Implementeringen av tablets ämnade för inspektioner inom drift och underhåll av vägar har studerats och utvärderats med målet att fördjupa kunskaperna inom drift- och underhållsbranschen och skapa effektivare arbetsmetoder som gynnar alla byggprocessens parter.  Examensarbetet är utfört hos Peab på deras anläggningskontor i Sundsvall och implementeringen har ägt rum på deras driftområde Sundsvall som består av cirka 122 mil statlig väg där Trafikverket är beställare. Genom litteraturstudier, tester av tableten och deltagande observationer så har tabletens användbarhet och utvecklingspotential analyserats och slutsatser har dragits för att ge Peab feedback på deras innovation med ett antal förbättringsförslag. Utvärderingen blev ej fullständig då Peab inte hann införa tabletsen inom vägdriften innan de 10 veckorna för examensarbetet var avslutade. Att använda tabletsen inom vägdriften kommer att effektivisera inspektionerna med dels digital dokumenthantering och det viktiga införande av GPS positionering  i de fordon som utför inspektionerna. Detta kommer bli mycket smidigare än den tidigare arbetsmetodiken där i stort sett alla processer innefattande mycket onödigt pappersarbete. Peab rekommenderas fortsätta att se utvecklingsmöjligheter med tabletsen inom andra områden av vägdriften samt fullfölja utvecklingen av tableten för att få en användbar produkt. .

In this report a systematic working procedure for risk classification of processing equipment from a maintenance point of view is described. How this system has been worked out is also an important part of the report. The classification system is adapted for use in complex processing plants. Preemraff Göteborg has been subject for the underlying study and application of the system.The system aims to give a good overview of the maintenance related risks at the plant. Furthermore, the analysis result is a good motivation for the suggested maintenance activities and as motivation for extended or decreased maintenance resources in total.

Costs of maintenance on combines are a subject of interest thus it constitute a large investment and cost for the individual farmer. Therefore it is important to have up to date knowledge and the right facts to be able to do reliable calculations on one of the largest investments for a farmer. The aim of this study was to compare costs of maintenance on combine/threshingmachine with the computer program for advising environmental issues in agriculture, STANK. Interviews took place and data were collected by handing out questionnaires to 20 farmers. A similar study conducted by Neuman (2003) investigated costs of maintenance and compared these with STANK. The results of this study have also been compared and examined related to data from SLA - Skogs och Lantarbetsgivarförbundet. The result shows that 18 out of 20 combines were given a higher cost of maintenance when using STANK compared to the numbers in this study.

Today, maintenance is a big part of the daily life on board ships. It is also one of the bigger expenses a shipping company has and without any loss of quality tries to run as economically advantageous as possible. In the hunt for economical savings the shore-based industry has subsequently applied the use of condition based maintenance, CBM, were a component is maintained according to its actual state. This leads to a reduction of maintenance costs since no parts are unnecessarily replaced. However, within the maritime sector a periodical maintenance is still the most commonly used maintenance system.The purpose of this paper is to chart the factors that are the reason for the low implementation of CBM on board the Swedish merchant fleet's ships.

This diploma work handles how some parishes of the Swedish Church administrate their building properties.The report also includes how some external property managers in Sweden work with maintenance plans and other maintenance issues. Further, a number of deficiencies have been identified and suggestions to workarounds are treated. The conclusions drawn in this thesis are based on the author´s experience in the field, performed interviews, and literature studies. The result of the work shows a general lack of knowledge in many parishes what concerns regulatory requirements, properties with no maintenance plan and substandard supervision resulting in unnecessary and expensive repairs. Based on these results, different plans for the maintenance of the building properties of the Swedish Church has been proposed..

The economic crisis has affected the airline industry as much as it has affected all other industries in the world. The small airlines and maintenance organisations must find new opportunities and options in order to survive the harsh crisis. Priority Aero Maintenance is now an approved maintenance organisation performing maintenance on aircrafts, engines and components. The company sees economic gains in the future by becoming an approved organisation that follows the European Aviation Safety Agency guidelines (EASA) and meets the requirements outlined in the rules of Part-M.In order for the company to become an approved organization, responsible for continuing airworthiness of aircraft, a handbook should be presented to the local authority. This handbook describes the company?s responsibility for the continuing airworthiness in order for the authorities to get an insight into the company and its work.This thesis resulted in a draft of CAME (Continuing Airworthiness Management Exposition) and this draft has been approved by Priority Aero Maintenance.The CAME will in the future be used by the company as a basis for developing a more detailed manual to be presented to and approved by the Swedish Aviation Authority (Transportstyrelsen)..

AbstractThis report describes our ten week long thesis work which is the last task in our education in mechanical engineering at Linköpings University. The project has been performed at Siemens Industrial Turbomachinery AB?s service department. The company which is located in Finspång produces, sells and provides service for steam and gas turbines around the world.The purpose of this project is to help Siemens develop their maintenance programs for two of the auxiliary systems which are a part of the complete steam turbine system. These are lube and control oil systems.The project is restricted to two of Siemens maintenance products, No Stop Check (NSC) and the annual Safety Inspection (SI).

Presently Sjöfartsverket do their maintenance according to a standard program, which means that every maintenance task will be done when the task limit occurs. This leads to a very long downtime for the aircraft in some occasions and very short downtime in others. The goal with this work is to reach a higher regularity of the aircraft operation. To reach a higher regularity for the operational needs, this work will present a hypothetic better maintenance concept for Swedish Maritime Administration. The concept is based on equalized maintenance structure, which means that every maintenance occasions are meant to take the same time to perform.

Föreliggande studie har undersökt flera gränssnitt i en helikoptersimulator som visar horisontell och vertikal drift; en taktil, en visuell och en bimodal display. Syftet med studien var att undersöka om det är med fördel att använda displayer som visar på drift horisontellt och vertikalt. Dessutom var syftet att undersöka om taktil display leder till lika bra prestation som med en visuell display, eller kommer kunna användas som komplement till den visuella i en bimodal kombination. I studien deltog 12 försöksdeltagare som fick i uppgift att i en helikoptersimulator försöka stå stilla i luften (s.k. hovra) på en höjd på 8000 fot med hjälp av varje driftdisplay under två minuter.

Stockholms spårvägar växer i allt snabbare fart, och det är allt fler kommuner som är intresserade av den typen av transportmedel. Något som idag är en brist inom spårvägsindustrin i Stockholm är kunskap och erfarenhet om spårvägsämnet. Drift och underhåll har varit minimal eftersom det inte har prioriterats sedan Tvärbanan öppnades. Detta har lett till för tidig reinvestering av gatuspår i mångmiljonbelopp.Då det förekommer olika förutsättningar som måste tas hänsyn till i form av buller, mån om plats och geoteknik finns det många konstruktioner att välja mellan när en spårväg ska byggas. Denna rapport har som syfte att underlätta val av spårvägsinvesteringar i framtiden.

AbstractThe aim of this examination paper is to get an overview on the ?no-maintenance? windowsthat exist on the Swedish market, like plastic and aluminium windows.By way of introduction the reader gets knowledge in the background and problemformulatethat this subject has. This introduction explains why it has become so popular to changeyour windows into plastic- and aluminium windows and there is an existing scepticismagainst PVC and aluminium as construction material for windows.The main part of this report is constructed by segments of interviews where bothproducers of windows and stakeholders gets to answer questions about their viewing onno-maintenance windows from a material and construction point of view and where theproduction is headed to in the future. This is followed by an evaluation of a questionnaireon how pleased the house owners that changed their old windows to no-maintenancewindows are, followed by an inspection of windows made up from wood and an aluminiumclothing, windows made from only aluminium and PVC-based windows. It ends with atheory part about the materials PVC and metal based upon facts included in literature.By reading this report you can draw the conclusion that no window can be entirely nonmaintenancebut that the materials PVC and aluminium still are good substitutes for woodto lessen the maintenance..

AbstractThis report was undertaken at the request of the Management and maintenancedepartment of Swedish National Road Authority (Vägverket Region Sydöst) inJönköping.In 1992, the management and maintenance of Swedish roads were laid out onexternal contractors. When putting out a tender for the work, the foundation isfrom a national set of rules which are in constant change. This report is limited towinter road upkeep.The trend in the invitation for tenders is that it is moving from the moreconventional executional demands towards the less controlling demands. Thedownside of functional, less controlling demands is that it is difficult to articulatehow to measure them. The order authority therefore has to find ways to makesure to get what has been paid for.In connection to the invitation for tender of winter road upkeep for 2005, the newset of rules, ATB Vinter 2003 was deployed.The main purpose of this thesis is to see which the big changes in the set of rulesare and how these changes affect the organisation and activities of the contractor.It is also studied how the changes in execution is perceived by road users and howit affects the possibilities of the contractor to come as a newcomer to a new areaof administration.Interviews and examination of sets of rules has led to a list of a number ofchanges that the contractors feel affect their work in any sense.Views from road users that have come in to the order authority have beenscrutinized to see how they have experienced the change.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.

At Forsmark nuclear power plant a new course called "education in everyday safety" has been started in an attempt to improve the safety culture. The goal is to spread the of expectations and approach the maintenance management has set, to all employees working at the plants. During the course, theory is mixed with practical tasks to reach a common view how work should be done to achieve safety for the plant and the people that work there.The practical tasks are done inside "maintenance simulators". They are built inside 20 ft containers which contains two dummy pipe systems. On the pipe systems some valves, a flow meter and a pump has been installed.

Benchmarking is an established method of working which is often used in order to develop the quality of the organization. However, almost 70% of the organizations with benchmarking fail due to the lack of planning and structuring of the benchmarking exercise. Maintenance sections in the paper and pulp industry are one of those who have decided to conduct benchmarking. Therefore, the purpose of this study is to gain knowledge of how the maintenance sections in the paper and pulp industry deliberately structure and plan to use benchmarking as a driving force for quality development in the maintenance sections.The study is a hermeneutic case study. Telephone interviews and document analysis have been used as data acquisition methods.The results show that there is a lack of both planning and structuring in the benchmarking process, and lack of management commitment for quality improvements within industrial maintenance.