Sök:

Sökresultat:

1957 Uppsatser om Digital manufacturing - Sida 17 av 131

Utvärdering av kvalité och dess behov inom förprovtryck

It always has been a need for the abiltiy to create color proofs. When an error occurs late in the production process, itis allways complicated and difficult to correct the error. In this project, digital proofs been made and discussions havebeen held with several people in the printing industry, in order to examine how well excisting digital proofs, meet thedemand of the market. And how close the digital proofs can come to the actual printsheat from the press. The study hasbeen shown that the one thing that has had the most influence on the outcome for the quality of a digital proof, is theprintshop operator?s knowledge about color management and proofing systems.

Digital kompetens och Gy 2011 : -En kritisk diskursanalys

Genom en kritisk diskursanalys söker jag svaret på vilka diskurser som finns i mitt urval av dokument. Med sociokulturellt perspektiv som teoretisk grund väljer jag att titta på kunskap och lärande. Utgångspunkt för analysen är Europarådets rekommendationer inom programmet Utbildning 2010, där ett underlag gavs i form av åtta nyckelkompetenser för livslångt lärande (EU 2006a). Jag tittar på digital kompetens, som är en av nyckelkompetenserna som varje europeisk medborgare ska utveckla. Jag analyserar också dokument som finns med i processen för den reformerade svenska gymnasieskolan Gy 2011.

Modulär Mekanikstruktur för Nanosatelliter

The objective of this thesis was to present a design proposal on a modular mechanicalstructure for a nanosatellite. The size of the structure should follow the CubeSatstandards. This standard divides satellites in units (U), where 1U is equivalent to acube where sides measure 100 mm. 2U corresponds to the same volume and size as2 assembled 1U structures, and so on. The focus was to develop a structure in theorder of 3U and 6U.At the integration in the satellite launch rocket, there are a couple of differentinterfaces, where the structure is adapted to common ones; P-POD and CSD.

En digital kärlekshistoria

Kandidatarbetets syfte är att undersöka mötet mellan människa och medium genom att undersöka hur människor relaterar till och tolkar mötet med ett medium. Undersökningen tar sin utgångspunkt i flera tänkbara kunskapsfält, bland annat posthumanism, transhumanism, tolkningsvetenskap. Dessa kunskapsfält prövas sedan i en gestaltning för att avgöra om kunskapen är relevant i förhållande till vårt ärende..

Identifikation av produktionsstörningar och obalanser vid tillverkning av golvskenor

Our report procedure identification of instability and disturbance in an automatic manufacturing line of processing and assembling of chair sliding rails at Sapas manufacturing department in Vetlanda.To obtain a stabile ground we have mapped the material flow to receive a comprehensive view and to visualise connections.We have examined cycle times at different stations in purpose to identificate bottlenecks. The result of our examination showed that the bottleneck of the line was the brush station. This leads to that the expected bottlenecks identificated by Sapa gets a delay time and by that a longer cycle time.Interruptions has a clear negative influence at the line performance so we have also assemble data through the operators report list and compiled these in order to find out the interruptions effect on the line. The outcome during our assembled period was that the reported interruptions corresponded about 30 percent of the total available production time. This has a clear negative effect on the line productivity and efficiency as we have calculated in order to get the present status..

Recúrrens ? En svensk novellfilm

Det här är slutreflektionen för ett examensarbetet Recúrrens, skapat av Mikael Berglund och Johan Cederholm från Medieteknik och Joel Arwidson och Charlie Persson från digital ljudproduktion. Recúrrens är en novellfilm vi gjorde från idé till färdig film och vi kommer beskriva hela vår arbetsgången i den här slutreflektionen. I den andra, reflekterande delen, diskuterar vi hur arbetet gick, motgångar, framgångar och slutresutlatet. Bifogat finns även manuset och bildmanuset..

Relationen mellan den personliga tränaren och klienten : att marknadsföra ett personligt varumärke inom träningsbranschen med hjälp av digitala medier

Purpose ? The purpose of the study was to examine how to promote a personal trainer in the fitness industry, as a personal brand, with digital media.Method ? To fulfill the purpose, the author have used three different methods. Both literature and quantitative and qualitative data in forms of a digital survey and interviews with two personal trainers regarding marketing and branding.Result ? Based on the collected literature and empirical evidence, facts could identify the importance of having a strong brand as a personal trainer, in order to recruit new clients. The result revealed that digital media is an excellent communication channel to nurture the relationship when you already have existing clients, but not when you want to recruit new customers.Implications ? This study is only developed through empirical data from a particular demography and a certain range, which could give a different result with other respondents.

En studie av stolstillverkningen i Stockholm 1750-1820. Material och metoder

Uppsats för avläggande av filosofie kandidatexamen iKulturvård, Konservatorprogrammet15 hpInstitutionen för kulturvårdGöteborgs universitet2013:08.

Tillvägagångssätt vid långsiktigt digitalt bevarande: en studie av bevarandeplanering

Den långsiktiga bevaringen av digital information innebär nya utmaningar för svenska offentliga arkiv. I arbetet med att utveckla system för att hantera dessa utmaningar utgår svenska offentliga arkiv ifrån en konceptuell rammodell kallad Open Archival Information System (OAIS- modellen). Syftet med denna uppsats är att bidra med en ökad förståelse för hur svenska offentliga arkiv kan hantera de aktiviteter som ryms under bevarandeplanering (Preservation Planning) enligt OAIS-modellen. För att uppnå syftet har existerande forskning på området granskats och kopplats till bevarandeplanering enligt OAIS-modellen. För att kunna utvärdera den existerande forskningen har ny empirisk data samlats in genom kvalitativa intervjuer. Viktiga slutsatser som har varit möjliga att dra i denna undersökning är att en migreringsstrategi är att föredra för svenska offentliga arkiv. Det kan även vara lämpligt för svenska offentliga arkiv att frångå OAIS- modellen och lagra teknisk metadata dels i informationspaketet och dels i en separat referensdatabas.

Tillvägagångssätt vid långsiktigt digitalt bevarande: en studie av bevarandeplanering

Den långsiktiga bevaringen av digital information innebär nya utmaningar för svenska offentliga arkiv. I arbetet med att utveckla system för att hantera dessa utmaningar utgår svenska offentliga arkiv ifrån en konceptuell rammodell kallad Open Archival Information System (OAIS- modellen). Syftet med denna uppsats är att bidra med en ökad förståelse för hur svenska offentliga arkiv kan hantera de aktiviteter som ryms under bevarandeplanering (Preservation Planning) enligt OAIS-modellen. För att uppnå syftet har existerande forskning på området granskats och kopplats till bevarandeplanering enligt OAIS-modellen. För att kunna utvärdera den existerande forskningen har ny empirisk data samlats in genom kvalitativa intervjuer.

Livet efter döden : Svenska tidningar anpassar sig till en digital framtid

The media industry in general and the newspaper in particular is going through major changes ? technological, logistical, economical ? due to the dropping sales and width of the printed daily newspaper. Few organisations have been spared the necessary rationalizations and cut-downs in staff. All of them are expected to produce more and better content, in more and new channels and platforms, with less resources. Some have been preparing for this a long time, others have never entered the digital world of news.

PLM-SYSTEM FÖR TILLVERKANDE MINDRE FÖRETAG : EN STUDIE OM LÄMPLIGHETEN AV PLM-SYSTEM OCH FÖRANKRING GENOM CHANGE MANAGEMENT

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

Kompetensf?rs?rjning under digital transformation En kvalitativ studie om hur sm? och medelstora managementkonsultbolag i Sverige arbetar med kompetensf?rs?rjning

The aim of this thesis is to analyze how small and medium-sized management consulting firms in Sweden work with human resource management during digital transformation. By interviewing companies, this study explores their approach to attracting, recruiting, and developing competence. The results showed that management consulting firms have good access to candidates, made possible by having a strong corporate culture and attractive working conditions - Crucial parts for attracting talent. Social media and networking are frequently used for marketing and attracting interesting candidates. Digital tools and social media showed to be useful during the recruitment process, but personal contacts and networking still play a central role.

Chatt - ett nytt sätt att kommunicera med bibliotekarien

This thesis presents a new way of providing library users with reference services, namely chat (text based digital reference service in real time). Our research questions focus on the role of reference service, a comparison of chat reference to other reference forms, and the interest for real-time, digital reference. Our literature review covered the areas of digital reference and reference theory, the results of which showed that an ongoing debate hardly exists among Swedish librarians on the topic of reference work. We interviewed librarians from the three different Swedish chat reference projects existing at the time of our study. Most interviewees were very positive about chat reference.

Metallersättning inom byggbranschen

In this paper the possibilities to replace metal with plastic in products for the building industry were looked into. The first part was a market examination where several suitable products were found. After evaluation the door latch for in-house doors was selected to be re-designed to better suit the properties of plastic.New types of mechanisms were designed with different functions that use the benefits of plastic materials. Models of these mechanisms were developed to evaluate their function. The components in the different mechanisms were adapted for manufacturing with injection moulding.To confirm that the plastic material could handle the appearing stresses calculations on the most vulnerable parts were carried out.

<- Föregående sida 17 Nästa sida ->