Sök:

Sökresultat:

9518 Uppsatser om Discrete event system simulation - Sida 49 av 635

Verifieringsplattform i SystemVerilog

Our task was to create a virtual test bench for verifying memory addresses in our commissioning body?s models. The purpose with the testbench was that it should be created in such a way that it would be easy to change the device under test without any major changes in the testbench.To solve the problem that the testbench had to be able to verify different devices we had to create a general enviroment for how the testbench had to be composed. By doing an analysis of which com-ponents that are usually included in a testbench and which components that were necessary in our project we came up with a generall enviroment for the testbench. Our result was a testbench with the follwing basic functions:* Read from a file that contains read and write operations to the Device Under Test (DUT).* Apply the stimulus to the device* Read the results from the device* Compare the results with wanted values* Generate a log file which contains information about the simulation result..

?En kärlekshistoria vi alla drömmer om?: En analys av chick lit ur ett genusteoretiskt perspektiv

The purpose of this Master?s thesis is to examine how the gender system is described in chick lit. The analysis is based upon seven chick lit novels. The primary theoretical point of departure is Yvonne Hirdman?s theory about the gender system, the hierarchical order and the separation of the sexes.

Integrering av Lantmäteriets system för fastighetsvärdering

Lantmäteriet använder idag ett verktyg för fastighetsvärdering, detta verktyg består av ett system med spridd arkitektur för att lagra fastighetsdata och geografisk information. Studien syftar till att undersöka vad det finns för alternativa tekniker och lösningar för att integrera spatialdata och fastighetsdata i samma databas. För att finna svar på detta analyseras litteratur, svar från enkäter som besvarats av slutanvändare samt resultat från djupintervjuer av systemexpter. Resultatet visar att tekniker som t.ex. ArcSDE och Oracle Spatial kan lösa det angivna problemet.

Bankers behov av redovisningsinformation vid kreditgivning

Vid utveckling av nya system finns det flera olika modeller/metoder att använda sig av, till exempel prototyping eller vattenfallsmodellen. Denna uppsats beskriver hur utvecklingen avett webbaserat system för registrering av datorer kan ske med hjälp av vattenfallsmetoden. Fokus på detta arbete ligger förutom själva utvecklandet av registret också på dokumenteringen av de olika stegen som följts enligt vattenfallsmodellen. Detta arbeteförsöker också svara på om denna modell är lämplig att använda vid utvecklingen av liknande system. Uppsatsen tar också upp fördelar och nackdelar om kan uppkomma vid användandet av denna modell..

Effektiviseringspotential inom projekt

The work is performed at Forsmark Group AB as a final step in the Bachelor ofScience program in nuclear engineering at the University of Uppsala in 2013.The work is part of an ongoing process of streamlining project system model FKA.Streamlining the project model is an important aspect that affects all largecompanies that somehow have a project governing body when there is muchfinancial resources to save. Although the quality of the projects is positivelyaffected by efficiencyThe aim is to find possible common weaknesses and strengths of the project systemby interviewing a number of project managers, and using the systems in placeexamine the model.As part of the work also includes examining what project managers have to adjust tothe newly implemented system VPMM, and other newly introduced elements thathave been added to improve the efficiency in the futureProject System is a complex system that is influenced by many different parametersand participating individuals' attitude and personality. But then small changes in themodel could have major economic consequences.The thesis has generated results that show common weaknesses among the variousprojects and their project managers' general opinions about the project model. It alsopresents some possible solutions based on own thoughts and those interviewedobjects suggestions and comments..

Förälder på olika villkor : En studie av kriminalvårdensarbete med frihetsberövade föräldrar

The aim of this study is to look into the correctional system?s work with parent ship of incarcerated mothers and fathers from a gender perspective. It is a qualitative study and two interviews have been done with employees from a prison for women and one interview from a prison for men. Two interviews have been done with two former incarcerated parents, one mother and one father. One interview has also been done with an organization which gives children with incarcerated parents support and an opportunity to meet other children in the same situation.

Energieffektivisering och analysering av inomhusklimat genom simulering : IVT Värmepumpar, Tranås

Syftet med detta examensarbete har främst varit att förbättra inomhusklimatet i byggnaden Greenhouse, tillhörande företaget IVT Värmepumpar i Tranås. De anställda upplever problem med värme i byggnadens utbildningslokaler främst under sommarhalvåret. Tid har även lagts på att ta fram åtgärder som sänker byggnadens energianvändning i form av el och värme.Då examensarbetet utfördes under hösten användes ett simuleringsprogram för att få en bild av inomhusklimatet under sommarhalvåret. En modell av byggnaden byggdes upp i simulationsprogrammet, komplett med ventilations- och värmesystem.För att validera modellen som konstruerats utfördes flertalet mätningar under en veckas tid. Simuleringsmodellen kalibrerades sedan mot dessa mätningar för att efterlikna de verkliga förhållandena i så stor mån som möjligt.

Manligt och kvinnligt missbruk - Livshistorier om vägen in, tiden under och vägen ut ur missbruk.

Alcohol and drug abuse is something that undoubtedly exists in our society today. Our interest in this area was inspired by an earlier study of the influence of socialization on these dependencies. From this we developed new hypotheses concerning men and women?s drug and alcohol abuse. The main purpose of this study was to highlight the experiences and reflections of six women and seven men on their own alcohol or drug abuse.

Modellering och simulering av hydraulik för användning i hardware-in-the-loop

Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

Konsulters arbete vid en ERP-implementation med fokus på användarna och de organisatoriska fördelarna

När organisationer implementerar ett nytt ERP-systemligger deras intresse påkonkurrensfördelar och ekonomiska vinster. Det fokuseras på vilka fördelar systemet kan georganisationeni form av snabbare ledtider, reducerade kostnader, bättre beslutsstöd och resursöversikt. Dessa konkreta fördelar ärävenlättare att hålla koll på och att mäta. Svårigheter finns i att hantera fördelar som systemet kan ge användarna. Implementation av ett nytt, verksamhetsövergripande, ERP-system kan påverka kärnprocesser, arbetsmönster och uppgifter.

Utveckling av en ljudsimulator med anva?ndarcentrerad design : Tilla?mpad matematik fo?r ba?ttre konsertupplevelse

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

ConneXion : Konstruktion och produktutveckling utav proteskoppling

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

Automatisk genreklassifikation : en experimentell studie

This thesis aims at examining to what extent a few, algorithmically very easily extractable document features can be used to classify electronic documents according to genre. A set of experiments is therefore carried out, using only 11 such simple features in an attempt to classify 84 documents belonging to electronic academic journals into three manually identified genres: table of contents, article, and review. The 11 features are also divided into three sets, containing metrics of words and sentences; punctuation marks; and URL links, respectively. The performance when using these sets of features is then measured with regard to classification accuracy, using a k-NN classifier, four different values of k (1, 3, 5, 7), and both leave-one-out and 10-fold cross-validation. Best results are achieved when using all three feature sets (i.e.

Inköpsoptimering och kostnadsreducering

This thesis has been carried out at Diac Metal AB at Torsvik outside of Jönköping. The company produces parts for, amongst others, office furniture and store equipment. The essay will be concentrated on one detail which is included in many of their products.Today the company uses an ordering quantity based on experience which is rarely updated. Furthermore the operations are performed in both the company?s own engineering workshop but also an external workshop.The purpose with the report has been to check whether an updating of today?s batch shaping and ordering system can mean simpler storage control and possibly cost reduction.

Tidsstudie av containerhuggbil

The fork lifter chipper truck is a concept which has been developed for harvest and transport of bio fuel. The system consists of one fork lifter chipper truck and 1, 2 or 3 transport lorries, usually two, which serves the fork lifter chipper truck. The system is driven by the fork lifter chipper truck that produces chipped material into a container on the truck. When the container has been filled the truck drives to the landing site where it?s offloaded.

<- Föregående sida 49 Nästa sida ->