Findus Sverige AB, referred to asFindus from now on, harvests peas during a period ofaround 50 days during the summer. The harvest generates about 30 000 tonnes of peas which gives around 40 000 pallets to distribute to the warehouses which Findus uses for final storage. Three hours after the peas are picked in the fields, they have to be frozen to keep their good taste and quality. Because of this the pallets are marked with a preliminary label with quality classification of the content. The Findus quality department then has one day to determine the correct quality of each pallet.

Målet med examensarbetet var att ta fram ett koncept för automatiserad i- och urmatning av stänger till en gängmaskin. Målet var också att 3D-modellera och göra 2D-ritningar på samtliga ingående mekaniska delar samt att genomföra en styrteknisk studie.Arbetet har utförts på uppdrag av Lars Eriksson och Annika Persson på Ground Machinery Applications AB i Sunne. De krav som ställdes på konstruktionen var enkelhet att montera och demontera, att man enkelt ska kunna byta ut komponenter som utsätts för slitage. Det skall finnas möjlighet att montera skyddskåpor där klämrisk kan uppstå. Krav på att stången skall hållas på plats av ett mothåll under gängningen samt att konstruktionen skall utföra så få och enkla rörelser som möjligt.

Rapid development in the realms of electronic publishing has had a profound impact on information services in general and the academic library in particular. Since mid 1990´s an increasingly number of scholarly journals and other information resources have been made available electronically. Electronic books are the newest electronic service in the hybrid library and can be seen as the third wave in the digital library. Although electronic books have for a long time existed as electronic texts such as digitalized classics or other texts in the public domain, it is not until recently that e-books have been distributed and packaged in a commercial form. As more e-book models are being developed, libraries are being forced to take e-books into consideration when planning their information services.The aim of this master thesis is to describe the first stage of implementation of the new electronic media, the electronic book or e-book, in Swedish academic libraries.

Wood has always been an important material for people, and it is used for many applications. As for example, fuel for cooking and heating houses, construction materials and for constructing means of transport. Since wood also is a material that with time biologically degrades due to activity by micro organisms and wood fungi it is important to find ways to protect and further lengthen the life span of the material when in service. One method is to decrease the amount of water in the material by impregnation with an hydrophobic oil. The Linotech method which uses only pure linseed oil is one such possible method. The aim of this study was to investigate the possibility to at the same time impregnate and stain/colour wood samples of pine and spruce by using the Linotech method.

Purpose: The purpose of the present study is to investigate whether and how nine teachers of special education for older students, primarily at Upper secondary school, consider the smartphone an appropriate pedagogical means of assistance to improve participation and to support students with special education needs within and outside the school environment. Theory: The theoretical framework for the study is the sociocultural perspective on learning. The sociocultural perspective is related to the relational perspective and sociocultural learning theory involves learning and participation in school. It views the human being as socially active within a certain historical and cultural context which actively influences the way we act, how we learn and develop through interaction with others in the social, everyday practice. The latter is of vital importance here.

This thesis work has been performed on request by SWT (Scandinavia WeldTech AB). SWT manufactures, develop and sell ready to assemble building systems for concrete rafter beam applications. The beams in this system consist of a u-beam that is welded to a flange. To be able to fill the beams with concrete there is holes in the beams top end. The holes are made in a ?punching machine?.  These holes are cut out and the remaining steel piece is bent down in the u-beam.

This report is the result of an investigation of the possibility to use RFID-technology in a producing company. The investigation is focused on a flow between the company?s producing subsidiary company in Lithuania and its main facility in Sweden.RFID is the abbreviation for radiofrequency identification. The RFID-technology forms the base of a system with wireless information transmission between an object to which a transponder, also called tag, has been attached and a reader. The information is transmitted by radio waves and the system is equipped with software that can digitalise the radio waves.

The purpose of this thesis work is to formulate a model with methods that describe key success factors to get understanding and awareness in organizational change projects. We have used a project within the township of Gothenburg as a case and connected to this single project the purpose is to identify key success factors to get understanding and awareness among employees within the township of Gothenburg. We hope that our result will be useful in other large organizational change projects. Theoretic basis for our study have been models and methods, while our purpose have been to construct a model with suitable methods for anchoring. Theories about coaching and process management are examples of methods to get understanding and awareness among employees in change projects.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

During the 20th century a significant proportion (about 15 %) of the peat-covered wetlands in Sweden were drained to improve forest productivity. Area wise, most of the forest drainage was done in northern Sweden, but relatively speaking a larger part of the wetlands have been drained in the southern parts of the country. Most often, the forest drainage resulted in increased forest growth, but failures were not unusual, and harmful effects, e.g. on species richness, have been a common cause for draining. Ditch cleaning is necessary for maintaining the ditches in good condition.

Health and convenience trends dominate the food industry and retailing business of today. The health consciousness is spreading while appealing product attributes concerning taste and packaging also are increasingly important. At the same time, the competition is growing fierce in the Swedish market with hard discount formats and niche concepts who also are trying to provide the market with perishables. Therefore, the pressure to lower prices is increasing making economies of scale and rationalization progressively more important. In 2004, ICA launched private label meat packaged in a modified atmosphere. Consequently, many stores went from in-store cutting-up and packaging to selling centrally packaged and distributed meat. ICA is now developing a concept with fresh fish in modified atmosphere packages and needs to increase the knowledge about the market and the consumer.

There are five endemic populations of migratory Atlantic salmon (Salmo salar, Salmonidae) and brown trout (Salmo trutta, Salmonidae) remaining in Lake Vänern, whereof two are salmon and three are trout. There is one population of each species in Klarälven, also one of each in Gullspångsälven and there is a population of trout still remaining in Tidan River. Since the beginning of the 20th century endemic populations of salmon and trout have either vanished or declined dramatically due to the construction of hydropower in the rivers around the lake, and still today the future of the remaining populations remains uncertain. To manage salmonid fishes effectively more knowledge of their ecology throughout their different life-stages is needed. A large part of the Lake Vänern salmonoids lives are spent in the lake, where a mayor mortality factor is recreational fishing, especially angling.

Today?s electrical grid companies understand that better knowledge of and information about their grid can help realize a smart grid network. One way to gain better knowledge and information about the low voltage network is to install measuring equipment on the substation transformer´s secondary low voltage side that measures the low voltage network losses for that specific substation. By doing so, grid companies can, due to the calculation of the low voltage network losses, identify and address issues such as illegal power dissipation, unmeasured power outtakes, and unsatisfied technical documentation for the substations low voltage network.During 2012, Mälarenergi Elnät AB had a total electrical network loss (both medium and low voltage network losses included) of three to four percent of their total distributed electrical volume. Converting this energy volume into a monetary figure this accounts for a loss of around 30 million Swedish crowns.

Wildlife is a valuable and renewable resource that promotes economical, ecological and social values. These values are important for developing and maintaining many rural societies. However, growing ungulate populations have led to increased browsing pressure on valuable forest trees and crops. Previous studies have proposed supplementary feeding and gamefields as potential methods for controlling the ungulate foraging and reducing browsing damage by providing other attractive food resources. However, quantitative estimates of potential biomass production of various gamefield crops and browsing pressure on the surrounding forest have been lacking.

In 2010, Airwatergreen AB started testing their new technology, the Airwaterwell, an atmospherical water generator of their own design that is running on solar heat, with a production capacity of three litres of water per day and m2. The purpose was to focus on foreign aid organizations as main purchasers for project investments towards rural communities in developing countries that suffer from lack of, or compromised quality of drinking water. In order to further understand if this technology would bring a positive impact in the developing countries, the company contacted the Swedish University of Agriculture for a socio-economic study of the Airwaterwells? potential. The authors elected Cost benefit analysis as the appropriate method for conducting the study and India became the study region because of its many problems with water related issues such as diseases as well as insufficient water supply for households. The regions that this study is based on are Gujarat, Haryana and Uttar Pradesh given their differences in income, health situation and poverty rate.