentioned are that the wood becomes fragile and the strength properties changes. My main purpose with this study is to look into customer involvement in the early phase of product development. I also want to find out if the customers I interview think that the product is worth working with, which means start a Swedish production.

Safety in the construction industry has become a question of top priority in recent years. Despite a massive investment of time, money and knowledge, the occur-rence of fatal accidents in Sweden alone is around one a month.The purpose of this study is therefore to improve the safety on the construction site. By an examination of the role of the safety agents and their cooperation with the construction workers and supervisors as well as examine how safety agents can improve safety on the construction site, which is the goal of the study.Four questions were formulated based on the purpose and the goal of the study.The methods used to answer the questions were a questionnaire survey, multiple interviews, a literature review and a document analysis.The report describes the safety agent?s role as a complex one with many different tasks. The role of the safety agents is regulated in the health and safety law, but it can sometimes be difficult to interpret and the agents can therefore interpret their role differently.

In a globalized world, competitiveness is based on the high IP (intellectual property) of our export products and innovations are therefore important for new companies to establish and develop. It´s not enough to just have big international companies but it is also necessary to invest in new companies that can be competitive in the future. By helping entrepreneurs with innovation support in the early stages, new technology-based businesses are established and developed. The purpose of this paper was to examine how innovation support in the early stages affects the establishment and development of new technology-based companies. Furthermore, we investigated how this will affect Sweden's international competitiveness.

Saab Aerosystems have had one dominating product, JAS 39 Gripen, and one dominating customer, FMV, for a long time. The operations management system at Aerosystems is adjusted for development of Gripen and as the business unit is trying to enter new markets with other products and customer the operations needs to be adjusted to fit the development and manufacturing of these products as well.The purpose of the master thesis has been to investigate how Aerosystems is managing requirements on operations from external customers and how to make improvements within this area. The aim has been to carry out a situation analysis to identify where improvements are possible and then produce proposals for improvements through studies of literature and other business units. The thesis also include a study of knowledge transfer within the business unit to investigate how this can be applied to improve the managing of requirement on the operations.An extensive interview study has been carried out in which interviews mainly have been conducted with employees at Aerosystems, but also at Saab Avitronics and Saab Aerostructures. The reason why these business units have been examined is because they have carried out a large number of successful businesses with external customers, which also are potential customers for Aerosystems in the future.The interviews have been analysed to identify strengths, weaknesses, opportunities and threats with the present way of working.

Goods that children come in contact with on a daily basis for example toys, electronics, textiles, household items, have attracted an increased attention in recent years because of a common occurrence of residues of potentially hazardous chemical substances. Some municipalities in Stockholm have developed plans for managing chemical risks and work systematically to phase out products containing hazardous substances. This thesis aims to contribute to an improved knowledge base for any future work with non-toxic nursery schools in Haninge. The study's focus is on the challenges encountered by conditions and problems of preschool personnel to manage chemical risks in early childhood environments. Primary data was collected through a qualitative approach based on semi-structured interviews with both the preschool staff and practitioners working in the central organization of the municipality.

Chapter 6 of the Ch?ndogya Upani?ad has often been treated in works on early Indian philosophy, as well as in some comparative studies on color symbolism. Attempts to place it in a larger framework against the background of late Vedic religion are, however, few, the rationalistic and ?tradition-challenging? appearance of the text having repeatedly been emphasized. But the doctrine contained in the text ? a cosmologic teaching on the three elements constituting the universe, each being characterized by a color (red, white, black) ? and their microcosmic counterparts in the human body, does have some clear affinities to the worldview of the Br?hma?as and ?ra?yakas, which posits a series of similar correlations (bandhu-) between macro- and microcosmos.

Chapter 6 of the Ch?ndogya Upani?ad has often been treated in works on early Indian philosophy, as well as in some comparative studies on color symbolism. Attempts to place it in a larger framework against the background of late Vedic religion are, however, few, the rationalistic and ?tradition-challenging? appearance of the text having repeatedly been emphasized. But the doctrine contained in the text ? a cosmologic teaching on the three elements constituting the universe, each being characterized by a color (red, white, black) ? and their microcosmic counterparts in the human body, does have some clear affinities to the worldview of the Br?hma?as and ?ra?yakas, which posits a series of similar correlations (bandhu-) between macro- and microcosmos.

The electric car has existed for over a century and producers has tried to commercialize it earlier but has not succeeded. In recent years, however, a change occurred that may be significant for the electric car and it is now to commercialize in the market of passenger cars. The technology has in recent years elaborated as more car manufacturers have started to invest in development in the subject field. This thesis aims to compile an action plan for the development of charging infrastructure for electric vehicles in Uppsalahem ABs residential areas. It is based on a survey of different residential areas and a survey of charging infrastructure.

This thesis is based upon the work done at Westinghouse electric company (WEC)inVästerås during the spring semester of 2015 and describes the development of a quickcoupler with associated blade changing tool. These are meant to be used togetherwith a sawing tool that the company uses for the dismantling of nuclear reactors,which is performed under water.The aim of the thesis was to develop a complete manufacturing documentation withdrawings and related CAD models which Westinghouse later can use to manufacturethe tool and the quick coupler. It was also included in the assignment to, if necessary,modify parts of the saw tool to adapt these to the intended blade changing tool.A number of visits to the company's workshop was made during the time to study thesaw that the thesis is based upon. The purpose of these visits was to get a better ideaof the dimensions, construction and the field of use of the saw. On three of thoseoccasions various engineers and consultants accompanied us to discuss possibleproblems with different ideas.This was interspersed with information in the form of literature studies on quickcouplers to create a clearer picture of the nature of the task.When enough information had been gathered a functional analysis was made to dividethe main problem into subthis phase the idea and concept generating process took place.The methods used for this was mainly brain writing and brainstorming.

After emergencies involving chemical spills it is of great importance that correct measures are taken with short notice, both for the security of people and in order to minimize future environmental consequences. The RIB-unit at the Swedish Rescue Services Agency initiated this study, the aim of which is to propose changes to the existing chemical transport calculation tool: Chemical Spill 3.4, included in RIB - Integrated Decision Support for Civil Protection, so that it can be used for decision support as well as in preventive work. A rough estimation of chemical transport in the subsurface is considered being of great importance when making decisions during emergency response operations.The proposition presented in this report is a non site specific chemical transport model which is designed to give a rough estimation of NAPL flow in homogenous isotropic soil shortly after an instantaneous release. The model can be used at two levels; both in situations without access to information on subsurface properties, and with more accuracy in situations with knowledge of the included parameters. For that reason the user can choose among predefined alternatives or assign the parameters a numeric value to increase the quality of the model output.