The study focuses on mapping how well prepared the counties in the west region of Sweden is in case of restructuring. The study explores what kind of activities and routines that contributes to prepare the organization for restructuring. The study also aims to investigate the effect of precedent restructuring, and if the counties who experienced restructuring are more prepared than others.The research within the field of restructuring characterizes of an evaluating nature and the focus has been after the restructuring occurred. There have also been a lot of studies of the negative consequences on individual and organizational level. Since downsizing is a frequently used method by management despite its consequences is it important to investigate how organizations can learn and thereby be more prepared for restructuring.

The author contacted designers Claesson Koivisto Rune Arkitektkontor in August 2007regarding his Master thesis at KTH. The company had discussed the possibility of creating achair made from molded pulp. The author was taken on as a manager for the project. Theobjective was to produce design documentation for a paper pulp chair which was to belaunched at the in 2008 Milan Furniture Fair. The purpose of the thesis was to develop aproduct with scientific methods as well as to investigate how to make collaboration betweendesigners and engineers easier through communication.The project went through four basic stages: Information, Analysis, Synthesis and Evaluation.Information on paper pulp, molded pulp, chair design, sitting postures and the existingmarket of molded pulp furniture.

Today's urban centers become denser, which contributes to higher demands on sound and noise. It is therefore highly relevant to build homes with good sound environment while maintaining living space. This thesis aimed to reduce the current concrete walls and see how the mass law affects the reduction index value and flanking transmissions. Handmade calculations were calculated according to the Swedish standard SS-EN 21354-1, where only air sound was calculated.Calculations we­­­re performed on wall elements with different weights and thicknesses, and compared with results from Bastian.In Bastian calculations of flanking transmissions were also made, this was made to see the impact of the flanking transmission when changing the mass per unit area. Mass law's impact was examined by flanking transmission and the result shows that they are not affected as long as the ratio between the thickness and the density remains the same.A questionnaire survey was conducted to determine the actual sound experience; this questionnaire was conducted on three concrete buildings in Växjö.

The purpose of this thesis is to investigate if vacuum insulation panels are a competitive alternative to traditional insulation.Vacuum insulation has been used as insulation in buildings in Germany and Switzerland for a few years. In Sweden the high-performance insulation material is mainly used in refrigerators, freezers and vacuum thermoses. The development is proceeding well and vacuum insulation is becoming more common in the construction industry. Since it is a relatively unexplored material on the market there are many flaws and problems with the material.The questions we have chosen to answer in this report include an increased knowledge of vacuum insulation, various problems that may arise when handling/installation and the pros and cons of vacuum insulation compared to standard traditional insulation.The methods we have chosen to use in this report is a literature study, interviews with various suppliers and manufactures and calculations to show the differences between traditional and vacuum insulation. Vacuum insulation is 5-10 times better insulation than standard traditional mineral wool insulation, mainly at the beginning of its lifetime.Vacuum insulation panels (VIP) have a service life of approximately 50 years, whereas traditional insulation has a service life of approximately 100 years.

This essay will discuss the Roman God Janus, as a figure of speech, in four different texts written by Publius Ovidius Naso, Michel de Montaigne, Francis Bacon and Elijah Fenton. The Janus figure could also illustrate the relationship between the past, the present and the future, because of the attributes of looking back and forward, in both space and time, that Janus was said to possess. Reinhard Koselleck's ideas of space of experience and horizon of expectation will be used as an analytical approach, thus creating a dual purpose for this essay. On one hand to understand texts about Janus, which implies an understanding of the changes over time associated with the history of ideas of Janus, and on the other the past's importance in relation to the future, which includes an understanding of Janus via Koselleck's thesis about the change in relationship between experience and expectation.The question formulations are as follows: How has the Janus motive changed over time in the researched texts? How can the literary use of Janus show the changed relationship between the space of experience and the horizon of expectation, and in a wider context between the past and the future? Janus has gone from being a physical presence, as the arcs of the Forum Romanum in ancient Rome, to becoming a tool for authors, one that spans many literary rooms.

This thesis within the field of Integrated Product development at the Royal Insitute ofTechnology, performed at Primary Development Dishcare at AB Electrolux, is supposed to finda solution to enhance the hygiene inside an Electrolux dishwasher. The outcomes of this thesisare functional prototypes to evaluate the efficiency of disinfection by the use of Ultra VioletLight and Ozone.The thesis has followed Electrolux Primary Development process, with delivarables andcheckpoints.Ultra violett light with a wavelength of around 264 nm penetrates through the cell wall ofbacteria and micro organisms and causes a molecular rearrangement of the cells DNA. Thisprevent the bacteria from reproducing and it is considered dead. Commonly used UV-C lampstransmits the wavelength 254 nm which is very close to the optimum for germicidal action.A competitive brand have reacently launched a dishwasher claiming to achieve greaterdisinfection with an UV feature. This dishwasher was tested during the thesis and proven tohave a very low effect on the hygienic result.Two prototypes were devolped and tested for UV disinfection of dishware.

The purpose of this study is to find out what the educators idea of educational documentations in ratio to childrens inclusion and impact in pre-school are, together with the child's own perception of the concepts of documentation. We proceeded from the following issues: What are the significance of educational work according to the teachers? What is the teachers idea of a childs impact and inclusion in educational documentation? In what way do the children have influence over, and inclusion in educational documentation? What are the childrens feelings of the documentations? In order to find answers to our questions, we used qualitative examinations consisting of seven educators and seven children from various pre-schools in Stockholm, and thereby, we have analyzed our results. As our theoretical frame, we used ourselves of Vygotskijs and Säljö's sociocultural perspective that is about "progress and learning", which is achieved by interaction and cooperation in a social context. The result shows that the aim of educational documentation is to reveal the childs development and learning, and also to involve the parents by putting up documents on the wall.

The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.

The way we socialize today is radically different from how it was only twenty years ago. Since the arrival of the Internet more and more of what we know about the lives of our friends comes from text-based social networks, or blogs. This means that we all, more or less, have become authors of our own life stories and that the reality we live in have become fictionalized. In this paper I explore what effects this postmodern process of dissolving boundaries has had on the autobiographical genre, where the line between fiction and reality is traditionally stressed. By analysing Carina Rydberg?s (b.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

This degree project has been carried out by Niclas Andersson and Sebastian Zwahlen, students of the Innovation and Design Engineering Program at the Faculty of Technology and Science at Karlstad University. The project was carried out during the spring 2010 and includes 22, 5 ETCS credits.Initially the group had contact with the company Mavis möbler AB. Mavis gave the group the task of developing a new bedroom product. To assess the needs and problems of bedroom behaviors, an extensive questionnaire and several interviews were made. This became the starting point for further work.According to the results uncovered during the market research a vast problem was found with temporary clothing storage.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

Travelling by train has increased during the last decades in Sweden. This has put pressure on the existing infrastructure and has created problems with delays and cancelled departures. The railway is a complex system with mutual dependencies and high vulnerability for disruptions. The situation for the railway system in the Stockholm region is today strained. The capacity is fully used.

Syftet med uppsatsen är att öka förståelsen för varför det är problematiskt att nyttja det balanserade styrkortet som ett strategiskt ledningsverktyg. Förhoppningen är att utveckla en modell som delar in i BSC-arbetet i fyra olika faser. Hypoteser som belyser de största problemområdena i respektive fas kommer även att formuleras. Vi har utgått från en induktiv ansats. Uppsatsen har en explorativ karaktär då vi vill försöka bringa klarhet och förklara problematiken med styrkortsarbete.

A tax penalty is an administrative penalty and is levied when the tax obligated provides false information for the guidance of their own taxation. Further can the taxpayer also be punished for tax evasion for the same false reporting. However, this is contrary to the European Convention that we should not be tried or punished twice for the same crime. The Supreme Court has through practice from 2013 ruled that the right not to be punished twice for the same offense shall include the system in force concerning tax and tax offenses. The Supreme Court has by this judgment determined that the system of penalty and tax evasion is not compatible with the dual test ban.In the light of the judgment the Government submitted in November 2014 a draft to the council regarding double test ban regarding penalty and tax evasion.