This study is predominantly qualitative. It is also descriptive to a large extent and notoriented towards hypothesis-testing. The study aims at studying what has influenceddigitization of old Swedish dramatical works through the Dramawebben projekt, whilefocusing on the technical solutions. Four different data collection methods have been applied.Interviews and a questionaire with open-ended questions were the two primary tools. Adocument analysis and observations were applied as well.Examples from earlier research to relate to questions about digitization as an institutional andsocietal practice are presented.

This project is about color and light and how it affects the atmosphere in the city. I choseto look closer into the central parts of the city, a place where I often feel a lack of lightand color, especially during the winter season. In the beginning of the project I made ananalysis of how intense colors are used in the city and how we can use color as a tool tocreate effectful spaces. Further into the project I chose to look closer into the effects thatare made by the facades, how the light from the windows affects the room outside when the dark falls. At the end of the project I caught a feeling inspired by the city and applied it into an installation of light..

This master thesis project will describe and evaluate the interfaces between applications and Controller Area Network, CAN, interface boards from different manufacturers. The interfaces have corresponding functions but the usage of parameters is different. The simply communication of sending and receiving messages is more alike than the supplementary functions between the different interfaces. The CAN communication is more controlled by the CAN protocol and is therefore more alike. The evaluation shows differences and similarities between different interfaces and also difficulties and options to translate them.

This thesis is written at WSP management and investigates the practice of pre-project planning and feasibility studies at Swedish construction companies, through the study of the ongoing feasibility study of the mall Sturegallerian in Stockholm, and through interviews with experienced project managers in the construction industry. There is currently a big span in the way Swedish construction companies plan the pre-project phase and the aim of this thesis is to present a more generic and standardized way that helps minimize project risks and maximize efficiency and profit. The result is a generic model which can be used in pre-project planning. The model describes the phases in the preproject planning process and the activities that span these phases. Is also describes the categories of professions that need to participate in the preproject planning group and which activities that each profession executes. The other result is a list of factors that need to be considered for a well performed pre-project phase, as found during the interviews. Among others the thesis stresses the importance of involving the client as a key participant in the process.

In order for companies to be competitive they perform different types of development projects.  Due to globalization a greater focus is added on costs, not least on costs in development projects. Project controllers are involved in development projects in order to review the financial aspects. The authors have examined the role that project controllers hold in respect of two Swedish manufacturers, Volvo CE and Scania CV. The investigation has revolved around three main issues where the authors conducted interviews with controllers that do not work in development projects and project controllers in development projects. The goal of the interviews was to gain a greater understanding of the role of project controllers, how this role will differ from those that do not work in development projects and the difficulties faced by project controllers.

This master's thesis deals with the public library project called the GÖK-project, whichconcerned three Swedish public libraries: Linnestaden (Göteborg), Örnskoldsvik and Kalmar.The general outlines for the project were: reconsideration of the conception of the literaryquality, improvement of the library services, adjustment to the library user and reconsiderationof the conception of adult education to the public libraries of the 90s. The projectcaused a big national debate with effort put on the conception of the literary quality.The topic of this master's thesis is partly the GÖK-project and its general outlines, partly theaccomplishment of the project, the main point put on the public library in Linnestaden(Göteborg)..

Projects of all kinds generate documentation that needs to be organized and stored for future use. Well adapted tools, together with a unified modus operandi need to be available for both the project members and those having a more organizing role if an organization is to be effective.A study of the tools available to project members at Svenska Kraftnät have been performed along with an analysis of the guidelines for the tools' usage. The study has focused on the needs of the project members, not the organization as a whole, thus providing a bottom-up approach to the problem instead of the more organizational top-down approach. Interviews of around 20 project members, whose roles include project leaders, technical experts and documentation supervisors, have been conducted to get an idea of the practical problems that exists.All systems, except for a local network storage device, were found to at least meet Svenska Kraftnät's current demands. The usage guidelines, however, covers only the general process that a project should follow and lacks detailed information on a per system level in several areas.

This thesis suggest an explanation for is how it is possible to understand that the large arena project in Växjö grew to cost sums of money that initially in the project not would have been an alternative to discuss, how goals changed and how the institutional environment changed the prerequisites of the project. As empirical part of the research, to describe and analyze the project, the municipality?s documentation of the project have been analyzed and semi-structured interviews have been made. Theoretical perspective is taken from the neo-institutionalism in sociology of organizations and change, and theories of the complexity of large projects with major symbolic value and importance. The project starts with the municipality?s investment and cost to be hold back, defined as a necessary condition in order to fulfil an ambitious drive towards new sport arenas.  Eventually the necessary condition was abandoned and the arenas were built with the municipality responsible for the investment, cost and risk in the project.

Together with Hälsoteknikalliansen the project team recognized the need to improve availability in the staircase environments. This is a difficult environment, especially for our elderly. The staircase leading to and from apartments is such a major obstacle that many people do not dare to go into the staircase leading to their front door. The market study that the project team conducted showed that many were in need of a living support, often a relative, who helped and supported them when they went into these stairs. It also appeared that these people manage everyday life just fine, but they suffer the problems that stairs to and from their apartment causes.

This thesis project is a vision of an identity building in Gothenburg, situated on the pier called Bananpiren. The purpose of the project is to create interest and stimulate discussions around the place and the building.In order to gain inspiration of what such a place can contain and express, a number of similar projects have been analysed, for example the Sydney Opera and the Yokohama International Port Terminal.A number of suggestions was then created and analysed, all of which are presented in chronological order in order to show the rejections and the developed designs that resulted in the final formation to proceed with.The result was finalised in a number of presentation images of the project that can be used by Cullbergs Arkitektkontor AB when presenting the project..

In the EU there are EC Directives that Member States of EU should follow. Sweden has undertaken to transpose EC Directives regarding the working environment to Swedish Provisions.  In 4 April 2006, the European Commission had some criticism against the Swedish implementation of the Construction Sites Directive. The Swedish Work Environment Authority has in response to this criticism reworked the Work Environment Act and related provision about building and civil engineering work. The changes came into force 1 January 2009.These changes have resulted in some working methods and even new responsibility subjects must be reviewed. The purpose of this exam project was to investigate if contractors and clients in the construction sector, had have time to update themselves on this front and adapt to these changes.

In recent years seemingly everything has become digital. Some areas, like classical sports, have been slower to adapt to new technical development. Golf is an example of this. Usually when people play golf they bring their clubs, golf balls and a paper scorecard on to the golf course. The advantages of keeping score in a digital way areevident.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

This study has been performed at a smaller high school and with its industry students, the high school is located in a small industrial community. The purpose of my study has been to find out what students think about their work with the project work, what they think has been positive and negative, how their motivation is influenced by the work on the project and if the work has been affected by factors outside the school world.The interviews have been carried out like normal conversation with open questions. The students who participated in the study comes from the school where I did my internship. The selection was done by asking all students from a specific course, those who were positive to participate are also the ones I have chosen to interview. My main study results, in summary, described as the students, once they were inside their work were positive to the project work and felt motivated in their work. Negative experiences, for the students which attend a practical program, has mainly been economic, as the school does not provide any financial support.