This Master?s Thesis deals with a special problem that may be of importance when planning a frequency hopping mobile communication network. In normal cases the Frequency Assignment Problem is solved, in order to plan the use of frequencies in a network. The special case discussed in this thesis occurs when the network operator requires that the frequencies must be arranged into groups. In this case the Frequency Assignment Problem must be solved with respect to the groups, i.e.

In order to be able to change, to maintain competitiveness as a company in a world where rapid changes is part of the daily life, it is crucial to have knowledge and methods in how to change. One method, originally developed in Finland, is the Change Laboratory. This method is said to be efficient, not only concerning change aspects but also learning, since change and learning in this method is intertwined. This Master Thesis (20p.) tells about the process of conducting a Change Laboratory with a Swedish high-tech company and analyses factors in the process that makes change possible..

To establish sustainability reports is an increasing trend for more and more companies. This has led to a spread of the international framework Global reporting initiative, GRI, guidelines to make a sustainability reports. This trend has got a lot of critics from various stakeholders who believe that companies in these reports communicate the information in a way of window dressing. Both negative and positive information has to be represented according to GRI: s principle of balance.  Window dressing is created by adding a greater emphasis on the positive information. The researchers review the context of the negative information to study the extent to which it is reported and whether there are patterns and variations in the reported information.

A pilot study conducted on four patients, which we received from the Sahlgrenska University Hospital, who were all potential candidates for a cochlear implant. We fitted our test subjects with a pair of frequency compressing hearing aids called Phonak Naida V SP during the study and let them evaluate them for about seven weeks. Measurements made with monosyllabic words throughout the study showed significant differences in speech perception (p?0.05) compared to their regular hearing aids in 3 out of 4 cases. De-activation of the frequency transposed function showed significant decreases in 3 out of 4 cases compared to when it was activated.All test subjects were satisfied with the new hearing aids and chose to keep using them at the end of the study..

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

This thesis deals with the field of warehouse management, focusing on frequency control of stock. The purpose of the thesis is to reduce the warehouse staff mileage by placing an article based on its number of picks, i.e. how frequently it gets picked. In order to achieve relevant results the following four questions have been answered in the thesis: How should the articles be placed with regard to the picking frequency?Which factors, if any, needs to be addressed beyond the picking frequency when articles are placed based on frequency?Can the present picking system be improved?Is frequency placement with regard to the picking frequency profitable to implement for the company?The thesis is based on literature studies and on the data that has been collected from the company?s business system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The earmould acoustics affect the amplification that the hearing aid is programmed to give to its user. It is therefore important that the choices made for the earmould are correctly done. One choice is regarding the shape of the soundbore that affects the frequency response of the hearing aid above a certain cut-off frequency. The purpose of this project was to measure the frequency response when altering the shape of the soundbore in the earmould. Additionally, the aim was to examine how the frequency response is affected when the shape of the soundbore is not set or is not possible to set in the software when programming the hearing aid.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

Automatic milking systems (AMS) provide the opportunity for less manual labour and an increased milking frequency. But in order to reach an optimal milking frequency a well-functioning cow traffic is crucial. There are many factors affecting cow traffic but one factor that has not been studied thoroughly yet is the effect of different light intensities during the night, 22.00 h to 05.00 h. Therefore the aim of this study was to determine the effect of different light intensities during the night on number of selection gate passages (GP), milking frequency and milk yield. The study was conducted as a Latin square were three light intensities were applied: LOW (11 ± 3 lux), INT (33 ± 1 lux) and HIGH (74 ± 6 lux), in three different herds.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.