This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

The terrorist attack that shocked the world the 11th of September 2001, when two hijacked aircrafts flew into the World Trade Center's twin towers in New York, came to change the world view for many people especially Americans that felt that the world around them where about to collapse. A new time had begun, a more frighten one. A new kind of terrorism where seen in the dawn, a kind that never had been more evil, and there for was passed to be extremely dangerous. The United States followed by the United Kingdom decided quickly to declare war against the terrorism. Unavoidable this decision led to the development of new interpretations of public international law when the US where unwilling to follow the rule of law.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

Title:   Controlling Mälarenergi by Balanced Scorecard Seminar date:  2009-01-16 Institution:   School of Sustainable Development of Society and Technology Course:   Bachelor thesis 15hp Authors:   Camilla Nilsson, Amanda Agestav Advisor:   Ulla Pettersson The main issues:                What does Mälarenergi's Balanced Scorecard look like? Which Balanced Scorecard perspectives are important to Mälarenergi? Is Balanced Scorecard a purposeful control model in order for the group management to fulfil the aims of the owners' directives? Purpose:                            The purpose is to find out how the group management at Mälarenergi works with Balanced Scorecard. Is Balanced Scorecard a purposeful tool for the group management to fulfill the aims of the owners' directives? Method:                             This study is based on a qualitative research method in the form of interviews. We have interviewed one respondent.

In today?s tough business environment the need for good and efficient leaders are becoming more and more important. The businesses are in constant change, the world is more unpredictable and the competences of the employees are much greater today, which also calls for a new type of leader, a leader who not only is authoritarian, but also possesses soft skills. In this environment where there is this greater focus on leaders, leadership developments have emerged and increased in number over the last ten to twenty years. They try to develop leaders in all domains of their life, both professional and personal and the model we work with in this paper is Total Leadership, this model implies that you try to accomplish being a better leader throughout your whole life as a leader, to be whole, genuine and innovative, no matter career or position in life.

This master?s thesis focus on Dewey Decimal Classification during the period 1932 to 2011, where the classification of the psychological knowledge domain is analyzed and discussed. In the light of the recent swedish switch from the swedish classification system SAB to DDC, this research area deserves prominence. The aim of this study is to investigate how DDC represents the historical development of the psychology subject with its underlying epistemology, to identify and analyze values and prejudice, and to analyze problems with DDC?s classification of psychology in relation to three other classification systems.

The Library of Uppsala University has decided to change their classification system from the Swedish SAB system to the American Dewey Decimal Classification. One of the main reasons for this decison was that Kungliga biblioteket also has made an exchange between these systems. Due to that, the national bibliography of Sweden classifies Swedish documents according to Dewey Decimal Classification and the SAB system is no longer maintained. A transition to Dewey Decimal Classification will enable Swedish librarians to import foreign catalouge posts and classification codes and will provide them with a common standard between their libraries and other libraries due to the use of the same international classification system. It is disputed whether the Dewey Decimal Classification is equally suitable for all subjects.

This diploma work project is a product development project which purpose is to redesign a braking system for a walking frame. The system that was developed diverges the force from the user to braking power, and includes a service brake as well as a parking brake. The most important components of the system are a grip handle on where the user holds on to and a braking handle on which the user operates the brake from. The system also includes a power transmission component, braking package and other mechanical components. All of the components wasn?t developed in this project, several off them has been reused from the existing system.This product has been developed to meet the requirements and standards presented from the principal, Ahlberg Leber.

The aim of this thesis is to study discursive change in the Swedish environmental political discourse between 1987-2005. The text of three Swedish budget propositions are analysed for this purpose.The results from the analysis are related to a few relevant theoretical perspectives that hold partly different views on what constitutes ?sustainable development? and ?ecological modernization?. Through these theories the thesis continues the discussion around the two central but somewhat blurry terms sustainable development and ecological modernization. The aim of this discussion is to conclude whether the discursive change in Swedish environmental politics can be said to go more in the direction of sustainable development or ecological modernization, or if elements of both perspectives can be found.The analysis shows that the Swedish environmental discourse has come to include more and more political fields such as general welfare politics, during the period.

The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

The school is under constant change and school reform on the conveyor belt. In 2009 the Swedish government introduced new directives for the elementaryschool, including multi-national sample, written testimonials from grade one and grade with several grades rose from grade six. The purpose of this study is to examine currently active primary teacher perceptions of the pupils' learning and development might be affected by those earlier and clearer knowledge assessments, and how teachers perceive this reform on the basis of the Swedish school's motto "a school for all". The study was carried out with a phenomenological approach where the method has been depth interviews with five active primary teachers from grades one to six in a school. The results show that teachers perceive that the earlier and clearer assessments will affect students differently according to student performance and knowledge.

This study aim to investigate the conditions framing the professional development situation for physical education teachers (PE) in a small municipality in the south of Sweden. The Swedish National Agency for Education declare that "focus must be directed towards strengthening the teachers' profession", and that "schools need well-trained teachers and good teaching to help students achieve good results". The study focuses both the schools? contribution and the way in which the teachers take own initiative and are motivated to develop their professional skills. The investigation is all based on teachers' perspectives.

The purpose of this study is to investigate the method called zero recognition that is used in accounting for construction contracts when the outcome is uncertain. When this is the case it is hard to make the necessary estimates needed for the percentage of completion method to be used. Both the meaning of the method from an accounting perspective and the practical importance and purpose of the method is investigated. The method used for this study is the qualitative one and the deductive model is used to relate the theory with the empirical research. The theoretical background consists of accounting theory and theories about individuals, companies and markets.

The Swedish government have a goal that wind turbines shall produce 30 TWh by the year 2020, compared to about 3,5 TWh produced in Sweden during 2010. To minimize the disturbance that wind turbines create the Swedish Environmental Protection Agency has stated a guideline value that noise from wind turbines at nearby residents shouldn?t exceed 40 dBA, at 8 m/s wind speed. With advanced calculation models, like Nord 2000, the emitted sound from future wind turbines can be calculated at an early stage to optimize the power production without exceeding the 40 dBA. When the turbines have been built there is a need to verify that they really are within the guideline.

This article is about Abrahams Children foundation and its teaching method called IE- method. It?s about how a teacher can use the IE- method in the religion lesson. There were some questions in this article that had to be answered and the questions are:- How is the form of the religion classes when a teacher uses the IE- method?- What happens in the class when you study the interaction and the communication?- Does the student?s participation increase when they work with the IE- method?- What are the advantage and the disadvantage with the IE- method?- Can the teacher use the IE- method in other classes?To get to the ?correct? answer I used many methods like, observation in the class, qualitative interview with the teacher (Lisa Andersson) and with four students (Kim, Erik, Amanda, Patrik) and I also used questionnaire.