Sökresultat:
2981 Uppsatser om Domestic production - Sida 6 av 199
Bakteriell produktion i humösa istäckta sjöar i norra Sverige
The main purposes of this study were to 1) quantify bacterial production in winter during ice conditions, and 2) to compare these production measures with values measured from summer and open water conditions in three humic lakes situated in northern Sweden. Another purpose of this study was to 3) examine whether clear-cutting significantly affected bacterial production or water chemistry in two lakes situated in catchments were a large part of the forest had been removed through logging compared to an undisturbed reference lake. In winter (March/April 2014), the bacterial production ranged from 0, 7 - 2, 2 µgC/L/day and in the summer of 2013 the production values was 4 ? 10 times higher. The main reason for lower bacterial production in winter was ascribed to lower water temperatures as well as to older and more recalcitrant DOC, as there were no significant differences in total dissolved nitrogen or DOC concentration or -quality, that could explain a lower production compared to summer.
Principen mot rättsmissbruk inom det svenska mervärdesskatteområdet: är det hållbart?
The VAT Directive (2006/112/EC) does not regulate Member States? opportunities to intervene against tax evasion. The European Court of Justice has clarified the situation in case C-255/02 Halifax. This case establish that the universal principle against the abuse of rights applies to VAT, which means that Member States have the opportunity to redefine transactions not involving a breach of law but nevertheless goes past what the legislature envisaged at the introduction of the provision.A debate has risen as to whether the principle against the abuse of rights is equally ap-plicable in Swedish domestic law on VAT. The administrative court of appeal in Go-thenburg, Case No.
I skuggan av våldet : En kvalitativ studie om stödet till barn som bevittnat våld i nära relationer
The aim of this study is to examine which support the communities in Kalmar have to offer children who have witnessed domestic violence. The study also includes how social services justify this actions based on the childs needs. The study includes six respondents; four socialworkers, one head of unit at ?Alternativ till våld? and one manager at ?Barnahuset? in Kalmar. The method used in this study is a qualitative research approach with semi-structured interviews. The study concludes that children who have witnessed domestic violence seldom are known by social services, but when a child is recognized the social service use ?Alternativ Till Våld? or a general support. It also reveals that those children often have a lower priority when weighed against children who has been abused..
Europeisk fusionskontroll : på olika villkor
The decision of the European Commission to block the merger between Volvo and Scania in the late 90?s became the starting point to the debate of the possible discriminating effects of the European merger regulation. Especially since the Commission a few years earlier had approved of the merger between Mercedes-Benz and Kässbohrer on the German bus market, where the conditions for competition had been similar to those at hand in the Swedish case. The issue that was and still is in focus is whether the European merger regulation is more difficult to pass for large companies situated on a smaller domestic market than is the case for their competitors of corresponding size but situated on a larger domestic market.This thesis aims at examining what the judgement of the geographical relevant market means for the application of the Merger act. This is being done from two perspectives.
Hälsobeteende bland sjuksköterskor och undersköterskor : En studie om oregelbundna arbetstider på Ålands hälso- och sjukvård
In our everyday life we are faced with many choices that have consequences on the environment. One of these is the food we choose to eat since food production has a big impact on the environment. In organic production the aim is to have a natural production process, where environmental impacts are minimized. By choosing organic food it is therefore possible to contribute to a better environment. A large number of meals are served every day in the public sector, which makes it an important player in the consumer sector that could make a major difference for the environment..
Till framtida utvecklare
The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..
Betalningsmodeller för det svenska elnätet : Vilken modell kommer att fungera bäst för konsumenten?
Recent years there has been discussed how the critical situation in the housing market threatens the Stockholm region's growth. The thesis objective is to examine whether there is a scientific link between the lack of housing supply and growth. The thesis also intends to identify solutions for increased housing construction, for instance by examining the conditions for a greater regional perspective and influence on the region's housing supply. The thesis empirical study is based on semi-structured interviews with representatives from the Government, municipalities and the housing industry.In Sweden, research on the relationship between housing shortages and growth has not been conducted to that extent it can be said to exist scientific evidence regarding the growth threat. However, in Britain and the U.S, empirical studies show that a lack of housing supply has hindered growth through negative impact on countries' gross domestic product.
Kostnadsuppföljning avproduktionskalkyler
Calculations are an important part of planning around a construction project. From concept to completion of the project calculation is a tool to try to predict the actual cost. During the production stage in particular, deviations occur which makes the actual cost different from the calculations.This thesis is done in collaboration with JM Residential Stockholm. The study includes a cost follow-up in which a comparison was made between the calculated production cost and actual cost for the five projects. The aim of the study was to observe the most common reasons that a project deviates from the calculated production cost and then summing these causes in a number of categories.
Före och efter Trappan-modellen : En pilotstudie om psykiska, emotionella och beteendemässiga förändringar hos barn som upplevt pappas våld mot mamma
The Trappan Model is one of the most implemented treatment programs for children who have experienced domestic violence. This study undertakes a wider evaluation of the model through a pilot study. The approach is both quantitive and qualitative. Theory as well as the Strengths and Difficulties Questionnaire have been used to fulfil the aim. The design is pre-post.
Possibilities for, and attitudes towards, a potential reintroduction of wild forest reindeer Rangifer tarandus fennicus Lönn. to parts of Sweden.
AbstractThe wild forest reindeer is a subspecies of the reindeer. Wild forest reindeer earlier had awide distribution range in Sweden, but it was extinct in the middle of the 19:th centurybecause of extensive hunting. In Finland, the w.f.reindeer was extinct a few decades later bysimilar reasons. Later they migrated back to the eastern parts of Finland in the middle of the20: th century. Around 1980, the w.f.reindeer was actively rentroduced to western Finland,and there the population has had a positive development.
Hybridlärkens tillväxt i Snogeholm : hur påverkas produktionen i blandbestånd jämfört med trädslagsrena bestånd?
The hybrid larch (Larix x eurolepis Henry) is a fast growing tree species and was introduced in Sweden for about 50 years ago. The high growth and expected resistance to diseases are probably the main reasons of introducing the tree species into the Swedish forests.
The purpose of this thesis was to document the production of hybrid larch planted in the Snogeholm landscape laboratory and to compare the production in the pure hybrid larch stand with the mixture together with pedunculate oak (Quercus robur).
The data collection in Snogeholm since the establishment has been carried out by the Swedish University of Agricultural Science (SLU). The fieldwork for the thesis was carried out in 3 stands, containing hybrid larch, pedunculate oak and a mixture of hybrid larch and pedunculate oak, in order to be able to compare the total stand production of the areas.
The results show that the total production of hybrid larch in the mixed stand only is 35 % compared with the total production of hybrid larch in the pure stand. Therefore, the hypothesis that the total production of hybrid larch is equal to the planted mixture with pedunculate oak was rejected.
The other hypothesis that the total production of a 2 hectare large stand containing a mixture of hybrid larch and pedunculate oak would be greater than the total production of two pure stands of 1 hectare containing hybrid larch and oak each was also rejected. In the studied case the total production was 45 % greater if hybrid larch and pedunculate oak was planted in pure stands.
The results from the case-study only indicate that the total production of hybrid larch and oak under the investigated conditions can be higher when planting the two species in pure stands compared with a mixture of the two species.
Framgångsfaktorer och hinder med Lean produktion i Kina
AbstractLean production has become one common concept within industries to make the work more effective and to meet today?s hard competition. A challenge for Chinese production is the threat from new low cost countries. It will become very difficult to succeed to produce to a lower cost than these countries; this led to that Chinese companies must develop new strategies, according to Lee and Zhou (2000). This will put China in front of new challenges and new strategies can be needed to retain their strong competitive advantages.
Solvärme för en skola i Lerum. Studier av olika systemalternativ.
Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.
Implementering av Lean genom TAK och SMED
This graduation work is a result of implementing Lean Production using OEE and SMED at Enics Sweden AB in Malmö. Enics doesn?t have an established improvement concept and therefore should this work serve as an introduction to possibly start with Lean Production. A result in this report is that an OEE value has been identified within a common order at Enics. Other results are that an implementation of a Lean-board has been implemented and furthermore, within SMED, a flag that indicates changeover..
Förbättring av utnyttjandegrad i robotcell
When a company in the manufactory industry makes costly investments, it's important that these are used as much as possible. The company in this case claims that their invested robot cell, with CNC machine isn't used enough. The questions here are: How can we improve the use of the robot cell? Which products are appropriate for the production in the robot cell? As a method to come to a conclusion, an analysis has been made over the manufactured products. And also interviews with machine operators and the production management.