During the last years, producers and consumers have become increasingly aware of food safety. Foodborne illness and foodborne injury are in best case unpleasant but they can also be fatal. HACCP (Hazard Analysis Critical Control Point) is a preventative food safety system which is aimed to guarantee production of safe food free from pathogens, foreign materials and substances with potential to cause adverse health effect. In order to succeed in developing, installing, monitoring and verifying a HACCP system, there is a mix of hurdles for the company to overcome. While larger food companies meet a difficult challenge, small and medium size enterprises often feel that the hurdles are almost impossible to manage.

New high strength steels require improved cold rolling techniques. The aim of this degree project was to develop a new and money saving cold rolling technique to manufacture steel strip for saw blades. The work is based on earlier rolling experiments made with a high carbon steel grade at LuCoil Steel AB. The work also focused on the mill requirements to cold roll high strength steels. The results show that LuCoil?s existing cold rolling mill was actually designed for rolling low carbon steel.

In this degree project a study of the importance of a graphic identity to companies has been done. A questionnaire among small companies in Dalarna has beenmade. From this, three sets of graphic profile-program have been formed andthese are suitable for new companies. Finally a practical application has been made on Greenfield in Mora, a graphic profile has been designed.To cause an identity is to prove that someone or something exists by individualizingand distinguish. Every individual or company has its qualities or charasteristics.The way to a desirable identity is going by a corporate identity-program that containsthe companies strategies, people, products, buildings, trademarks, graphic design.

This thesis investigates techniques for stealth hydroacoustic communication using spread spectrum. The Swedish naval defense organisations have a vision that all their units should be able to communicate with each other, even between underwater vehicles. But the properties of water makes it a complex channel to use for wireless communications. Radiomagnetic waves have very limited range in water, therefore acoustic waves are used. In this report the basics of wireless communication systems are described including source coding, channel coding, modulation techniques as well as different techniques for spread spectrum.

The aim of this thesis is to study the teaching methods that provide the greatest learning effect for children in grades 6 in the subject of physics. One class was divided into three equal groups, each group was educated in a specific way. The three teaching methods that have been investigated are: film with reflection, laboratory work and traditional lecture- teaching. The research question of the study is: "Which method of three selected, causes the greatest understanding of the properties of air??.

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

Driveability analysis of terrain data offers an important technique for decision support for all kinds of movements in the terrain. The work described in this report uses a high resolution digital terrain model generated from the laser radar data and further processed by the Category Viewer program, and information from the Real Estate Map. Properties of features found in a filtering process are calculated and compared with a set of rules in a knowledge base to get a driveability cost. This cost is then visualized in a graphical user interface. An evaluation of what driveability is and what it is affected by is performed, and a general cost function is developed, which can be used even if not all relevant information is available.

Zero knowledge protocols is a lesser known type of protocol that can be used for identification. These protocols are especially designed not to reveal any information during an identification process that can be misused later on, neither by the one who should be convinced of the identity of the user, nor by anyone else that is eavesdropping. Many of these protocols are also especially designed for implementation in smart cards. The more common type of card with a magnetic stripe has during the last few years become more susceptible to attacks since they are easily copied. Smart cards combined with a secure identification protocol has been predicted to be the solution to this problem.

The purpose of this thesis is to investigate the status of Swedish real estate companies in terms of financial health and risk of financial distress. The background is the ongoing financial crisis, which partly can be derived from the American real estate sector. Publicly available accounting information from 16 listed real estate companies has been analyzed for a period of one year using financial ratios covering both the operational and financial activities. We find that the deceleration in the economy and in the real estate sector have forced the real estate companies to make large write downs, in line with the relatively new accounting rules, IFRS. Write downs are likely to reoccur during the following periods and real estate companies will therefore probably be forced to continue to show negative results.

The concentration of acute phase proteins in serum is altered as a response to inflammation, infection or trauma. this makes these proteins potential biomarkers of unspecific pathological processes. In cattle, haptoglobin and serum amyloid A are the two acute phase proteins that show the largest increase in serum concentration as a result of inflammatory processes. The haptoglobin concentration has been shown to correlate to clinical signs as well as inflammatory processes found at post mortem examination. This feature could be useful prognosis of the individual as well as for monitoring the health status of a herd or identifying carcasses that shold be examined closer at the slaughter-house.

Denna rapport presenterar det examensarbete som gjorts i samarbete med företaget Artimplant. Syftet med arbetet är att ta fram en prototyp av ett meniskimplantat i trikåteknik. Det kräver stickning av en given form och att prototypen ska inneha vissa egenskaper.Ämnesområden som berörs under arbetets gång är textiltillverkning med inriktning mot väfttrikå samt medicinsk textil. Förutom textila ämnesområden tas även ämnen som knäledens anatomi och meniskens uppbyggnad, funktion och skador upp. Kunskaper inom dessa områden krävs för att på bästa sätt ta fram prototyper av meniskimplantat.Att sticka det triangulära tvärsnittet och den böjda formen som krävs för ett meniskimplantat har varit ett arbete som pågått under hela projektet.

Theft without break-ins has increased significantly in the last year of swimming, sports and leisure facilities in Karlskrona, more precisely 60%. Vandalism in the shape of graffiti is another common crime. The solutions are divided into social and situational crime prevention. Social crime prevention engage in actions that are based on social causes of crime rather than the opposite situational crime prevention, which instead assumes that discourage with the help of technical solutions and has as primary objective to hinder accessibility for example theft friendly goods. The main purpose of this work is to come up with solutions to prevent these crimes, while also being cost-effective and realistic to implement.

The development of IT systems is usually accomplished by some form of system development methodology. It can be performed as the waterfall method, where each phase is completed before the next begins. One of the reasons to follow a development methodology is that the process is more structured, faster and that the product will have higher quality. One risk of not using a system development approach is that the code can be unstructured and difficult to maintain.This paper describes an alternative method in which the development occurred without the use of any system development methodology. This has been possible because there was a clear goal of the program that should be developed.

AbstractProblem: This thesis was made by a commission from Svensk Logistikanalys AB (SLA). SLA is a relatively new firm who is working as a freight broker for firms that wants to lower their freight costs. SLA contacted Jönköpings international business school because they experienced a problem with too many firms, that had SLA?s concept introduced to them, but turned down their services. On the basis of this, following purpose of the report has been stated.Purpose: In this thesis we will study companies that have said no to the services of SLA.

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.