This Master degree project has been performed at the Braviken paper mill on papermachine 53 (PM53) which produces newsprint paper. The current economic situationhas contributed to declining demand for newsprint, which means it is extra important tobe competitive by high energy efficiency. Particularly as energy prices are expected torise when the economic growth returns.One way to increase energy efficiency is by reducing the water use in paper and pulpmills and consequently save energy through reduced heating of water. The thesis's maintask is to evaluate whether a water purification plant (microflotation plant) forpurification of process water in PM 53 is profitable. The microflotation plant enablesreuse of warm process water instead of losing the energy to receiving waters.

Lake lowering in sulphide-rich areas is currently a major environmental impact for surface water. This study focuses on whether there is a relationship between a gradient of lake lowering and surface water impacts in areas of sulphide-rich sediments, in order to better understand their contribution of heavy metals and sulfuric acid. Also, is it a reasonable method to use the reduced lake area in order to quantify the gradient? The survey was conducted by collecting water samples from reference lakes and lowered lakes from south to north in coastal areas within the county of Västerbotten. Water samples were then analyzed for TOC, pH, conductivity, anions, base cations, alkalinity, acidity, sulfate, Al, Cd, Fe, Mn, Cu, Zn and Pb.

ICA vill utveckla sitt miljöarbete i vattenfrågor. Denna rapport syftar till att öka medvetenheten hos ICA om verksamhetens miljöpåverkan genom att analysera vattenfotavtrycket ? vanligen kallat Water Footprint ? för ett livsmedel. Vattenfotavtryck är ett verktyg inom miljösystemanalys som används för att kartlägga sambandet mellan produktion och konsumtion av produkter och vattenanvändning. Studien visade att vattenfotavtrycken är ungefär 14 500 liter/kg och 16 500 liter/kg för svensk respektive irländsk nötfärs.

Amongst the published literature researching wet cleaning of paper there is a limited amount of studies conducted researching the method simmering water treatment. There are even less studies conducted on how simmering water affects the paper being treated when used as a cleaning method. Despite the limited research, there are literary reviews describing the method and suggesting it as an alternative for conservation of paper with iron-gall ink. The following study will therefore be examining, the somewhat unusual method, simmering water treatment, and comparing it to one of the more common wet cleaning methods: immersion washing. This is done to compare how the different temperatures of the water affect the paper. The types of paper used in this study consists of three dyed and four undyed papers. All of the papers are new, apart from one sample originating from 1847.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

In this thesis we have developed a framework of features associated with eCommerce platforms and then defined them. Thanks to our interviews with eCommerce-developers, we have been able to define multiple eCommerce features with the focus on an owner?s perspective. Much of the previous research in the area, takes a user perspective when the functionality of eCommerce-platforms have been assessed and evaluated. We have therefore taken an owner?s perspective in the evaluation of eCommerce platforms and therefore produced a suggested framework with key features associated with the owner's functions.

The environment that surrounds us affects us all. Research has shown that we feel physically and emotionally best in natural environments with greenery or water elements. Urban environments are likely to be more stressing then natural environments. How we experience specific elements, as water, of an environment is not as much investigated. There is a need of further knowledge for us to fully understand the interplay between our senses and the environment. Human beings have always been depending on water and the search for it has characterized our deeds and doings through out evolution.

In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Eutrophication is a major problem in the Baltic Sea, as a result of increased loading of nitrogen and phosphorus. In the coastal parts of Östergötland the soil largely consists of clay and contains high levels of phosphorus bound to clay particles. Erosion of the soil in agricultural areas makes the water turbid and transports phosphorus to the Baltic Sea. The aim of this project was to examine the relationship between phosphorus and turbidity in the coastal streams of Östergötland. The aim was also to evaluate the possibility to use turbidity as a surrogate measure for phosphorus.

The basic ingredient of paper is the individual wood fibers. The property of the fibers depends on a variety of factors e.g., method of pulp production and processing. The final sheet quality depends in part on how the fibers interface between each other and therefore factors that affect the fiber size are of interest.The flexibility of the fibers depends in part on the pore water i.e., the fiber swelling. The sheet becomes less flexible at low water content which gives a loss in strength. Thus it becomes desirable to increase the water uptake.The experimental investigation described in this report consists of exposing the wood fibers to different ions and ionic strength and then measure the pore size by thermoporosimetry where a DSC (Differential Scanning Calorimeter) is used.

The purpose of this study is to examine how Viking Line, Tallink Silja and Birka Cruises work with economic and environmental sustainability, and also to see how they work with new environmental legislations. In 2015 a new environmental legislation will be introduced, by the name Sulphur directive. The Sulphur directive entails a reduction in Sulphur dioxide emissions from ships where the emissions cannot exceed 0,1 percent. There are three alternatives to achieve the new environmental legislation, the use of Marine Gas Oil, LNG or scrubbers. All three alternatives will lead to increasing costs for the shipping industry.

The securities market was to undergo a major change with the entry of MiFID I in November 2007. EU´s establishment if the directive sets high standards for investment firms to establish internal guidelines in accordance with MiFID I. As right now, the securities market is facing further change with the proposal for MiFID II.MiFID II seeks to overcome MiFID I´s shown deficiencies. The greatest need for change are the rules that secure investor protection, with specific focus on regulation on information service from investment firms to customers. This essay deals with the rules on information service enacted in MiFID I compared to the changes presented in MiFID II to investigate whether the changes could strengthen investor protection as desired.MiFID II is a more detailed framework than its precursor.

The construction of buildings and paved surfaces changes the natural water balance.Precipitation generates surface runoff and storm water instead of infiltrating into the soil.Storm water has come to be considered as a major source of pollution in lakes and streams inthe vicinity of urban areas. Reduction of pollutants in storm water is a key action in order toprotect sensitive recipients and maintain high water quality. Storm water is traditionallytransported by storm sewers to the nearest recipient. In recent years the approach to stormwater management has changed; storm water should primarily be disposed of on site, throughlocal disposal of storm water, LOD. LOD is created by a combination of the function ofseveral smaller local facilities and the general sewer system.

A well, situated on Listerlandet in the western part of Blekinge in Sweden, has a very high content of nitrate. Water with a too high content of nitrate is hazardous to human health, in particular to small children. The area surrounding the well is mostly drained agricultural land with some larger farms for chicken and mink. The well takes its water from the bedrock and is deeper than most other wells affected by nitrate. The bedrock in the area is dominated by limestone with a relatively high flow of water.This thesis was performed in order to find the source of the nitrate.

Benthic diatoms are used in Sweden for monitoring water quality in run-ning water; the method is also frequently used in other countries in Europe. One of the problems of the diatom method is the need for sedimentation of the fresh sample, to be able to decant the over standing water and add alco-hol as a preservations solution. To my knowledge, no results have been published about how long the settling time must be to ensure that the ben-thic diatoms really have settled down to avoid a loss of the diatoms when decanting the over standing water. The aim of my investigation was to improve the Swedish method where the benthic diatoms are used for water quality monitoring. I wanted to find out the appropriate time necessary to wait until all diatoms have settled down before decanting the over standing water. First, fresh benthic diatom samples were taken in the river Fyrisån and the lake Mälaren on different days. After arriving in the laboratory, I waited three different times (30 min, 60 and 180 min) for the diatoms to settle.