In order to be able to change, to maintain competitiveness as a company in a world where rapid changes is part of the daily life, it is crucial to have knowledge and methods in how to change. One method, originally developed in Finland, is the Change Laboratory. This method is said to be efficient, not only concerning change aspects but also learning, since change and learning in this method is intertwined. This Master Thesis (20p.) tells about the process of conducting a Change Laboratory with a Swedish high-tech company and analyses factors in the process that makes change possible..

AbstractMI stands for Motivational Interviewing, the Swedish translation of MI is Motiverande Samtal. Adolescence is a period in life when challenges are encountered and pivotal choices are being made. It is during this period adolescents form their lifestyle, which have an impact for their health for the rest of their life. MI has shown to be an effective and appropriate method for school nurses within school health care, to utilize in approaching by adolescents with risk behavior. This is because it gives adolescence to take responsibility and empowers them to make decisions regarding lifestyle-changes.

AbstractMI stands for Motivational Interviewing, the Swedish translation of MI is Motiverande Samtal. Adolescence is a period in life when challenges are encountered and pivotal choices are being made. It is during this period adolescents form their lifestyle, which have an impact for their health for the rest of their life. MI has shown to be an effective and appropriate method for school nurses within school health care, to utilize in approaching by adolescents with risk behavior. This is because it gives adolescence to take responsibility and empowers them to make decisions regarding lifestyle-changes.

In this work, a method was developed and evaluated for calculating the life of welds under the influence of fatigue loads from a vibration environment. Typically, a shaker table is used for testing a component against vibration loads. The shaker table creates a vibration environment that is defined in the frequency domain by a power spectrum.Similarly, a virtual vibration table can be used to calculate the same type of load environment, which can then be used to calculate the expected lifetime. The benefit of this method is that it can be used in design, as well as in simulation of tests before physical verification tests are carried out.Today there are methods for calculating fatigue life of non-welded base material, but since many components contain welded joints, there is a need to apply this method to those types as well. To achieve this, the thesis combines two different areas, which together provide a method for fatigue assessment of welds using a virtual shaker table.The methodology is carried out by modeling the component, and its welded joints, in a finite element program.

The purpose of this study has been to maintain a deeper understanding of how unestablished, professional musicians can get discovered by the music industry by communication, branding and positioning of their brand at social media.We found that fans have a greater impact on unestablished musicians than we previously thought. They have to create an identity for their brand, keep active on social media and engage their fans. Musical artists must maintain an ongoing dialogue to keep their fanbase, preferably with emotions involved. No fans equals minimum attention from the industry. Uniformity and professionalism is also important, because it evokes seriousness.

This MA thesis analyzes how the protagonists and the narrative structure relates to ?the Child? as a linguistic/cultural construction in Mare Kandre?s early authorship (1984-1991). A thematic of children portraits defines this period of Kandre?s writing, which consits of the following works: In a Different Country (1984), The Annunciation (1986), Bübin?s Kid (1987), The Burning Tree (1988) and Aliide, Aliide (1991).Linguistic components, such as the word ?child?, the name ?Kid? and a reconstruction of the concept of childhood, holds an actuate position in these narratives when they first appear in direct relation to the protagonists. This suggests how generally accepted categories and concepts consciously are at work in Kandre?s writings.

Induction motors, often referred to as the workhorse of the industry, play an important role in production today. Therefore, it's important to diagnose any faulty induction motor prior to failure to avoid costly and time consuming production stops.This thesis compares methods for diagnosing induction motors in operation, MCSA, Park's vector approach and the standard method used by Swedish industries today. By simulating broken rotor bars and short-circuit in one of the windings, each method is tested and the results are compared using matlab.The results need further verification due to uncertainties of the condition of the test motor, even though the experiment gives a hint of the different advantages of each method. A combination of the methods should be able to tell if the motor needs further examination..

In each classroom there is a teacher with good intentions wanting what´s best for their pupils. But grades and tests in mathematics from 2009 in Sweden shows there is a crack between the subject being taught and the learning child. The purpose with this research is to find an understanding from a teaching and learning perspective of which teaching method is more suitable for teaching and learning mathematics by doing a comparison between two methods. The main question is:What are the advantages and disadvantages of the traditional and the laboratory method of teaching, supported by the two keywords teaching method and learning?This C-paper is based on a qualitative research aiming to gather an in-depth understanding of human behavior.

In this master thesis work, a new method called MultiScat, is compared with the conventional method with alfa-correction, for computing concentrations from intensities in X-ray spectrometric analysis. The conventional model is a linear model, which only takes the photoelectric effect into consideration. It doesn't consider Rayleigh and Compton scattering even though it has a great impact on the measured intensities. Here MultiScat differs a lot. MultiScat is based on a solution of the Boltzmann transport equation.

The purpose of this study was to examine experienced family counselors view regarding the concept of conflict avoidance in couple relationships. Twelve family counselors working in different parts of Sweden was interviewed using a semi-structured interview guide. They were asked to reflect on the following: their description of the concept of conflict avoidance, the consequences of conflict avoidance in couple relationship, gender differences and their own view on how to create conditions for constructive, therapeutic work in this respect.The result shows that the fear of conflicts, difficulty in expressing needs, different perceptions and expectations together with a difficulty to negotiate about differences, creates a lack of emotional and physical contact together with an absence of dialogue. The consequences of this in the long-term, a majority of the respondents perceived, are feelings of anger, resignation, powerlessness and unhappiness..

This study investigates whether the site index curve method (SICM) and the growth intercept method (GIM) can be used for site index predictions in younger Norway spruce (Picea abies (L.) Karst.) stands than recommended by current guidelines. For SICM it was thus investigated whether the method could be used for stands younger than ten years, and for GIM it was tested whether a starting point for the intercept measurements could be used below the recommended 2.5 meter. This was tested based on measurements taken from experimental stands in Tönnersjöheden Research Forest. For GIM it was found that the method can only be used when the TH-trees of a stand have five complete intercepts above 2.5 meters. For the method to be applicable beyond this, it will be necessary to adapt the underlying equations, perhaps following the Canadian example where a 1.3 meter intercept start is used. In conclusion it is not currently possible to apply the approach beyond the current recommendations. For SICM, SI predictions are accurate for the study area already form year three.

The global Positioning System (GPS) provides location and time information as long as there are unobstructed lines of sight to four or more GPS satellites. However, when this is not the case the signal may be inaccurate or sometimes even completely blocked. In these situations the Inertial Navigation System (INS) is an appropriate choice for positioning.  An INS has already been proposed in a previous thesis by Erik Andersson and the objective of this thesis is to fuse the GPS with the INS in a proper way. A part of this project is to decide the reliability of the GPS.Three methods for GPS reliability detection have been proposed. One method based on the statistical properties of each of the separate systems, and two methods based on the statistical properties of the residuals between the GPS and INS.

This is my thesis on the D-level at the university in Karlstad at the department for environmental science. It is an analysis of the idea of self-realisation in the deepecology movement.The Norwegian philosopher Arne Naess is one of the profiles in the foreground of deepecology in the world. His teories is important for the development of how to look at ecophilosophical matters in the nordic countries.i will therefor investigate his theories and see how Naess constructs the relation man-nature in his ecosophy T. The principle of self-realisation and identification is there the most important foundation for the antropocentric perspective.In my analysis I use Martin Bubers philosophy of dialogue and his thoughts about relational concept of the self as tools for my investigation.Ecophilosophy is an academic subject that touches a variety of fields of studies but has the collaboration between the subject of culture and nature as its base. Bubers concept of the self that highlights the third.

There have been, in some rare cases, difficulties with clamping of inserts with U-holesin their tool holder. According to the complaints, the inserts could not be properlyclamped or could fracture when clamped. A study has shown that variations inclamping behaviour are mainly depending by the position of the screw hole in the toolholder and the centering of the screw hole in the insert.The focus of this project has been the centering of screw hole in insert. It has beenshown that the screw holes are not always enough centered in the insert. Theproblem may occur after a certain step in the production, i.e.

En serie dialogseminarier har genomförts med 5 företagare som deltagare. Syftet var att un­dersöka om det var möjligt att med dialogseminariemetoden lyfta fram denna yrkesgrupps yrkeskunnande. Det resultatet nådde jag inte. Jag tolkar orsakerna som att jag inte hade till­räcklig förståelse i handling av flera av de kritiska elementen som jag hade behövt behärs­ka för ett lyckat genomförande. Min intellektuella förståelse räckte inte till.