The purpose of this thesis work was to develop an automatic fault detection system for surveillance of bearing temperature in hydropower turbines. The parameters used except the bearing temperature were cooling water temperature and cooling water flow. A simple static model based on data sampled every minute was developed to estimate the bearing temperature. Then a detector for detection of change in bearing temperature based on the CUSUM-algorithm was designed. Since the amount of data was very small the developed model was too uncertain to be used in a working system.The designed fault detection system showed to work well for the available data.

This thesis discusses the validity of the Capital Protection Rules under the new Companies Act.The areas of particular interest and cause for debate focus on the advantages and disadvantages for creditors under the laws regarding minimum capital requirements, capital distributions, stock acquisitions, stock minimization, loan restrictions and forced liquidation.How could creditors receive better protection?What changes would have to be made to the Capital Protection Rules to provide better protection and what would be the consequences of these changes to the shareholders, the government and the creditors.Could or should we model the Norwegian or American Judicial system in this situation?Included is an in depth report on the Swedish Capital Protection Rules outlining what they are, what they entail and what the reasoning was behind them. Also included are the EU equivalents and Norwegian and American Capital Protection Rules..

The task given to us was to develop an industrial wheel with new thinking in terms of fresh design and construction, with the ability to brake. While the produced wheels of today only own the property of total braking, a wish was made to integrate the ability of directional locking.The time spent working with the project has been filled with multiple sketches of ideas and function analysis.Choices of material and ways of construction have been verified by calculations, tests and prototype building. The goal of this thesis has been to develop a unique caster with well thought-out design that would be adaptable to different areas of applications.The result was a hubless wheel with the ability of directional locking before total braking.A prototype of the wheel has been made to show the design and functions..

This report studies the possibility of using some sort of radio sender and transmitter in order to position skis lost in powder snow. It is concluded that a RF-solution on the 433 MHz frequency should be the most efficient. Different forms of directional antennas are examined and studies show that in theory the best suited is the so called ?Yagi-Uda antenna?. A solution based on using a Receive Signal Strength Indicator value together with the above mentioned directional antenna is developed.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

The purpose of this paper is to investigate the process of transferring information from science to "the field" of environmental protection in Sweden. I have studied four Swedish environmental organizations, Greenpeace Nordic, WWF Sweden, the Swedish Society for Nature Conservation and Friends of the Earth Sweden to see how they search/get information. I have also studied the Swedish Environmental Protection Agency and its role as sender of information, since it is the authority which is responsible for environmental information in Sweden. I have used information and communication theories as a help to analyse my results. While working on this paper I realized that my methods were not the best.

With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

Denna rapport handlar om Övervakning i en IT miljö som täcker både nätverk och system. Denna rapport inriktar sig på Fault Management och Performance Management..

The use of earth bricks in Scanian building traditionThe present work is concerned with the manufacturing and use of earth bricks inbuilt heritage in the south Swedish province of Scania. The first part of the studyprovides a thorough description of the traditional use and manufacturing of earthbricks based on relevant literature, archive material as well as interviews withinformants. This forms a basis for the second part of the study in which practicalexperiments on and tests with earth bricks where carried out. This involved themaking of traditional earth bricks of different composition. The new handmadebricks were compared with industrially produced bricks (extrusion bricks) and oldhandmade bricks.

The thesis demonstrates protection solutions that can be suitable for a camp during internationalmissions in order to resist complex threats. The threats could consist of small arms, machineguns,RPG 7, anti armour missiles, mortar, artillery, HPM-weapons, car bombs, biological and chemicalweapons as well as sabotage and theft. It?s not the technology itself that makes the threat scenariocomplex it?s the way the opponent acts during the operations. The opponent acts usually incivilian clothes and therefore he is difficult to distinguish from other civilians.

The purpose with this examination is to build a measureequipment to AerotechTelub AB (AT), who will registrate fault in SRAM-memory in contact with cosmic radiation. The equipment will be created around developcard from Memec Design with FPGA from Xilinx. The logic in the FPGA will be implemented with the hardwaredescribed language VHDL. The SRAM-memory that will be tested is build in CMOS-teknologi. The memorycells will be loaded with a predecided bitpattern.

Den här uppsatsen behandlar TV-serien Planet Earth ur ett ideologikritiskt perspektiv. I uppsatsen utgår jag från att även en naturdokumentär som Planet Earth är en subjektiv text vilken präglas av kulturella värderingar och ideologiska intressen. Jag granskar hur man valt att presentera naturen och djurlivet, i syfte att klarlägga de värderingar som serien speglar. Planet Earth följer vissa konventioner som finns för denna typ av produktion. Man använder sig av en berättande struktur som innebär fokus på individuella karaktärer, tydliga händelseförlopp och en applicering av gott och ont på djuren.

The consumer society exploits the earth?s resources more than the earth itself has capability to produce. This over-consumption causes a mass production of products, which mean that more greenhouse gases are being emitted to the atmosphere. This is one of the reasons why the earth?s temperature is rising, where the result of it is worldwide disasters.

Inom industrin används olika testmetoder för att uppnå hög kvalitet i mjukvarukontrollerade system. Kvalitetskraven är särskilt höga för säkerhetskritiska system t.ex. styr- och reglersystem i fordon. I det här examensarbetet används två analysmetoder (Fault Mode and Effects Analysis och Fault Tree Analysis) för att ta fram ett nytt säkerhetstest för ett broms- och växlingssystem som Scania tillverkar. Det studeras även hur formella metoder kan användas för att ytterligare öka kvalitet ochh tillförlitlighet.

This report is a description of a developed educational simulator over rail vehicles and its components. The simulator is a hardware-based prototype over a door system on rail vehi- cles. System specialists and technicians will use the prototype. The Simulator should give the user a technical demonstration on how components work in a door system. The proto- type consists of motor, switch, relay and sensor.