The development of the radio medium ? a case study of Sveriges radio is a scientific report of the case study that was made in the spring of 2014 on Sveriges Radio Västerbotten. The report investigates and analyzes how radio has been developed.The purpose of this study is to analyze the production flows of the radio and explore how it has been developed. The project?s objective is to raise the knowledge in media development, primarily radio?s development.The scientific theory is based on the concept of media convergence, in this chapter the reader will learn what media convergence means, but also how it works in the media world and the Public Service.

The energy sector of modern time is currently faced with several challenges. These are both production oriented and environmental oriented in nature. The energy of the future is intended to support an increasing demand while at the same time reduce its environmental affection. This stresses a development towards production methods of renewable energy. Among the existing methods, biogas is presented as an attractive alternative.

This essay will try to explain and compare the different development steps which Croatia and Bosnia-Herzegovina have taken after the war. How could countries with such similar backgrounds develop in such different ways? By analyzing and comparing the two countries the purpose was to examine how these countries which had so much in common could develop in so different ways. My two questions are: What similarities and differences are there between the development which Bosnia and Croatia have taken after the war? Why have Croatia succeeded and not Bosnia?My analysis showed that the main reason to the difference between these countries was that Bosnia is divided; all ethnic groups in Bosnia only consider what's best for their own ethnic group and not what's best for the country. Croatia however has expelled the Serbs which made it easier for them to have a succesfull democratic development. .

ABSTRACT. Introduction: Human Immunodeficiency Virus (HIV) is a retrovirus which occurs worldwide and spreads between humans mainly through sex, from mother to child, blood and blood products and between injecting drug users. After been infected with HIV for a couple of years the final stage of the infection progress into Acquired Immune Deficiency Syndrome (AIDS), and there is no cure or vaccine, only medication that delays the development of the disease. Objective: The aim of this thesis is to examine the preventive work against HIV in Sweden, the groups at risk for getting infected and to highlight sexual attitudes and behaviours among adolescents and young adults. Method: A literature based study method was used and the material is based on scientific articles and reports from active actors within the field of HIV prevention.

This report is a documentation of the workflow and the result of a project carried out by twostudents from the Royal Institute of Technology in collaboration with a company. The report isstructured in a chronological order and describes the methods and systems developed in theworkflow. The report shows how the project evolved from a study phase to the various proposals onthe concept solutions.The project aims to develop a systematic way of bonding two different kind of cardboard under fiveminutes. By conducting a general study about glue and its different forms it was possible to obtain abroad knowledge, which helped to choose the right substances to later use in testing on the differentcardboard materials in question. Glues's survey resulted in a list of different substances that wererelevant to the project.

Metso Paper offers a front-running range of solutions and services for the pulp and paper industry. At the baling unit, design solutions are developed for manufacturing and handling of pulp bales. The machines are continuously developed to satisfy customer needs. One big step in the development of the baling line was to remove hydraulics from the machines and replace it with electrical motors and pneumatics. This was not done on the folding machine which is still driven by mainly hydraulics.

The aim of this essay is to examine three separate Swedish public libraries and their respective websites on the grounds of the usability sciences. I firstly had to summarize the main properties of the usability-field in order to gain an extended knowledge of its purposes and possible usage for today?s library systems. I was then able to apply the extended knowledge in the examination of the three library websites and the purpose of determining whether or not they were designed according to the standards set by the usability-sciences.Usability is a rather new science that deals with the dissection and examination of computer-based systems, in order to find the key components that make systems user-friendlier. With user needs being the main focus of its research, usability tries to meet all the different needs of the modern user and construct systems that are less system-centered and more user-centered.

This thesis has been performed at the system development company Verendus System AB, together with the home care company Basic Care Unit (BCU).The thesis has consisted of developing a web based informationsystem for BCU in which they can administrate their business. At the time of writing this thesis, BCU was using a windows-application to administrate their activities, which was both costly aswell as resulting in an unnecessary burden. The aim the thesis has thus been to create a platform-independent information system that simplifies and streamlines BCUs work by being user-friendly aswell as imposing some simplifying features.The students has been developing the system by the help of a work method they themselves developed. The method consisted of working in several iterations that each had several milestones. The method resulted in the students knowing easily when each iteration was finished or not.The thesis resulted in a working platform independent prototype.

Wastewater handling of private sewage systems has become an all increasing matter. In Stockholm region the 90 000 private sewage systems contribute with larger phosphorus flows to the Baltic Sea than the two biggest sewage plants in the area, Henriksdal and Käppala, contribute together, even though these two plants purify wastewater from more than one million inhabitants. When summer house areas turn into areas for permanent living ? transition areas ? the load on the existing systems increases, systems that already often are unsatisfying. In those areas it is not clear what the best system choice is; On-site systems for single households; Local collective systems or Connection to central systems.

Detta examensarbete är den avslutande delen av utbildningen inom maskinteknik på Linnéuniversitetet i Växjö under våren 2013. Arbetet utfördes i samarbete med Rottne Industri AB där skogsmaskiner utvecklas och tillverkas för skogsbruk. Projektet innefattar utveckling av en hjulupphängningskomponent kallad ?hjularm? tillhörande företagets ledande produkt, skördaren H-8. Resultatet slutade i en ny design av hjularmen med hjälp av CAD-modellering, Systems Engineering och FEM-analysering..

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

High technology companies in Sweden spend a huge amount of money on research and product development in proportion to what they get back in earnings from their inventions. Product development has traditionally been regarded as much more important than business development. This thesis aims to point out the critical factors behind successful business development processes for high technology companies. We have chosen to make a case study of Hexagon, a highly successful and innovative company within the measurement technology business. Internal and external actors that are important for business development have been identified and interviewed in order to understand how ideas are developed and executed.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

AbstractMy purpose with this study was to learn more about different ways to teach children how to read and to investigate how teachers can use more fiction when they teach.During the years that I have been working in school, I have only met teachers who use a method that is built on sounds. The children learns to read from books where the words is not put in their right purpose; for example; we can se a sun, a dear looks down in a lake.After my teacher-education in literature I became more and more interested in if it could be possible to use more fiction when you teach children how to read. I also wondered if it was possible to find readers where the sentences are put in a meaningful story.I heard of a method called Whole Language, or the kiwi-method and I decided to find out more about that method. I decided to make a comparison between the ?sound-method? and the Whole Language-method.I have been using qualitative interviews with both children and teachers with experience from these different ways of teaching.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.