It is not uncommon for math difficulties and reading difficulties to occur simultaneously. Despite this, math and reading difficulties are thought to have different cognitive profiles where math difficulties are linked to number sense; an innate ability to understand, approximate and manipulate both quantities and numerical information, whereas reading difficulties are linked to phonological ability; an innate ability to understand, create representations of and manipulate phonological information. A possible link between the difficulties is that phonological abilities also could affect mathematical ability. Support for this comes from studies where comorbid math and reading difficulties are associated with more severe difficulties in arithmetic ability compared to those with isolated math difficulties. The purpose of this study is to examine whether isolated math difficulties, isolated reading difficulties and comorbid math and reading difficulties can be linked to deficits in number sense, phonological ability or both of these, and whether comorbid math and reading difficulties differ in performance in mathematical tasks compared to isolated math difficulties for children in second grade.

This is a thesis for a Bachelor Degree Project, performed in the subject MechanicalEngineering. The students Roger Malmberg and Simon Hagberg have carried out adesign project on behalf of the recently established company J&D Assisting systems,located in Halmstad.The project consisted in developing J&D's first prototype of a power assisting solutionfor wheelchairs. A power assisted wheelchair combines human power, which is deliveredby the arms through the pushrims, with electrical motors, which are powered by a battery.The power assisted wheelchair is aimed at customers, who have used a regularwheelchair for a long time, but who have become weaker or just need additional powerwhen driving uphill. This kind of wheelchair will provide additional power for users,which will spare their wrists, elbow and shoulders. The product is torque sensor free andinstead it relies on the velocity.

This thesis has treated a three-axis robot which task is to serve a larger test machine tomove the modules to be tested, from the storage to the test site. The robot is composed ofthree linear actuators; two standard components of ball screw type and a custom-builtactuator of trapezoidal type. The work has mainly focused on the custom-built device to seeif it could be replaced with a standard component. Part of the work has been to look into thepicking tool and to see if there are any possibilities to improve its function.The report presents two different proposals which I decided to call Robot 1 and Robot 2 andthey aim to address the problems arising in the purpose-built linear unit and the X-axislinearity problems. Robot 1 focuses on eliminating the problems that arise around therobot's X-axis, with such simple means as possible and without making excessive materialchanges.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The Swedish market for vehicle inspection is re-regulated since June 2010. More than four years after the re-regulation there are eight companies in the market. Two of these companies are a result of the former monopolist's owners divided the business among themselves. The remaining six companies have entered the market through acquisitions or by building up their business from scratch, these are known as new entrants in the study. The competition has developed slowly and the former monopolist still has the highest market share.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

A large part of the Namibian low income population lack access to grid distributed electricity. This mean they are effectively shut out from basic functions such as lighting, information technologies and hygienic food handling. Hence, finding ways of providing affordable off-grid electricity is an important, not to say critical, task.This master thesis is an innovation and concept development project that has been carried out in cooperation with organisations in Sweden and Namibia. The purpose of the project has been to (1) develop a concept for off-grid electricity supply in Namibia and (2) to gain a deeper knowledge within the area of innovation and product development for the Base of the Pyramid population, i.e. the poorest, but largest, socio-economic part of the global population.Essential in this project has been to acquire user understanding and to identify user needs to create a foundation for developing the concept.

The main objective of this thesis was to develop appropriate strategies and find factors that affect the usability of parameterized designs. This was accomplished by investigate the user-interface and how it is designed to meet the user's information needs. The thesis also embraces the basic theories in terms of investigation, cognitive design principles and human behavior patterns in the interaction with the machine. The approach has led to an explorative investigation in this subject area.The thesis also had the purpose to achieve more efficient ways for development of motor chainsaws at Husqvarna AB's department Global Cutting Equipment. That can be achieved through reduce costs of development per sold unit.

The voltage level in the power grid varies due to variations in load and production. Normally these variations are manageable, but they may be excessively large during a disturbance. If the voltage is too high it may damage the equipment in the grid and too low voltages may cause problems like voltage instability. The magnitude of the voltage variation depends on the short circuit power capacity of the point of interest.This problem may become lore prominent due to automatic voltage regulation that acts on shunt reactors and shunt capacitors. When the shunt reactor is connected or disconnected to the grid it may cause such large changes in the voltage that the shunt reactor starts hunting.

The dog is unique in the way that the adult weight can vary 100 folds between the different breeds. Despite this, most of the breeds reach adult size before two years of age. For the large-breed dogs this means a very rapid growth when some of them can have a weight gain of up to 150 times their birth weight. The most rapid growth occurs when the puppies are between three to six months old and that kind of rapid growth during such a short period of time makes these large-breed puppies very sensitive to deficits and excesses of energy, nutrients and minerals. Some examples can be excess of energy, excess or deficit of minerals such as calcium and phosphorus or deficits of protein. The rapid growth can also make the large-breed puppies predisposed to some diseases affecting the skeletal and joints.

Together with Attends in Aneby a thesis of 15 ECTS (credits) have been undertaken. The assignment was to develop a new incontinence product for single use. Users of the product value comfort, flexibility, softness, comfort and a discreet product. Users are for individuals with incontinence problems that usually receive the products via prescription. The product must also have an attractive price and good quality from the purchase / originator's perspective.Currently there are two models that Attends supplies, which the project intends to develop, (Slips / Briefs and Pull On's).

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

AimThe aim of the study was to develop a method for the survey of play movement demands and temporal patterns in order to enable a descriptive study of the defensive players in American Football. The overall aim was to  improve the understanding of how American Football is played to create opportunities for enhancement of current or developing new training methods to better suit football.MethodFifty plays from a Division 3 college football game on video from 2005 was divided into sequences of action for one player each from the defensive line, linebackers and defensive backs and analyzed with the video analyzing software cSwing. Every players sequence of action was recorded in a spreadsheet and noted on a scaled football field where distances were measured and together with time stamps from cSwing velocity was calculated.ResultsUsing this method it was possible to describe the play movement demands and temporal patterns which was the main task of the study. The defensive end worked on an average 4.61 seconds per play, the distance was 12.4 meters and average speed 2.5 m×s-1. The linebacker worked on an average 4.35 s per play, 13.7 m and at a mean speed of 3.0 m×s-1.

This dissertation is done as a preparatory step for the action plan of environmental protection shall issue to preserve the Phytoecia nigricornis in the country when it is red-listed and classified as vulnerable (VU). My task was to investigate the prevalence of the Phytoecia nigricornis in Halland County. They wanted to see if it existed in Halland (Ehnström, 1999). If it did not exist they wanted to know how to improve its habitat.the Phytoecia nigricornis is difficult to inventory because when it is larvae it lives in the roots and lower parts of the trunk of the Solidago Virgaurea plant and the adult beetles only keeps to Solidago Virgaurea by mating and egg laying and larval caterpillars when they hatch (Bily, 1989; Molander, 1999). Often it is overlooked or missed, and one question was whether it existed  in the whole country or only in those parts where it was previously found in, Skåne, Blekinge and Östergötland (Ehnström, 1999).One problem for the Phytoecia nigricornis is that their habitats is declining.

The Innovation- and Design Engineer program at Karlstad university is a three year long engineer education. In the last phase a final piece is to be done and in this case Boda Borg in Skellefteå is the company in need of product development. Boda Borg is a company in the experience industry and they are located in nine cities from Gällivare in the north of Sweden to Karlskrona in the south. Boda Borg is a franchise company where every facility is their own. As a visitor you will experience physical challenges as well as intellectual in adventure rooms which are serial linked.