Syftet med detta examensarbete har varit att genomföra en nulägesanalys av Hall 7 på Sapa Heat Transfer AB i Finspång. Utifrån nulägesanalysen togs åtgärdsförslag fram som kan generera en effektivare uppvärmning, mindre yttre utsläpp och behagligare arbetsklimat. Problemet i Hall 7 är att processventilationen för varmvalsverk 2051 är ålderstigen och underdimensionerad, den saknar även värmeåtervinning och rening av processfrånluften. Detta leder till oplanerade driftstopp, höga underhållskostnader samt hög energianvändning.För att finna åtgärdsförslag för dessa problem genomfördes en nulägesanalys av Hall 7 genom att mäta luftflöden och temperaturer, analysera utsläppsmätningar och energianvändning samt intervjua personal.Utifrån dessa mätningar har fyra olika åtgärdsförslag tagits fram. De fyra åtgärdsförslagen är benämns: YIT, YIT (Enklare), Homehall och Ökad tilluft.Det åtgärdsförslag som anses vara bäst lämpat för att generera en effektivare uppvärmning, ge mindre yttre utsläpp samt ett behagligare arbetsklimat i Hall 7 är åtgärdsförslag Homehall.

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

Abstract Background: In 1997 the Kyoto Protocol was signed, it?s an international agreement which is aimed to reduce greenhouse gas emissions. Sweden's goal is to reduce energy using in buildings with 20 percent by 2020 and 50 percent by 2050. This is a comparison with levels from 1995 (Glad, 2006). For Sweden to be able to reach its goals, they need to construct more low-energy buildings (Åhman, Wahlström & Lundblad, 2010).

Each year, the coffee machines at Ericsson in Kista produce around 100 tons of ground coffee waste.The companies Coor Service Management, Löfbergs Lila and Selecta are all responsible for differentstages in the logistical chain in delivering coffee and, together with Ericsson, they want to increasetheir environmental benefit. The plan is to produce biogas through anaerobic digestion instead ofincinerating the coffee waste in a heating plant. The results are to be presented as different businesscases in which different biogas plants are compared with the reference case (heating plant),comparing costs and environmental impacts.There are two major environmental benefits from producing biogas; reduced carbon dioxideemissions from when fossile fule is replaced by carbon neutral biogas, and reduced emissions fromreturning digestate from the bio reactor to farmland instead of using industrial fertelizer.In order to determine the biogas potential in coffee waste, a couple of properties had to bedetermined in a laboratory. Properties such as the dry substance content, heating value, moisturecontent and ash content. The results show that 100 tons coffee waste could produce around 16 500Nm3 biogas which would contain 163 MWh.The biogas reactor and upgrade plant both need energy gas to function and uses around 14 MWh ofthe produced gas.

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material. If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.

During the past 30 years the fuels for energy production in heating and power plants have changed. Fossil fuels have decreased in usage whereas bio fuels in Sweden have increased with 60% since the 1970's. Different fuels affects combustion and the release of various substances and particles into the flue gas. This is caused by the diverse components and chemical structures of fossil fuels and bio fuels. When the flue gas leave the combustion chamber and enters the path to the chimney particles in the gas are being transported out of the combustion chamber.

A patient simulator for testing anaesthesia machines has been developed at Maquet Critical Care AB, to reduce costly and time-consuming experiments on animals. The device simulates human lungs regarding lung dynamics and volume, uptake of anaesthetic agents and the production of carbon dioxide, heat and moisture. Further demands on the simulator are durability and size; the device shall be compact enough to be moveable.The resulting simulator fulfils the requirements and enables better repeatability and ability to test extreme cases than experiments on animals do.Uptake of the anaesthetic agent is achieved in a active carbon filter and controlled by regulating the flow. The flow is created by a regenerative blower and controlled using a proportional valve. The uptake can be set by the user or by a simple uptake model modified to recursively handle changes in the concentration of anaesthetic agent.Carbon dioxide is fed into the system from a tank by a mass flow regulator.

The housing sector uses 40 % of the energy in Sweden and half of the electricity usage. Theuse of energy is the main reason to the increasing rate of carbon dioxide in the atmosphere.This is the main motive but also a wish of higher safety, that is a higher rate of selfsufficientenergy production in Sweden, we want to decrease the need of using fossil fuel. Now whenthe energy price rise, the interest in energy issues increase and more people discuss thepossibility of reducing the usage of fossil fuel. A change to renewable energy such as sun,wind and water is the only solution where we can get a sustainable development.One way to contribute to a better use of energy is to build in the principle of passive house.The house is being built with a thick and tight insulation. If you use a heat-exchanger withhigh degree of efficiency and a final heating battery on the ventilation system, the heat fromlamps, devices and the ones living in the house should be enough to fulfil the criteria ofliving.

An Internet application, VEDAIR, for estimation of air quality in regions with small-scale combustion of bio fuel has been developed by Swedish Meteorological and Hydrological Institute with financing from Swedish Energy Agency and Swedish Environmental Protection Agency. The model contains user interface and a coupled model concept where concentrations of atmospheric pollutions are calculated for regional, urban and local contributions. In this report the model is described and a first study of air quality considering PM10 (particles with a diameter less than 10 µm) in two Swedish municipalities, Vänersborg and Gnosjö, is introduced.According to the result, there are areas with poor air quality even in smaller Swedish municipalities, mostly due to high emission from buildings with older wood heating furnace without hydraulic accumulator.In Vänersborg three areas were analysed in VEDAIR for the year 2003: Vargön, Mariedal and the downtown district. In the whole municipality the upper evaluation threshold for PM10, which is defined as 14 µg/m3 for annual average, was exceeded due to background contribution of particles. In all areas, however, the concentrations of PM10 were less than the environmental quality norms.

SammanfattningEn ånganna monterades i EGR (Exhaust Gas Recirculation) slingan på en 12,7 liters Scania Euro V motor (DC1306). En modell som beskriver Rankine cykel togs fram med vatten som köldmedium i simuleringsverktyget GT-Power. Ångpannan i GT-power modellen kalibrerades m.h.a experimentell data.Simuleringarna visade att det optimala ångtrycket, det trycket där högst effekt kan erhållas från expandern, är beroende av EGR temperaturen. Det innebär att ju högre EGR inloppstemperatur desto högre optimalt ångtryck. EGR temperaturen i punkt 2 i ESC cykeln är 514? C för denna motor, vilket resulterar i ett optimalt tryck på 120 bar enligt simuleringen.

According to the Board of Forestry, in Västerbotten, many natural regenerations of Scots pine (Pinus sylvestris) carried out on privately owned forest in the middle of 1990 in Västerbotten have rendered a bad regeneration outcome and will provide a low future forest production. The Board of Forestry believes that the negative result can be explained by the fact that the regeneration has been carried out in wrong locations and that scarification failed to work as planned. In order for an accepted rate of regeneration the guidelines of the Forrest Act require, not less than 10 years after final cutting at natural regeneration, that there should be at least 1300 (site indices 16 m) - 1700 (site indices 20 m) main crop stems per hectare. Main crop stems are defined as stems according to the place of growth and appropriate tree type, in addition with regard to quality, stage of development and damage risk have a prospect of succeeding. In addition main crop stems should be separated by surface so that the proportion sample plots with 3 meters radius, and lack main crop stems, are not more than 10 % of site indices 14 meters or higher.

In the beginning of the 1860s, an important railway was built between Malmö and Stockholm. The railway became one of the most important projects that would influence the entire southern Sweden. The railway line was located to areas outside the ordinary routes and a number of communities were built up along its way.Älmhult was one of the communities that was built up due to the railway. In the beginning there were only a few farms and a station, but a community developed and the village grew. In 1901 the village became a small market town, which was an important event.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

In developing countries such as Vietnam the population consumes more animal products for example milk and meat than before which requires greater livestock production. Ruminants contributes to more methane emission which creates a dilemma between food production and its environmental impact. By feeding ruminants with nutritive crops which humans can not assimilate the animal performance will increase in terms of better growth and milk production without inpinging on food that can be consumed directly by humans. Increasing animal performance reduces methane emission in terms of amount of methane in kg-1 milk and meat which today is much greater in developing countries than developed countries. The aim of the study was to investigate tropical tannin-rich legumes for their potential as a feed supplement for ruminants made in vitro.