Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

This thesis is written on behalf of Skanska, Väg- och Anläggning Stockholm Mälardalen, vid Nya Karolinska Sjukhuset i Solna, NKS. The report has resulted in recommendations for the method of soil stabilizations of soil nailing, excavation of slope and fiber reinforced shotcrete, which is the most suitable method from a safety and a cost point at the NKS.The aim of this thesis was to investigate whether fiber reinforced shotcrete increases slope stability, with the focus being on the total stability. The main goal was to investigate which method of soil stabilization is the most suitable for the slopes that are analyzed in this report. Through studying literature, the authors have gained an understanding about the theoretical background for the given problem. Through calculations and analyses of the slopes, safety factors have been acquired.

In the future network-based Swedish Defence (NBD), attaining information superiority will be of great importance. This will be achieved by a network of networks where decision-makers, information- and weapon-systems are linked together. As a part of the development of NBD, we have performed a study of user interface design for a future network-based tool package for analysis of sensor systems, referred to as the C2SR-system. This thesis was performed at Ericsson Microwave Systems AB, Sensor and Information Networks, during the autumn 2002. A pre-study concerning the requirements of usability, trustworthiness and functionality of a user interface for the C2SR-system was performed.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

Automationscenter & Bråvalla Elteknik AB is a company that offers the market completed total solutions where the customer can operate and monitor their production from the terminal. In these total solutions they lack standard circuit which are developed by the company and which could manoeuvre/control/monitor controlled process objects. This report defines the work of developing the most common standard circuits.The report is initiated by a short theoretical part about PLC and the PLC system, with a connected terminal, which has been used. Thereafter, the turnout of the demands of specification is reported, after discussing with the supervisor in the course of the project. The report concludes with a disclosure of how the programming, the documentation and the testing have proceeded and a final discussion concerning the project and proposals on continuation.The result is a CD with the documentation of standard circuits and how they are implemented in a new project.

Syftet med denna kvalitativa undersökning är att jag vill beskriva och analysera homosexuellas komma-ut-processer. Datainsamlingsmetoden som använts är intervjucitat med kvinnor från den skrivna litteraturen, Lesbisk identitet, Dubbelliv och Komma ut, samt livsvärldsbaserade temaintervjuer med tre av mina vänner. I intervjuerna har jag utgått från dessa olika teman; upptäckt, resans gång och dagsläge. Jag har även med ett par citat från egna erfarenheter.Mina teorier jag har använt mig av är, Fuchs Ebaughs Exitprocess, Pennebakers begrepp Disclosure och Inhibtion, jag har även använt mig av interaktion, roll- och stigma inom socialpsykologi. Jag kommer att göra ett försök till att beskriva och analysera dessa områden inom mitt ämne; komma-ut-process i sin helhet, Vad är det som påverkar kvinnornas agerande i en komma-ut-process och hur personer i det sociala nätverket involveras i en komma-ut-process.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

Building Automation Systems in commercial buildings are often designed and installed by different contractors, using equipment and components from different manufacturers. The lack of an accepted communication standard has resulted in a few different standards. Many manufacturers of building automation systems only support one, a few or none of these standards, while developing proprietary system solutions. Regin, who develop such equipment, are planning to adopt an open communication protocol specially designed for building automation - BACnet. As a step in that direction this thesis was announced with the purpose to investigate the possibility to implement BACnet in one of their products and to gain more knowledge of the BACnet protocol.

There are problems with poor quality, poor scheduling and poor working climate in the Swedish construction industry. Many parts have been involved, trying to solve the problem.This spring a new planning and building-law becomes final. In this law, the requirements set on the controls are greater. Hopefully this will lead to fewer construction errors. The requirements set on the working environment have also increased, forcing consultants and contractors to focus on safe workplaces.For each project requiring a building permit, an inspection plan has to been drawn.

I contacted the production company Salmonfox in the hope that they would have any projects that they needed help with. It showed that Salmonfox just started up an old project that they needed to complete. They wanted my help to edit some trailers and one crowdfundingfilm for the short film called, Captain Sweden (Kapten Sverige). Salmonfox are hopefully going to use the different trailers and crowdfundingfilm to promote the short film and get help with the funding to make a feature. The project began with a pilot study in which I made a time plan and a requirements plan, where the different requirements were set.

As the globalization of companies increases day by day, the need for a clear and comprehensible legislation to overcome the problems with transfer pricing transactions increases as well. Incorrect pricing in transfer pricing situations between companies with close economic ties to each other makes countries risk parts of their taxation income.Swedish legislation uses the internationally accepted arm?s length principle to regulate the transfer pricing transactions. Through the correction rule, the rule is upheld that the pricing between two companies with close economic ties to each other must apply to the same conditions as it would have been if it was between two companies without close economic ties to each other.To ensure that enough material is provided to base the assumption whether or not the correction rule has been followed or not, Swedish legislation provides a number of paragraphs to regulate the matter. The legislation is spread all over and is hard to interpret.

Frågor kring frivillig redovisningsinformation har under senare år varit av växande intresse. Missnöjet med den obligatoriska redovisningen bland investerare och andra nyckelintressenter har bidragit till att kraven på företagen att förse dessa intressenter med mer information ökat. Företag uppmuntras därför att förbättra den ekonomiska rapporteringen.Syftet med studien är att beskriva och förklara vilka faktorer som påverkar företag att lämna frivillig information i årsredovisningar.Uppsatsen bygger på kvantitativ forskningsstrategi då den syftar till att kvantifiera förekomsten av frivillig redovisningsinformation i årsredovisningar. Genom en innehållsanalys av 389 slumpmässigt utvalda aktiebolags årsredovisningar med hjälp av ett kodningsschema kvantifieras den frivilliga informationen. Denna kvantitativa information har sedan statistiskt bearbetats för att kunna bidra till att testa de uppställda hypoteserna.Börsnotering är den faktor som har störst inverkan på mängden redovisad frivillig information och den teori som är mest tillämpbar för att förklara förekomsten av frivillig redovisning är legitimitetsteorin..

The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

An environmental review has been carried out at FORIA AB, a transportation- and machine service company, to analyze the company?s environmental aspects from the transportation segment. This report describes the essential background and the methods of identifying and evaluate the environmental aspects. It also describes how the work with the environmental aspects often vary between different actors. The design of the ISO 14001 is intentionally broad in order to apply on all sorts of activities and organizations.

ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.