The forests of Sweden are constantly changing. Map studies indicate that the amount of deciduous trees in Sweden has decreased in recent years in favor of the coniferous trees. The National Forest Inventory has since the early 1920s monitored the Swedish forests and in recent years has made the old data digitally available. In the present project, we have investigated how the numbers of stems in different diameter classes have changed for birch and other deciduous trees. The inventory was conducted in the same manner as in the first forest inventory.

En ny medicinteknisk produkt, ett resorberbart, kirurgiskt buntband (LigaTie®) för ligering av kärl har utvecklats vid Sveriges lantbruksuniversitet. En pilotstudie genomfördes för att undersöka begränsningsområdet med avseende på minsta möjliga kärldiameter som kan ligeras med produkten. Djurmaterialet i detta terminala in vivo-försök utgjordes av en sövd hund. Icke resorberbart band, som formsprutats i samma form som LigaTie®, fördes runt kärl tillhörande krös, mjälte och njurar. Bandets ände fördes genom den låsmekanism som finns i bandets andra ände.

The examination of the adequate nature conservation methods in a natural reserve, to conserve a specific species and / or increase biological diversity is the subject of this study. This work is based on four species, that can be found during the Spring season, liverleaf, wood anemone, brimstone and woodpecker. The incidence and availability is studied and closely observed for these species in twenty forests, i.e. ten forests which are nature reserves and ten forests with the similar characteristics as the nature reserves habitat, but are not nature reserves in Gnesta mucipality, Södermanland. Measurements of the tree crown and the diameter of the tree trunks where noted to study how these factors could affect the outcome of the abundance and incidence of the four species.

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Blekinge Hospital suffers from a budget shortage of 100 million SEK, while the government now requires that hospitals will no longer be running a deficit. Blekinge Hospital will then use their limited resources to survive in the future and the activity must be enhanced in order to keep costs low without having to lay off personnel. The idea is that the organisation should be more efficient with a more efficient resource usage. Performance measurement systems are important tools for achieving the policies set out within an organization, measuring and evaluating performance is a way to see where improvements in efficiency may be necessary in the business. Balanced Scorecard (BSC) is one of several measuring systems, where the focus is on measuring non-financial performances.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution.

This study was performed in collaboration with Moelven Skog AB, Örebro district. The purpose of the study was to review existing literature in order to describe the current status of harvester based measurement technology as the way to provide information for calculating payment to the forest owners. In addition to this, a short survey was conducted to find out how a switch to harvester based measurement would affect the administrative workload on timber purchasers working for the district. The literature study shows that the harvester measurement technology is ready to use if it is combined with well-established routines for control of the harvesters, methods for automatic quality indexing of the timber and ways of creating pricelists specially adapted for harvester measurement. Pricing each stem seems to be the most promising method. Stem pricing has several benefits.

För att uppfylla kraven på kvalitetssäkring samt evidensbaserad praktik måste hörapparatanpassning utvärderas objektivt. Syftet med studien är att redovisa nya forskningsresultat gällande objektiv utvärdering av hörapparater med hjälp av hörselgångsmätning, samt att beskriva en modern, evidensbaserad och kliniskt användbar metod för de vanligaste typerna av elektro-akustiska hörapparater med olika typer av insats. Studien består av en allmän litteraturstudie som beskriver tidigare rekommendationer samt en systematisk litteraturstudie där nya rön gällande metodiken vid hörselgångsmätning presenteras. Utifrån hörselgångsmätningens olika delmoment undersöker studien vilka konsekvenser de nya rönen har för utförandet vid hörselgångsmätning. I slutsatsen presenteras en metod för objektiv utvärdering av moderna hörapparater..

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The content of the following report is the summarized result of three students thesis at Blekinge Institute of Technology in co-operation with Water Jet Sweden AB. This report will give the reader a description of principles how to measure the abrasive mass flow in a waterjet cutting system. The work began with a visit to Water Jet Sweden AB to get a closer look at the problem. When the analysis of the problem was done the criteria were defined in the form of demands and desires. The main task of the criteria was to guide the search for the solution. The work proceeded with an extensive search for abrasive flow meters along with obtaining information about flow measurement in general. When the search for abrasive flow meters resulted in nothing all the efforts were concentrated on finding a principle of measurement that could cope with the criteria.

Blekinge Hospital suffers from a budget shortage of 100 million SEK, while the government now requires that hospitals will no longer be running a deficit. Blekinge Hospital will then use their limited resources to survive in the future and the activity must be enhanced in order to keep costs low without having to lay off personnel. The idea is that the organisation should be more efficient with a more efficient resource usage. Performance measurement systems are important tools for achieving the policies set out within an organization, measuring and evaluating performance is a way to see where improvements in efficiency may be necessary in the business. Balanced Scorecard (BSC) is one of several measuring systems, where the focus is on measuring non-financial performances.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.