To reconstruct a building is a long-term investment for farmers and it is important that people with different qualifications are involved at an early stage for making the system adapted to the animals as well the animal keeper. Therefore, ethologists who can contribute with their expertise are needed to design the system and get it to function well for the animals.A Swedish farmer who planned to rebuild her stall for tied dairy cattle to a loose-housing system for recruitment heifers for milk production asked me as an ethologist to find a system which can be fit to her existing tie-stall barn for 30 dairy cows, considering the animal needs in terms of movement, social interactions and play behaviors, and to theoretically compare the system with other systems with respect to the behaviors mentioned.The theoretical comparison between different systems was made through a scientific literature review.In agreement with the animal keeper I set out to fit a system with feeding cubicles, a system with cubicles and a system with deep straw bedding to the barn. After measurements were taken and preliminary drawings were outlined it was found that only the feeding cubicle system was possible to fit to the barn.The space provided will limit the animals to perform some playing behaviors. To decrease aggressive interactions between animals even thought a limiting area it is possible to provide partitions between resources animals compete around to prevent that more than one animal can get success to the resource at a particular place at one time. To increase the animal movement in the system the water trays were moved to the outer wall instead of kept in contact with the stalls.Although this report provides guidelines for rebuilding, other competences regarding building construction and a pre-test of the suggested building solution according to Swedish legislation are needed before the rebuilding can start.The results are directed mainly to the owner of the barn, but the literature review can be used by other cattle farmers and might bring increased understanding of the possible effects of different building solution on the animals..

The Swedish early childhood system is considered among the best in the world, however, in spite of this, we feel that there exists a conflict between educators? and parents? expectations of ?a good preschool?. During our teacher education training we have observed many different preschools and almost in all of them we have listened to anecdotes about one or more conflicts arising between educators and parents and which we have been able to pinpoint toward differing expectations. After talking with a preschool director, who also perceives that expectations of the preschool aims sometimes differ, our idea brought us to conduct this investigation.In this study, we have investigated parents? expectations of preschool and compared them with educators? expectations.

This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.

This essay will examine the historical picture of the island Rapa Nui as it is portrayed in popular science and in ecohistorical literature of the university of Gothenburg. This historical picture states that the inhabitants of the island cut down a lot of trees in the process of transporting the big and heavy statues, moai, from the quarry to the platforms along the coastline of the island. During this process all trees disappeared and resulted in soil erosion. The cultivation was destroyed and brought hunger to Rapa Nui. The following rivalry for food led to a situation of war followed by a cultural collapse.

Persson, K., Rooth, P., Sundblad, S. och Uthas, K. (20008). Laborera mera ? Kan ett laborativt arbetssätt i de tidiga skolåren förebygga matematiksvårigheter? (Explore more ? Can difficulties in mathematics be prevented with laboratory work in the early school years?) Högskolan, Kristianstad.

Many companies are currently working to optimize and streamline their processes and production lines to achieve higher profitability. In increasingly competitive markets, companies are working to find solutions to increase the value of their production with such a small use of resources as possible. A tool used to accomplish this is the Lean management system. Lean comes from the production system that Toyota has been developing since the early 1900's, The Toyota Production System (TPS). The Lean philosophy helps companies, by working towards continuous improvement in its operations, to achieve higher customer satisfaction, more efficient production and ultimately higher profitability. Many companies are working to implement Lean in their organization. But there are many who fail to implement a complete change towards Lean.

My essay is about the latter period of Anne Charlotte Leffler?s authorship. In Part I of my essay, I describe her path from the 1880s, where she described femininity as a shortcoming, as writes Ingeborg Nordin-Hennel, towards the 1890s and towards describing femininity as a possibility. This development took place on two levels ? on an outer level, where all the woman writers in the late 1880s were influenced and where they were pushed out by the male writers, and on an inner level with Leffler herself.Her late literary works depict new and more independent types of women, and eroticism is given a more prominent position.

There has been a lot of debate in media about mathematics teaching in grade school in Sweden. Many students experience that mathematics in grade school is abstract, which leads to decreased interest of mathematics in early years. An international study indicates that Swedish students in class 4 do not fulfill the mean for mathematics according to EU/OECD countries. The study also shows that Sweden practice a textbook driven education, compared to other countries. The aim for this study was to find out how a few pedagogues for class F-6 teach mathematics, and why they have chosen to educate the way they do.

This project investigates the cooperation between architect and engineer. The context of the investigation is the design of buildings for a sustainable society. The goal of the project is to further the development of the sustainable built society by increasing the knowledge of the interdisciplinary cooperation between these two fields. The focus is a close cooperation already from the start of a project. By involving both fields in the early design stages it is thought that the knowledge and skills of each field is better utilized.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The Swedish Red Polled breed is threatened by extinction and there are only around 1100 animals left. The breed was popular in the early twentieth century, but since then the numbers have steadily decreased. The overall objective of this study was to find out whether there may be economic incentives for preserving the breed. The milk quality properties are of major importance in the production of dairy products. Therefore we would like to establish if the Swedish Red Polled breed carries favourable alleles at loci of relevance for milk quality, to potentially make the breed more interesting for milk production.

For many years, the construction industry in Sweden has not developed much of an integral approach for design across disciplines. The sector?s impact on society, economics and environment is huge. To make the interactions within the construction industry more efficient, a relatively new concept called BIM (Building Information Modeling) has been introduced. The idea with BIM is that the different actors of the construction industry will work through intelligent CAD software, with common file formats and more cooperation between different actors during the various steps of the building and construction process.The technical consultancy company WSP Sweden is working actively to implement BIM within the frame of its activities.

During the last year in the Innovation Engineering Program, at Halmstad University, a degree project was performed that was carried out during Fall semester in 2006 and Spring semester 2007. The project was performed by two students in corporation with LIC Audio AB, a company in Stockholm. The degree project was meant to result in a communication aid for people with a cognitive handicap. The project focused on people suffering from dementia because of the expressed need within this group. This aid should first and foremost help in a conversation between a person with dementia and another person, like a relative or nursing home staff.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.

ITT Flygt is a world leading company that mainly manufactures submersible pumps. A problem of ITT Flygt is that product development projects rarely manage to hold the estimated project time. It shows that something unexpected occurs in projects quite often, which results in delays. The delays can both be due to an optimistic time plan of projects and risks in product development projects which are not discovered at an early stage. This added with unforeseen delays makes it difficult for ITT Flygt to estimate the duration of their projects.The goal with the Master thesis is to examine a suitable method for simulation of project time.