The subject for this Master's thesis is the mission of the public library concerning target group everybody. Control documents, traditions, norms and trends influence how this is interpreted and how the library's service is being formed. The often very abstract terms used to describe the public library's mission makes it open for different interpretations. We are of the opinion that the public library's service should be formed to reflect the needs, interests, and priorities of the community it services, in order to be more attractive and useful.The aim of our study is to examine how the public librarians define and adjust to the mission to satisfy all citizens needs. Why do they choose to concentrate on certain target groups? And what does that show of how the public libraries reflect their communities? Our investigation includes examining six activities aimed at a certain target group and the six public libraries that carried these out.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Regional European Offices with the purpose to represent regions and municipalities in the EU-system have had a substantial expansion over the last years. One example is the North Sweden European Office for the counties of Norrbotten and Västerbotten, consisting of seven different headmen who are representing both the private sector as well as the public system. This diverse leadership representation makes North Sweden a very good example on a so called Quango, organisations that stand under simultaneous influence from both public and private sectors. These Quangos opens up new possibilities to solve public problems, but they also bring together two different working models which is not always easy to handle for a Quango. According to earlier surveys some characteristic Quango problems within North Sweden exist, for example the ability to prioritize and thereby be as effective as possible.

This essay provides an attempt to reflect the notions of violence, right or law and fate in Benjamin?s Zur Kritik der Gewalt, in order to clarify his very dense historical-philosophical reflection on the constitutive relation between violence and law. In contrast to what is most often the case, this essay will not address the notion of divine violence in a direct sense, but mainly focus on Benjamin?s discussion on right and law. The complex of his historical reflection, his attempt to articulate what he calls the ?historical function? not only of violence, but also of law, is crucially related to the notion of fate.

This study was based on measurements of growth and shape of 50 clones of wild cherry, Prunus avium L, in south Sweden and aimed at finding out wether or not any of these clones are useful for commercial propagation. Initially, a short assembly of documented knowledge concerning wild cherry as a timber producing tree species was put together. The study of the 50 clones includes information gathered during the fall of 2006 from four trials located in the counties of Blekinge, Småland and Västergöland. The oldest trial, founded in Tranemåla, Blekinge, in 1992, was focused on offspring and aimed at discerning differences between provenances and at developing an adapted plant material. The other experiments were both clone trials and founded in 2002. These are based on 50 individuals selected from the offspring trial in Tranemåla.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

Syskonbädd, or ?Sibling?s bed? in English, is a short story or drama, written by Swedish author Stina Aronson and originally published in 1931 under the pen name Sara Sand. While the story did not attract wide attention for many years, it has recently been republished and performed on stage, as well as aired on the radio. The plot is centered on Harriet, a woman who starts to see the world with different eyes, in a less strict and organized way. Her new view is welcomed neither by her husband nor society, and the book starts with Harriet?s escape from a ?rest home?, where she has been placed by her husband in order for her to return to her old self.

Grubbe Ventilation AB is a sheet metal and ventilation company who provides design, installation, service, and repair of ventilation. The company is expanding their business by building a new facility in Umeå, Västerbotten. The property is designed to be used for both office and industrial work.Grubbe Ventelation AB has not yet decided upon wish system which is to be established to provide the building with heating and cooling. The consulting firm Umeå Projekt Team has therefore been asked to investigate the possibilities to invest in geothermal- heating and cooling.If the investigation of a geothermal heating- and cooling system would provide favorable results it would be a very appropriate alternative that provides energy at low costs and are an environmentally friendly option as the energy comes from stored solar energy in the ground is provided by stored solar energy in the ground.The facility ´s heating and cooling consumptions are calculated in the program BV2 and the result indicate a heating demand of 185 000 kWh per year due to thermal transmittance, transmission losses, heating of warm water and a cooling requirement of 5500 kWh.Three different systems of geothermal heating and cooling were tested in the computer program Energy Earth Design. The results show no difference in the dimensioning of the drill hole if merely heating were to be used or both heating and cooling were to be established.

This thesis is divided into two parts. Part one contains a general description of the flexographic printingtechnique. Part two contains a more detailed investigation in the areas substrate, inktransfer and trends, which are only briefly commented in part one, and conclusions and comments.The major problem concerning substrate is washboard. This phenomena can be limited if one can control and minimize the amount of glue applied in the single- and double facer, use high surface weight on liner, use low surfaceweight on fluting and control the humidity during the conditioning of the corrugated board. Corrugated board with a smooth surface radically increases the quality in print.

I denna uppsats gör jag en textanalys av tre årgångar av tidskriften Vi föräldrar: 1968, 1983 och 1994. Jag ställer frågan vilka bilder av föräldraskap, framförallt faderskap, som framkommer i tidskriften och hur jämställd relationen mellan pappa och mamma är. Avspeglar sig tankar om ?den dubbla emancipationen? ? det vill säga att både kvinnor och män ska delta i såväl yrkesarbete som i arbetet med hem och barn ? i tidskriften och sker det några förändringar över tid?Som inramning till min analys beskriver jag det samhälleliga och politiska sammanhanget när det gäller föräldraskap och jämställdhet under den tid då respektive årgång gavs ut. Jag använder mig av teoretiska resonemang om bland annat barnorienterad maskulinitet och diskursen om det olika föräldraskapet i min analys.Min beskrivning och analys av de tre årgångarna visar att tidskriften genomgår stora förändringar över tid.

The purpose of this paper is to examine how the target to convert the Swedish military aviation industry towards working within the civilian sector was planned and implemented parallel to the target of building a world-class military aircraft. A number of Government bills have been studied, bills directly connected to the JAS-project as well as bills dealing with civilian project ?s for the military aviation industry. The first group includes bills dealing with the JAS-project ?s role in the overarcing defence policy, as well as the Government ?s bill specifying the guidelines for the JAS-project.

Fler och er anvander idag kohesiva modeller vid simulering av limfogar mednita element analys (FEA). Ett stort problem ar emellertid bristen pa bra ochdetaljerad materialdata. Denna rapport beskriver metoder for att extraheramaterialdata for ett epoxylim (Araldite 2015 fran Huntsman) genom tva olikaexperiment som vardera beskriver limmets egenskaper i olika lastriktningar. Detva provmetoderna kallas "End Notch Flexure" (ENF) och "Double CantileverBeam" (DCB) dar ENF-provet anvands for att beskriva limmets egenskaperfor skjuvning i planet och DCB-provet for egenskaper i planets normalriktning.Experimenten har genomforts i rumstemperatur och i forhojda temperaturer foratt fanga temperaturberoende egenskaper. Vid provningen har sa kallat "DigitalSpeckle Photography" (DSP) anvants for att mata vinklar och forskjutningar.For att validera den erhallna materialmodellen har experimenten aven simuleratsmed FEM.