Certain types of waste, e.g. bottom ash originating from municipal solid waste incineration (MSWI bottom ash) can be used as road construction materials. A potential problem is the possibility of substances leaching out of the road and spreading in the surrounding groundwater.The aim of this master?s thesis is to conclude whether hydrogeological type settings can be employed to, based on local conditions, provide an estimate of the probable spreading of these substances in the surrounding groundwater, and whether certain types of soils can be identified as being less suitable for the localization of a MSWI bottom ash road. A hydrogeological type setting is defined as a mappable unit with similar hydrogeological properties.

Åtta semi-strukturerade djupintervjuer genomfördes i syfte att kartlägga svenska formgivares och förlagsanställdas strategiska och kreativa arbetsprocess samt olika attityder vid arbetet med praktverk och coffee table-böcker. Dessa böckers termer och definitioner diskuterades även, samt boktypens förut-sättningar och utmaningar på marknaden. I denna rapport presenteras funna teman rörande dessa tankemönster och attity-der, samt en generell beskrivning av arbetsprocessen. Produktionen av coffee table-böcker och praktverk fanns vara komplex på grund av att den involverade många personer, tog lång tid i anspråk, var kost-sam och hade relativt små vinstmarginaler vilket därmed kunde förenas med vissa risker. Respondenterna upplevde generellt arbetet som spännande, roligt och givande.Studien belyser även förekomsten av en viss diskrepans vad gäller associationerna till termerna ?coffee table-bok? och ?praktverk?.

Over an extended period of time there have been plans to establish a shared facility in Lennheden to extract groundwater from the Badelunda esker to provide drinking water for the cities of Borlänge and Falun. The city of Falun is dissatisfied with the quality of its drinking water and the city of Borlänge is concerned about the risk of contamination of its existing groundwater supply at its current location. To provide a basis for a decision on this issue, the company Midvatten AB has been commissioned to perform hydrogeological investigations in the area of Lennheden.The purpose of this thesis is to design a functional groundwater model of the area between Lennheden, place of planned extraction, and Övre Tjärna, place of existing extraction, to get a better understanding of the groundwater situation in the area. A groundwater model enables simulations of different scenarios in risk assessment and contaminant transport. The aim of the thesis is that the model can be used as an aid in Midvatten?s investigations in Lennheden and that it also can be used in future projects in the area.The model has been made in Processing Modflow 5.3 and encompasses an area of 19,5 × 11 km along the Badelunda esker and the river Dalälven between Djurmo and Frostbrunnsdalen.

The research group Soil and Water Management at the department of Soil and Environment at theSwedish University of Agricultural Sciences in Uppsala are studying greenhouse gas emissions fromcultivated peat soils. To measure carbon dioxide emissions from peat soils in the field the researchgroup are now using two portable carbon dioxide meters (Vaisala GMP343). For practical reasons,they plan to acquire a new type of automated field meter. The aim of this study is to evaluate thepresent meters to see how environmental conditions and instrument settings affect the results,which is meant to facilitate the introduction of the new field meter when the meters needs to becompared. As a part of the study the relationship between groundwater level and carbon dioxideemissions from peat soils will be investigated.The evaluation of the two carbon dioxide meters was made by connecting them to one single airtightsystem, with the aim of creating identical measurement environments.

With the prospect of future construction on the Skutskär Pulp Mill property, Stora Enso Fine Paper has initiated an investigation of soil contaminants and a risk assessment of these contaminants. A soil and groundwater investigation has therefore been conducted on an open area of about 16 000 square meters, situated between the current wood room and digester house. To be able to integrate this study into an investigation for the whole industrial property, the study has been carried out as a phase 2 study according to the Swedish Environmental Protection Agency?s Methods of Inventories of Contaminated sites (MIFO).The site investigation has involved soil and groundwater sampling, together with the analysis of heavy metals and organic contaminants. The degree of hazard posed by the contaminants, the level of contamination, the potential for migration of the contaminants, as well as the degree to which protection of human health and the environment is required in the area, have been weighed together for an overall risk assessment of the area with regard to human health and the environment.The investigated area was built up by filling in the coastal waters.

The main purpose of this thesis is to examine what problems may arise when converting class symbols from one classification scheme to another. In order to fulfill this purpose, a conversion table between parts of the Swedish online-version of the UDC and the Swedish classification system SAB was constructed. For main classes 0 and 3 every class number from this abridged version of the UDC was converted, whereas for the rest of the main classes only class numbers with fewer than four figures were converted. The conversion table was constructed using the alphabetical index of SAB and different UDC-indexed library catalogues. Various aspects of the conversion table were then analysed using methods mainly devised by the authors themselves, but inspired by lexicography and multilingual thesaurus construction.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

AbstractWe have been honored to work with a company called Frimeko AB. Frimeko is located in Halmstad where they make and sell furniture for school and office environment. Our task is to construct a new, more modern sewing machine table for schools. The task is to use the same function as before, ease the storage and production of sewing machine.Efforts to develop the new sewing machine table resulted in that we came up with an innovative design that the company is pleased with.During this project the group has used the method from ?Fredy Olsson Konstruktion? .

In some coastal areas in Sweden water shortage sometimes appears because the withdrawal of groundwater is greater than the groundwater recharge. It creates a situation where the available groundwater is insufficient to support residents and businesses with drinking water. The high withdrawal of groundwater also creates a risk for saltwater intrusion to drinking water wells. The problem most commonly occurs during the summer when the groundwater recharge is low, but the population is high, due to tourism and summer residents.The purpose of this study was to investigate how local water supply in areas affected by water shortage can be solved as sustainable as possible. The work was divided into three parts where the first part comprised of a literature review on water systems in which four different options were investigated: artificial groundwater recharge, rainwater harvesting, desalination and water reuse.

The stability of railway embankment is essential for safe transport. In order to ensure safe transport, water should be allowed to freely drain. Furthermore, as the engine driver has to be able to see signs, and people working on the embankment are supposed to easily see flaws on the rails to ensure safety for the passing trains, plants should not be allowed to grow on the embankment. In Sweden there are 12 000 kilometers of railway tracks and 25?30 % of them are treated for weed control every year.

The municipality of Västervik, with support from Envipro Miljöteknik AB, is carrying out a main study of the minefields at Gladhammar. Mining of iron, copper and cobalt under different periods from the 16th century until the end of the 19th century has led to discharges of metals to the lakes situated downstream. The aim of the main study is to investigate the possibilities to reduce the environmental load on the surrounding ground and water caused by heavy metals from the mine. The present report is a part of the main study. The aim of the work is to investigate the geochemistry of the groundwater.

Background: Postoperative infections are a serious patient safety problem and affects about 3 % of all patients undergoing surgery. The consequences are prolonged hospital stays, high social costs, increased use of antibiotics and impaired quality of life for the patient. It has been shown that postoperative infections may be caused by contamination already in the operating room. Today we know that there is growth of microorganisms on the instrument table´s top, but there is a research gap about the instrument table's edges.Aim: To examine if the sterile drape on the instrument table´s edges are sterile after finished surgery.Method: Contact plates are printed on strategically selected areas on the sterile drapes top and edges. In the pilot study, a total of 51 cultures were taken at the end of three operations which lasted over three hours.Results: Growth on the top surface and the edges of the sterile drape were detected.

Nitrogen deposition leads to environmental damage in areas where the nitrogen deposition is high. Southwest Sweden receives an annual nitrogen deposition of up to 20 kg N/ha. Nitrogen that is not assimilated by the vegetation is accumulated in the soil, which may lead to nitrogen saturation and an elevated risk of nitrogen leaching. Nitrogen leaching from forest areas in southern Sweden has proven to be higher than from agricultural areas, which have been thought to be the main contributors to elevated nitrogen levels in rivers and lakes. The amount of nitrogen that leaches depends on the fraction of the total nitrogen in the soil that consists of nitrate, since nitrate is easily transported through the soil.

The aim of this work was to find out what potential contaminants from roads, residential area and businesses within Svedens industrial area that can affect groundwater quality and quantity. Data collection was from SGU, VISS, internal material from Gävleborg county Administrative Board and Gävle municipality archive. GIS software ArcGIS was used to create the map images in the work. The studied area is located approximately ten kilometers west of Gävle city and consists of the esker Valboåsen, which is a glacifluvial deposit that in its central parts consist of coarse material that is overlaid by sand, clay and silt. North of esker Valboåsen there are the river Gavleån which has an inflow to the groundwater in the esker. This inflow represents the largest part of the groundwater recharge.

Erasteel Kloster AB Söderfors have been commissioned by the county administrative board in Uppsala län to make an inventory of possible contaminations in theirs industrial- and landfill areas on the basis of the Swedish Environmental Protection Agency?s; ?Method of Surveying Contaminated Sites-phase 1? (MIFO-fas 1). The inventory starts with maps and archive studies, place visits and interviews, and finally a risk classification is done. A risk classification is a compilation of four categories; pollutant toxicity, contamination level, possible spreading condition of the pollutant, sensitivity and protection value of the environment. In this paper five partial areas (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin, Östra verken and Myrområdet) have been described from a historical point of view. Only parts of four areas have been risk classified (Holmen- and Jörsöområdet, Järnsvampsområdet, Ingsådeponin and Östra verken), due to that the other areas isn?t own by Erasteel Kloster AB. Holmen- and Jörsöområdet Holmen- and Jörsöområdet have during the entire activity time been carried out as the production core in the company.