Wind power is expanding rapidly in Sweden. Increasing amounts of wind power sets higher requirements on balancing power and grid expansions and would affect the whole Swedish electricity system. The aim of this report is to examine the factors affecting the wind power expansion in Sweden. How many wind power plants projects will obtain building permissions and what costs and revenues can be expected? How much balancing power will be required and does a changing geographical distribution of the wind power plants reduce the need of balancing power?A survey of the county board?s official applications has been made and out of all the applications, corresponding to 80 TWh produced per year, about half of the applications are expected to obtain a permit with a major portion of them located in the north of Sweden.Especially older wind power plants, deriving revenue from Nord pool, find themselves today in a complicated financial situation.

 Abstract  Interest in Lean grows and spreads to the public from industrial and service sectors. Lean is currently used in administrative processes and it is called Administration but can administration be Lean? The aim of our study is to develop a useful model for a successful implementation of Lean Administration by using various scientific articles, books and information from the case study.The part of the purpose is to: ? Identify critical success factors that arise? Identify the challenges arising from the implementation of Lean Administration.We have studied a Division within Distribution at GE Healthcare in Uppsala. The model that we have developed provides challenges and success factors for a successful implementation.In order to succeed in implementation, a culture that promotes continuous improvement must exist in the organization. A key success factor is to understand Lean Administrations structure and principles.

This essay deals with the issue how to define the concept successful school and what ingredients it includes. To aim this task I have interviewed four principals at upper secondary schools, two placed in community schools and the other two working for non-community schools. We have discussed how the principals define a successful school, whether they believe that the principal has a major part in contributing to the schools success or not and further if they think that schools have anything in common with private companies.The principals all agreed on what components they believe a successful school consists of, that is good school results from the pupils, a high comfort level for the pupils at school, professional management from the principal and a high level of young people who wants to attend the particular school.Further I have studied Swedish and foreign research in the area of successful schools and management in schools to get at good background in this matter..

According to FSC (Forest Stewardship Council) shall at least a mean of 10 trees per hectare including riparian zones and other areas with high biological values be left in final felling. In addition large clear areas should not be created and all retained trees with high environmental value shall be spared. To leave trees in final felling means a lower cutting volume and hence a lower income from the cutting, but it also means that the production in the next generation becomes less because of competition. The aim of this study was to evaluate the effect retained trees have on the production in the new generation of forest, and to investigate if there is any way to lower this effect. The environmental care has also been estimated by the amount left in final felling.

The purpose of this literature study was to investigate the possibilities to improve longevity and stayability of beef cattle with breeding. The breeding goal for beef breeds is to produce animals with high capacity for growth and good feed efficiency. Longevity and sustainability are two important features to include in the breeding goal. If longevity is increased each cow can produce more calves and the number of female calves used for recruitment can be reduced and only the best heifers need to be selected for breeding. The benefits of longer life is that it lowers the costs of recruitment animals, it increases the number of young animals that become available for slaughter, and it increases the proportion of high producing animals in the herds.

This master?s degree project concerns the combination of a multi dwelling passive house with solar energy for the generation of electricity and domestic hot water (DHW). Different alternatives with either solar thermal systems or photovoltaic (PV) systems are compared with two reference alternatives producing DHW from electricity or district heating. The economical comparison uses a life cycle cost (LCC) perspective based on the present value of expenditures for investment, energy and annual operating and maintenance.The energy yields from the solar energy systems were calculated by hand and with simulation software. Calculation and dimensioning of PV systems were carried out with a software called PVSYST.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

AbstractA beautiful death ? Manliness in four Japanese samurai moviesThis thesis deals with the samurai and his portrayal in Japanese historic movies and what kind of messages he conveys in form of masculinity to theater audiences. Four movies were chosen, two from the 1960s and two from the 2010s. The reasoning behind this was to look at two eras of samurai movies and if possible try to see differences between them. The history of the samurai, being a man and woman in modern Japan, R.W Connell and famous Japanese authors from different time eras acted as tools to try to answer the questions in hand.

Large amounts of phosphorus (P) are lost from the arable land due to water erosion. Both phosphorus attached to particles and dissolved phosphorus (mainly phosphate) are transported away with drainage-water and surface runoff. Good soil structure is important in minimizing these losses. In this study, soils from 50 fields were analysed with respect to aggregate stability as measured by dispersion of clay together with the content of total phosphorus (TotP), particulate phosphorus (PP) and phosphate phosphorus (PO4P) in the water phase. All soils were clay soils with clay content varying between 21 and 54%.

Penalty clauses is a term that can be put in an agreement and is an amount that shall be paid by a part of the agreement if they cause any damage to the other part by breaking the agreement. Penalty clauses have since around 100 years ago had a quite clear meaning in Sweden according to a lot of authors. These authors have the opinion that penalty clauses is an exclusive judgment of the compensation the victim has right to, that means that if the parties have put a lower amount in the clause the victim won?t get full coverage for the damages caused by the other party. That the penalty clause is an exclusive judgment of the victims right to compensation means that the victim doesn?t have the right to request other compensation above the compensation in the clause if nothing else is stated in the clause.A penalty clause may be viewed as a complement to compensation you get according to The Tort Liability Act (1972:206) where it is often difficult to obtain full compensation for damages when it is required that a number of conditions are to be met for damages deleted.

The intention of this essay is to describe the problems with loss of books at three Swedish University libraries. It?s based on interviews with librarians. The library codes of ethics, the library law and the terms of reference of the libraries are central for my understanding. Interview results: Little was being done to stop theft.

The purpose of this study is to examine what motivates people to help others at risk to themselves. The focus is on international aid workers, which in their work put themselves in situations of risk. Earlier research shows that international aid work involves risks such as infectious diseases, violence, death threats, assaults, constant insecurity and risk to be traumatized etc. There is not much research done on what motivates to help others in spite of risks, hence we find this an interesting area. We have interviewed six respondents about the content and character of their motivation and factors that are important for the maintenance and development of this motivation.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.