The thesis aims to be an informative study for landscape architects and hopes to contributeto an understanding of ways water can be used and managed at sites lacking open, greensurfaces.The title "intelligent water design" should evoke the reader?s thoughts concerning intelligentaspects of water. Text, images and the design proposition give hints about these aspects.In the first part of this thesis, various examples of water design are presented. The chosenexamples are all applicable in urban environments with a high percentage of impervioussurfaces.The second part examines Gjutarplan, an urban square in the centre of Kallhäll, in Järfälla,north of Stockholm. Gjutarplan is first framed in a geographical and historical context.

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

This degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

AbstractWith increasing population and increasing demands for comfort and thus an increase in energy demand, it is necessary to examine various energy-efficiency measures. This work deals with the ability to control the flow through the heating system to achieve the desired comfort with as little energy as possibleA heating system contains of different parts, roughly speaking, you can divide it to three main components: Heat source, Distribution and Heat emitters. All components are working together to bring heat to the building. What is examined in this report are different ways of adjusting the flow and supply temperature and how it affects comfort and energy use in a building.At today ?s date the conventional method is to use a high flow through the heating system, which affects pressure drop and cooling of the fluid.

This thesis examines a possible control strategy to minimize flow fluctuations in Uppsala?s district heating system. High variations in flow rate may lead to complications caused by hydraulic constraints in the district heating system. These complications, such as inadequate pressure and temperature levels, increase the risk of heat delivery failures. It is therefore important to avoid such situations both for the producer and for the customers.Typically, the forward temperature is controlled by using a rough correlation with respect to the outdoor temperature.

The European Water Framework Directive (WFD; 2000/60/EC) was incorporated into the Swedish legislation in 2004 through the ordinance Förordningen om förvaltningenav kvaliteten på vattenmiljön (SFS 2004:660). The objective is that all water bodies shall reach a good status by the year 2015. In Sweden the comprehensive plans of the municipalities can play a large role in reaching these goals. A comprehensive plan deals with the long term water and land use of the municipality, which can facilitate an early consideration of water management in the planning process of the municipality. In Sweden five river basin districts have been established in accordance with the Water Framework Directive.

This bachelors thesis was made forWallenius Water AB to develop a basisfor an Airpurifier prototype. Wallenius Water isone of the world's leading environmentaltechnology companies engaged inchemical-free water treatment based onUV-radiation. The thesis aim was toproduce a basis for a prototype that canbe used in three applications:Standalone, RAS systems and ventilationsystems. The work includes anintroductory description of the theorybehind AOP technology based on aliterature review on the subject. Asurvey of products currently on themarket and a product specification hasbeen used as the basis for thepreparation of a number of concepts inthis report.

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

The characteristic of services as an effort carried out in a "moment of truth" implies a risk for failures. This study sheds new light on how alternative offerings that customers are initially exposed to can affect satisfaction and loyalty in the service failure and recovery context. More specifically, two aspects of the initial offering are studied: promised general service quality and the presence of a promise about a specific product attribute. Based on a presentation of the main theoretical perspectives, hypotheses are formulated and a scenario-based experiment in a hotel setting is designed to explore these. The results indicate that a higher level of promised service quality can result in more positive evaluations of satisfaction and stronger word-of-mouth intentions than for a lower level of promised service quality.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.

Poly- and perfluoroalkyl substances (PFASs) are a group of environmental contaminants that have gained increasing attention due to their potential to bioaccumulate, environmental persistence and potential toxicity. PFASs have been found in surface water, sediment, air, soil, sludge and ice caps globally, as well as in wildlife and humans. Furthermore, PFASs have also been detected in drinking water, leading to raised concerns for human health, since drinking water is one of the most significant sources of PFASs for the general population. Conventional water treatment techniques have shown to be ineffective removing PFASs, highlighting the importance for further research to develop efficient removal techniques. The aim of this study was to investigate the removal efficiency of PFASs in water using two treatment techniques; granular activated carbon (GAC), type Filtrasorb 400®, and anion exchange (AE), type Purolite A-600. Additionally, the effect of dissolved organic carbon (DOC) on removal efficiency was studied.

Chapter 1 defines the aim of the project and gives a general orientation about ground heat extractors. In chapter 2 physical processes that could be expected to be involved in the heat transport around a ground heat exchanger are discussed. It is shown from a literature study what amount of moisture transport due to thermal gradients there could be expected in a ground heat exchanger. The conclusion is drawn that the moisture gradient (Sr) is of same magnitude as the driving temperature gradient (°C). At the expected amount of increased moisture around the pipes the moisture transport could be considered to have a little effect on the brine temperature.

Syftet med studien var att studera hur fenomenet självläkning framställdes i nationell och internationell forskning. Studien omfattar tre frågeställningar: (1) Hur definieras alkoholmissbruk i artiklarna? (2) Hur definieras självläkning i artiklarna? (3) Hur framställs självläkningsprocessen i artiklarna? För att besvara dessa frågeställningar gjordes en selektiv kunskapsöversikt och en kvalitativ innehållsanalys användes som metod. Kunskapsöversikten utgjordes av tio forskningsdokument vilka omfattades av kvalitativa och kvantitativa undersökningar mellan åren 1996-2007. Studiens position är postmodern.

This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.

Stage-discharge equations for lakes without disharge measurementsSimon AnderssonIn 2015 all lakes, rivers, coastal water and groundwater should be of good ecological statusaccording to the water framework directive from the European Union. In the process ofimproving the quality of Swedish water bodies, knowledge of where problems occur isneeded in order to utilize the resources optimally. The ability of lakes to store water is animportant factor since it controls the flow of water through the country. A stage-dischargeequation is a mathematical relation between discharge from a lake and its water level. Bybetter understanding of stage-discharge equations for lakes, their storage capacity can bedescribed better in hydrological models.This master thesis aims to evaluate methods for determining stage-discharge equations forlakes where a variable amount of field measurements is available.