Syftet med denna studie är att studera verksamma pedagogers uppfattning om utomhuspedagogik samt om de märker någon skillnad på barngrupper om de använder sig av utomhuspedagogik i sin verksamhet. Studien har genomförts med hjälp av elektronisk enkätundersökning. Verktyget som användes var google Drive.Undersökningen visar att pedagogerna använder sig av utomhuspedagogik i sin verksamhet och pedagogernas uppfattning stämmer ganska bra överens med utomhuspedagogikens teori..

The report describes the process of identifying the interference that exists in a newly installed automated robotic cell and suggest improvements to increase productivity. The cell is used for lifting up extruded aluminum sections onto a conveyor which deliver the material to a anodising line at a company that manufactures aluminum extrusions.To find the areas with the best possibility for improvements in the cell we used a variety of job measurements e.g. measure of standard times for each operation in the cell. The core of the report is a study of the robots.One reason for this study is that the robots do not reach the productivity they were purchased to. The main cause not reaching the productivity is the visionsystem.

Material handling is a term that includes all kinds of handling of material from a raw product to a finished one. ABB is active in the following segments; foundry, packaging and palletizing, metal industry and plastics industry.The demands for efficiency and reliability have been set very high in the industrial sector. Optimizing of the material handling will give the company higher cost-effectiveness. Around the robot there are different kinds of material flows, to optimize the cycle time, consisting of carriages combined in different ways.Motion Control is a complex system with main functions such as; positioning, synchronizing, indexing and more. The products in the system need to cooperate to make these functions possible therefore integration of motor- and servo products are important.

The task of constructing a transmission has been provided to us by Digital Engineering, which is a company located in Hovmantorp. After meeting with Digital Engineering we started immediately with the brainstorming to find different ideas with pen and paper. After having presented a number of concepts for the company, we had finally chosen a winner. For the gearbox to be able to work in a good way the tension must never exceed the strain limit of the material. A prototype of the gearbox was produced by TKB Modell.

En ökad kostnadseffektivitet i svenska företag är viktigt för att dessa ska kunna bibehålla sin internationella konkurrenskraft. Då el- och andra energipriser förutsägs stiga i framtiden ökar även företagens energikostnader. Genom energieffektivisering kan företag minska sina kostnader utan att förlora konkurrenskraft.Detta arbete har utförts på GETRAG All Wheel Drive AB i Köping och syftar till att kartlägga företagets energianvändning och därigenom lokalisera potentiella möjligheter till energieffektivisering av företagets olika processer. Kartläggningen har haft särskilt fokus på elenergianvändningen då denna står för den största kostnaden bland energislagen. Hänsyn har endast tagits till möjliga besparingar och ingen investeringskostnad för effektiviseringsåtgärderna har beräknats.Kartläggningen har genomförts genom mätningar av elanvändningen på produktionsnivå i kronhjulstillverkningen samt insamling av övergripande mätdata över elanvändningen för övriga stöd- och produktionsprocesser.

Detta examensarbete har utförts på uppdrag av Ayen Technology AB i Haparanda som är ett litet företag inom satellitkommunikationssektorn. Syftet bakom projektet var att utveckla en takmonterad, motoriserad antenn för satellitkommunikations vanligen kallad ?Drive-away? eller SNG i branschen. Detta skulle bli en helt ny produkt för Ayen Technology. Man skulle utgå från en existerande reflektor utvecklad till en annan produkt utvecklad av företaget.

This report is regarding an electrical installation of an alarm system on a post fishingboat called Andromeda. The background of the installation was an earlier andinadequate alarm system that led to a motor failure. The ship was taken out of serviceand was sold to Björn Magndahl who rebuilt it to a yacht.The project was conducted partly by developing the existing systems, partly bydocumenting the work by means of electrical blue prints. Except the alarm systems, aninstallation of the frequency control unit for the bow thruster was installed.The installation was working fine and the outcome of the documentation was handedover in a form of a binder during the test Drive of the systems and the assignment wasapproved..

The construction market has, as a result of the crisis in Europe been uncertain in recent years. During the year 2013, the construction will be stabilized, in particular Finland. The geographical proximity between Sweden and Finland and similarities in cultures and climates makes Finland a coveted market for many Swedish companies.Differences in national regulations and guidelines, which are produced by the authorities in different countries, are examples of barriers that may hamper the process, including for Swedish villa suppliers, to establish themselves on the Finnish market. It may be useful when facing a new export Drive, to look up what similarities and differences there are between the countries building codes, to prevent mistakes and unnecessary costs to the project work..

The purpose of the rebuild of Notnäs AB timber sorting line is to renew the existing Drive and turning ends of the transport chain, which has become old. This means that Notnäs AB have problems to get new parts if the gearbox and chain are worn out. They also require that the rebuild should have a maintenance schedule for the new spare parts that will be used in the rebuild. Maintenance workers placed great emphasis on that in a rebuild it shall be a service-friendly design. The maintenance schedule used in Notnäs AB in the current situation is from Statoil and the report uses SKF formulas and recommendations in order to obtain a lubricating schedule.

The aim of this study was to evaluate whether gallop training, rather than regular Drive training, is worthwhile for trotters race performance. Another aim of the study was to expand the author?s riding- and driving capacity, and get more practical experience on the impact of interval training on trotters. The sample population in the study was two trotters, one Standardbred, and one cold-blood. Given the small sample population, the results of the study is only indicative on the effects of gallop training on trotters, and not conclusive.

The aim of this study was to evaluate whether gallop training, rather than regular Drive training, is worthwhile for trotters race performance. Another aim of the study was to expand the author?s riding- and driving capacity, and get more practical experience on the impact of interval training on trotters. The sample population in the study was two trotters, one Standardbred, and one cold-blood. Given the small sample population, the results of the study is only indicative on the effects of gallop training on trotters, and not conclusive.

Syftet med studien är att undersöka om molntjänster som OneDrive och Google Drive är tillräckligt enkla för oerfarna datoranvändare att börja använda sig av säkerhetskopiering. Med fokus på om användare med begränsade kunskaper inom IT och datorer kan använda molntjänsterna endast med hjälp av de instruktioner som ges på hemsidan och under installationen av molntjänsterna. Slutsatsen blir att alternativen är nära att uppfylla frågeställningen. Det upptäckta problemet med att skilja mellan molnet och synkmappen kräver dock ytterligare studie för att kunna bekräfta problemet och avgöra om problemet finns på båda testade molntjänsterna innan ett definitivt svar på frågeställningen kan ges. Problemet uppstår eftersom molntjänsterna brister med att förklara internetgränssnittet och därför i förlängningen hur återställning går till. .

This report is the result of a project work carried out at Karlstad University in conjunctionwith the local consulting firm Camatec where most of the work has been performed.The work can be classified as a classic engineering work with supportive theories andcalculations which in this context is relevant.The engineering project has focused on developing new standards for a conveyor that is usedin the Värmland paper industry where large rolls of paper are produced. A conveyor can takeits appearance in many different forms but in this thesis it has been an exemplary look and ithas also become modulatable with a central section, a Drive end and a turning end.The construction work has been build under CAD programs such as Pro Engineer, drawingshave been created and costings have been analyzed. Strength calculations have been made andcooperation from several different companies have erected to explore different solutions andideas for a modern and sustainable conveyor..

This report describes the scientific work of designing and manufacturing an intelligent controller module prototype for automobile trailer connections. The functions of the module are both to Drive the lamps and detect failures. The module also contains functions to handle other functions of the trailer. To learn about controller modules the group does extensive feasibility study.The group receives three already existing modules, the functions of the three modules are studied and tested in the lab, this is done too get a overview of the construction. The method used I called reversed engineering, a way of constructing by analyzing constructions already done.When the modules are analyzed, the functions of the prototype are tested and designed without copying the analyzed modules.

The purpose of this literature review was to find common factors for the persons who predispose to eating disorders. These factors shall help the nurse to recognise early signs of eating disorder behaviors. The literature review is directed to the nurse and will answer the issue: Which groups in the community run the risk of developing eating disorders? Furthermore, this knowledge shall lead to a better understanding of persons having eating disorders and be used as an aid in his/her encounter with these patients. The method was a literature review based on eight scientific articles, which were interpreted on the basis of the competence of the nurse.