In this study I have compared two systems of handling TMR, self-propelled/ self loading mixers and conventional towed mixers, what has been investigated is the time for filling, mixing and feeding TMR as well as maintenance and fuel consumption. The background of this study is the structural rationalization within the Swedish milk production that has put focus on efficiency and reducing of costs. Forage and labour are the two biggest costs in milk production today. The study has been performed by visiting three farms and with a stopwatch measured the times for filling, mixing and feeding TMR. At the time for the visits, the users have been interviewed regarding maintenance and fuel consumption. They have also had an opportunity to give comments of how they experience the mixers. The result of the study after processing is that the average stock in the study can save 74000 SEK a year by reducing time for filling, mixing and feeding TMR to cows with a self propelled/ self loading mixer . The conclusion I can make of this study is that it?s not the size of the stock that decides whether it?s interesting to invest in a self propelled/ self loading mixer, but the presumptions on the farms, for instance forage logistics and mechanical equipment..

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

The county hospital of Dalarna has for the last couple of years carried through a process of digitalization. The result is that within the county it exists image plate systems from two different manufacturers. In an attempt to create a tool for dose optimization and dose surveillance the county of Dalarna would like to investigate if the exposure index from Agfa and Fuji is suitable as a dose indicator. An investigation of the exposure index, S, from Fuji has already been done. This thesis has been continuing the investigation by evaluating the stability of the exposure index, lgM, from Agfa.

Nurses in health care have a responsible and sometimes stressful job. Nowadays there?s a high pace in health care where many decisions have to be made during time pressure, a lot of information has to be transferred between health care units and sometimes complicated equipment are used. Cases of mistakes are reported more than ever to the national committee responsible for health care. Many of the mistakes, where the nurses are involved are due to the nurses? stress.The aim of this study was to gather information to describe causes of stress in nursing care and the nurses? experience of stress influence on health care.The method that was chosen for this study was a literature review where scientific, critically reviewed articles were analyzed.  The analysis resulted in two main themes.

The Income Tax Act is enacted what criteria must be met to obtain a tax reduction of household work. Household work is the common term for ROT- and RUT-works. The purpose of the tax reduction is to increase job opportunities and to discourage that undocumented work performs.It is only for the labor cost as tax reduction is given for. The concept of labor cost is defined in law as it is not comprised of cost of materials, equipment or travel. The preliminary work provides no closer explanation what the labor cost includes.

The purpose with this work was to investigate some alternatives for an effective handling with grain, to find the most economic alternative. It is not common that moisture content is below 14% when harvesting grain in Sweden. To store the grain safe it has to be preserved in some way. I have described some of the most common systems for preserving grain in this paper. I have used the systems as a basis when I made calculations in handling the grain for a company. I have chosen a company placed in south of Sweden. The productions are crop farming and pork.

Mobile devices such as tablets and smartphones are quite common in this day. The author of this thesis wanted to know how common these mobile devices are in the building industry and how they are used and what potential an app could have. The author thus conducted an investigation on this matter, mainly in the form of interviews.Answers given by the interviews were then used as a basis to survey the usage of mobile devices and the usage of different kinds of apps. An investigation of different apps with the potential to be used by professionals in the building industry has been carried through. Apps which manage such things as scanning documents, measuring distances and handle communication.

The accident frequency in the construction industry has shown a downward trend every year but this trend was broken 2010th. It is often lack of precautionary measures within work environment and safety that is the cause of accidents. The big construction companies understand the importance of precautionary measures within work environment and safety, as they spend a lot of money and time on that matter. By examining the work environment and the safety of the small construction companies you can see how they work. The report will presents how these small companies work with work environment and safety, and also how they follow the safety instructions that are available and how they make use of safety equipment.

Objective: To investigate the experiences of ambulance nurses when using Boussignac CPAPcompared to their previous model, and their suggestions for possible improvements in the use of CPAP in the care of patients with pulmonary oedema. Method: A qualitative study with a descriptive and exploratory approach. Data was collected through ten semi-structured interviews with ambulance nurses, seven men and three women. The analysis was conducted using Lundman and Graneheim?s content analysis.

Female growth, number of eggs and egg growth of Daphnia pulex were studied at four temperatures, 12, 16, 18 and 20°C. I hypothesized that female growth and number of eggs would be lower and the size of the eggs larger in the presence of a predator (kairomones) than in its absence. This effect was expected to be more evident at lower temperatures. I could not find any effect of kairomones on female growth, number of eggs or egg size, although there was a weak tendency for an effect on number of eggs. There was, however, an effect of temperature, regardless of predator treatment (i.

This report describes what wireless local area networks are and the use and configuration of them. These WLAN as they also are called can be used both in new installations and expansion of existing networks. Further on this report reveals security in this area. Security is incredible important in all networks not at least wireless because you don?t have to be in the environment physically to get the information, you only have to be in the coverage area that can be several hundred meters.

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

The aim of this study was to establish knowledge about the most suitable substrate for cultivating different kinds of anaerobic beer spoilage bacteria in the brewing industry. During the study, two other aspects were investigated; if the sample volume affects the results and which anaerobic beer spoilage bacteria are present in the micro flora at the brewery. The method used was standard cultivation with four different substrates; Universal Beer Agar, Nachweismedium Bierschädliche Bakterien, Raka Ray and VLB S7-S. During the identification of bacteria in the micro flora, a method using PCR was used. None of the substrates showed a significant advantage over the others.

The aim of this report has been to investigate the use of electricity energy before and after a conversion of foodservice. The ambition was also to highlight the food safety and the retention of nutrients in relation to the conversion. The methods being used were qualitative interviews, case studies, study visits and literature. The equipment and the use of energy was the same in 2008 as in 2011 for hot-holding of the tested component, sauce with ham. The chilled system used more than three times the energy and cost for one portion than one portion in the hot-hold system.

Formulation and testing of a new type of chainsaw lubricantThe company Agro Oil has come up with the idea of developing an environmentally adapted chainsaw lubricant with a new unusual base fluid. A field test with a tree-harvester shows unsatisfactory low temperature properties and high wear. In this work the viscosity, price and pour point of different combinations of the given base fluid and three other base fluids have been investigated. Desired viscosity and price are determined for different formulations. The new lubricants tested show lower pour points than almost all products on the Swedish market.A test equipment has been developed to investigate the wear.