This report will examine various solar energy technologies in order to decide if they could be applied in the Royal Seaport. The Royal Seaport is a Swedish urban district under development in Stockholm, with the goal of becoming a sustainable district. Two main techniques, solar collectors and solar cells, including sub-categories, are addressed in this report. Another sub-category, a hybrid system, will also be mentioned. The main difference between solar collectors and solar cells is the type of energy produced by the system.

The aim of this study has been to discuss ideas of knowledge within classification theory and subject analysis in the light of theories of fundamental changes in the production of scientific knowledge. Guiding questions have been: How have the conditions of knowledge production changed? How has interdisciplinarity as part of this development evolved? What assumptions lie behind theories of classification and subject analysis? How do these stand in relation to the alleged changes in the production and understanding of science? Three works about the changing conditions for knowledge production and the growth of crossdisciplinarity have been presented and discussed. These works stress the loosening up of boundaries between traditional knowledge domains and open up for discussions about how to organize knowledge production in the light of these changes. In the study it is argued that their works also could open up for discussions about the way knowledge is organized for retrieval purposes.

The aim of this report was to investigate the economy of passive houses. The work was focused on economy in total and on the economy of different components such as windows, insulation, heat exchanger and the air tightness of the climate shell. No attention was paid on the comfort factor or to the impacts on the environment.Two houses, aspiring to be passive were chosen; A big one and a small one. Hence, comparisons considering the size of the building have been possible to do as well.The comparisons were made by calculating ?break even? between two concepts; passive and BBR- concept.

The countries in the European Union have agreed to increase their percentage renewable energy sources to 20 %. To reach this goal an increase of biomass production needs to be made. One way of achieving this is by using nonnative species. Poplar in Sweden produces biomass faster than the domestic trees. In the southern parts of Sweden plantations has been made with good results. In the northern parts survival is a problem that needs to be solved before plantations can be made for commercial use.

This diploma work addresses the question of how much energy is spent whenmanufacturing the components of a building as well as of how much energy is used inthe production of a building. The object of the studies is BioCentrum at the SwedishUniversity of Agricultural Sciences in Ultuna just outside the city of Uppsala. The aimof the work was to investigate how much energy was consumed when manufacturingand production in relation to the management, how many years the production wasrepresented. It was also a study in how mature the construction industry is to answerhow much energy was consumed in manufacturing.In order to get these answers a question form was developed and sent to thesuppliers to BioCentrum. In this form they were to respond to the quantity suppliedto BioCentrum and the amount of energy was spent when manufacturing thecomponents.

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

Background: Since the coining of the phrase lean production by Womack, Jones and Roos in 1990, this mass production system of Japanese origin has been implemented in a multitude of organizations throughout the world, the results being predominantly positive from a financial point of view. The possibly negative effects of mass production on worker motivation have been discussed since quality of work life became an important political issue in Sweden in the 1970?s. As the popularity of lean service is now increasing, there are still unresolved issues regarding the transferability of a mass production system to the service industry, particularly with regards to the motivation of service employees.Purpose: The purpose of our thesis is to study the lean system of a Swedish bank, SEB Way, from a management- as well as an employee perspective in order to describe how lean may affect the work motivation of service employees.Research procedure: The study is empirically based on observations and interviews on multiple hierarchical levels at SEB. We have conducted a total of 13 interviews with front line employees at SEB, with the central SEB Way team as well as two external lean specialists.Results: The study indicates that SEB Way has little direct influence on the intrinsic work motivation of the SEB front line employees, as work motivation was present prior to the implementation of lean.

The avowed aim in this project was to see how the Swedish egg production is today. My first question was if the Swedish egg producers egg production turn a profit. I have done five after calculation at five different egg producers with different systems from case to case. The difference has been the living system, the fodder and the egg price. They made a report in Uppsala, Sweden (Hoffman & Andersson, 1996), where the look forward to a Swedish cage ban and made calculations after that coming ban. After that they lift the Swedish ban of cages and the egg producers could invest in new cages who called the decorated cage.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

The aim of this study was to investigate the production of knowledge that can emerge in the use of Practice Research by Mirror method. This by finding out what it is in the practical work that leads to the production of knowledge and how knowledge production takes form. The empirical data that form the basis for this study is recorded group within the Mirror method discussions and a focus group interview with social workers who participated in the discussions. Those who have participated are social workers with experience from working with financial aid support and only real cases have been used in the discussions. The results have been analyzed according to Lipsky's theory of street-level bureaucracy and their discretion and Fook and Gardner´s theory of critical reflection.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

Purpose: Exploring the relatively new technology of convolution reverb, to gather knowledge on its limitations when used practically in the production of pop music, and from these findings to learn about applications in other performing arts and sound design. Methodology: This is a case study of creating convolution reverb by doing impulse responses (IR) and then applying them to studio recorded pop music. The empirical data consists of the final song results, notes and journals from during the process and the comparisons, as well as established litterature on acoustics, psycho-acoustics and music production. Results: Convolution reverb can widely and freely be used in the production of music and other audio-based art forms, since our study shows that the result of a well-made impulse response from a particular room is indistinguishable from music that is actually played and recorded in the same space..

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

This thesis project has focused on studying ÅF?s business concept Energy Collaboration, which is their way of selling energy efficiency services. Thereforeongoing projects have been analyzed. The purpose was to determine achieved energy efficiency, costs and profitability for the studied projects. It was concluded that the Energy Collaboration is a good way of selling energy efficiency services, since the customer takes no risk and energy savings of about 15-25 % can be achieved with simple measures.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.