Skyddandet av gamla skogar med höga naturvärden är en viktig del i bevarandet av den biologiska mångfalden. För att kunna lokalisera och kvalitetsbedöma skogar med höga naturvärden används signalarter. En av dessa signalarter är Lecanactis abietina, gammelgranslav. Syftet med denna studie är att identifiera vilka faktorer som påverkar förekomst av signalarten L. abietina och täckningsgraden av apothecier.

Forest biomass is becoming an increasingly important source of renewable energy, and thereby the demand is increasing. There is currently 213 000 km of forest roads in Sweden that could be suitable for biomass harvesting. Harvest of biomass along forest roads both provides biomass and maintains the quality of the roads. Currently, the volume of biomass along roads can only be assessed post harvest, chipping and industry deliverance. As the decision of whether or not to harvest should preferably be based on more than experience, the TJ-method has been proposed. The TJ-method is a subjective method to quickly determine the dry matter quantity with the assessment being conducted from the roadside.

Forest management contributes to the changes in forest structure by turning heterogenous forests of varied age into homogenous forests of similar age and thus affect bird species depending on different structures or habitats which are lost during forestry. In this report, a study was made to investigate how the amount of decidious trees, dead wood and variation in tree diameter affect bird diversity. The purpose of this study was to be able to give forest management guidelines to increase bird diversity. This study was conducted by investigating 65 transects in forests of different structure south of Linköping, Sweden. Along the 65 transects, birds were inventoried as well as the vegetation.

An important process for grid companies in order to reduce power losses in electricity distribution grids is to figure out where and how they appear. This report describes the factors that cause power losses in low voltage distribution grids and methods for how they could be measured and analyzed. Measurement data for consumed and injected energy were collected for twelve low voltage distribution grids owned by Gävle Energi AB in order to analyze the size of the power losses and how the measurement uncertainty affects the collected data. Then models of three of the grids were created in MATLAB in order to analyze the data and the power losses were calculated to be compared to the collected data. Curve fitting were also used as a method in order to analyze the power losses from collected data.The results show that the losses in the studied grids are low.

The objective of this study was to study the agreement between two methods of indirect bloodpressure measurement in dogs and cats and to establish the within-method variation for the methods. The utility and practicality in the clinical setting were also evaluated for the both methods. The techniques evaluated were the oscillometric method and the Doppler ultrasonographic method. Thirtytwo dogs and 26 cats were used in the study and seven dogs and five cats out of these animals had diseases that may effect the bloodpressure. Bloodpressure was measured in both anesthetized and in conscious animals.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

Rapid Granulator is one of the world's largest producers of granulators, which is a kind of grinderwho grinds discarded plastics to granules which later can be reused when pressure molding plastics.The company wanted help in developing a new, or alternatively extending their previous,measurement equipment. The old equipment was hard to use, required changes in the code fordifferent measurement scenarios and had a limited array of measuring quantities. Rapid had an ideaof a similar concept only with a greater number of input ports, better range of applicable sensors andan advanced yet easy to use interface. The system is supposed to be placed at Rapid's test departmentwhere it will be used as a tool for finding faults and provide data which can be used for furtherdevelopment of the granulators.The project's members accepted the task and immediately began searching for suitable componentsfor the system. After the search was completed a list of costs, limitations, sensors, I/O's anddevelopment environment was presented to Rapid's staff.

Stump harvest could be found in the late 1970?s and the early 1980?s. And now when the prices on energy are high it has become an interesting topic again. This work has been conducted within Holmen Skog?s stump harvest testing in Norrköping.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

This report is a B.Sc. Forestry thesis work at the school for Forest Management, SLU. The work was an assignment from the forest owners? association Mellanskog. The aim of the work where to investigate the economical result of removing undergrowth trees before first thinning, and a follow-up of the contractors and their compliance with Mellanskog standards. This thesis work was divided in three parts: The first was to find a relation between the net volume from the first thinning and the cost of cleaning undergrowth trees. Secondly there was a follow-up in the field, to investigate whether the contractors have done the undergrowth cleaning according to Mellanskog?s directives.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

Lars Höglund AB is one of Scandinavia?s most qualified manufacturers of sheet metal products and provides custom designed products of very detailed precision. One of the main methods of manufacturing is laser cutting. When Lars Höglund AB signed up a new customer, with high demands in tolerances for the products, Lars Höglund AB thought it would be necessary to know the capability of the laser cutting machine. Also the process of how to retrieve this capability was interesting. The capability will be researched for the following elements: Cutting right angles in squares with a corner radius of 1 mmCutting corners which are not right angleCutting of circles with constant radius Measurements were made on 150 pieces of sheet metal details, which had been cut out by the machine.  The data from the measurements where later used to study the capability.

Root rot causes large economical losses for Swedish forestry. The spread of root rot can partly be prevented by treating the spruce stumps in thinnings. Late pre-commercial thinning (PCT) is one of the forestry measures where stump treatment is not used. Late PCT can be defined as: The act of cleaning the stand with the aim of improving accessibility and sight within the stand, and so to increase the mean stem´s volume during the first conventional thinning. The aim of this study was to examine how late PCT is performed, its spatial extent and if it aids the spreading of root rot. The study was limited to encompass late PCT before first conventional thinnings in spruce stands in southern Sweden. Samples of spruce stumps were taken from four stands where late PTC had been carried out.

Authors: Maria Bergholtz, Alexander WestessonTutor: Daniel EricssonTitle: Performance Measurement of Creative work ? a culture study at PS CommunicationKeywords: Key Performance Indicators, Organizational Culture, Macro-culture, Subculture,Micro-culture, Art, Business, Creativity, PS CommunicationIn the paper?s introductory chapter, the chosen problem area regarding art and business willbe presented. The paper?s studied empirical case will also be introduced here. This then leadsto the reports chosen research questions:How do the company management and the companies? creative personnel approach differ inthe discussion regarding performance measurement on PS Communication?-What causes these differences?What impact does the corporate culture have in the discussion about performancemeasurement of PS Communication?-Is the corporate culture weak or strong?The purpose of this paper is to resolve the stand still in the discussion regarding performancemanagement by creating an understanding of different people active in the organization?sapproach to performance measurement.

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.