Forestry and reindeer husbandry are entitled to use the same land for their operations. For this reason, conflicts occasionally arise between them. Soil scarification is a forestry operation which has a negative effect on the occurrence of reindeer lichen. Reindeer lichens are of crucial importance to reindeers and reindeer husbandry, especially in the winter when reindeers primarily feed on different lichen species (Cladina spp. and Cetraria spp.).

The basis of the study lies with a newly patented gearbox by cardiologist and inventor Stig Lundbäck. Stig founded CorPower Ocean AB to further develop the gearbox to be used in a wave energy Device. The purpose of this project is to develop a concept of a lifting system with CorPower Oceans gearbox that is more energy efficient than a hydraulic lifting system. The goal is to use technology from CorPower Oceans gearbox inversely to perform heavy lifting as an alternative to hydraulics. The project is limited to applying the gearbox and gear rack on a forklift with a lifting capacity of ten tons.The main tool in this project will be the product development process Systems Engineering where only the most relevant parts will be used to develop a concept.

The project Easy Battery Handling - EBH has been carried out in our auspicial and completedfor Devantini Corporation, a development company in Halmstad with its main concern inenvironmental friendly innovations.EBH has solved one of many technical challenges in one of Devantini corporation?s largerprojects. This main project involves the development of an electric powered formula racingcar. The part of this car that involved EBH was the battery handling to guarantee safe andquick battery exchanges during pit-stops.The solution became an entire battery module, hanging on the side of the car on two spearspointing out from the car. The batteries are exchanged by a specially designed trolley that isinserted under the battery module.

För närvarande läses elmätare av en gång per år, detta leder till att kunders elräkning baseras på ett schablonbaserat belopp. Enligt riksdagens proposition 2002/03:85 skall dock alla elkunder, senast fr.o.m. 1 juli 2009, faktureras efter faktisk elförbrukning varje månad. Detta har lett till en stor marknad för fjärravlästa elmätare som nu är ett måste för att kunna utföra den tätare avläsning som krävs. E.ON ES Sverige AB som är beställare av detta examensarbetet har specialiserat sig på att installera, underhålla och läsa av fjärravlästa elmätare åt nätägare.

Öppen källkod är ett sätt för programutvecklare att distribuera verket tillsammans med dess källkod och göra det fritt läsligt och modifierbart. Denna studie analyserar och identifierar risker och möjligheter som kan uppkomma vid migration till och driftsättning av öppen källkod. Metoden som används är intervjuer med representanter från ett urval av Skaraborgs kommuners IT-avdelningar. Studien har visat indikationer på att både risker och möjligheter skulle kunna finnas. Riskerna ligger främst i att kommunerna bör vara medvetna om att alla roller inom en kommun är viktiga, medan möjligheterna ligger främst i att de indikerar medvetenhet om begränsningar i kunskap vilket är viktigt för en lyckad migration och driftsättning.

The purpose of this report is to analyze the advantages of using programme software to monitor masshauling instead of using the conventional method. A comparsion between different programs will also be conducted in an attempt to determine the most affordable. This report is written for NCC Construction AB to help them choose a software most fitting for future projects.The report is based upon literature such as information taken from the developers website, existing reports with similar context, interviews with sellers of the software and interviews with people working in the building sector.The result of this report shows that there are several advantages with investing in a software that helps the management of a project and that it is something that should be taken under consideration instead of the existing method. Topcon is a clear favorite following the inquiries comparisons as done, when they deliver a complete system and not only a supplement to the current approach. Scanlaser are just in the beginning of its development, and is so far only out with an early version of the software, while Topcon has been brought further in development and therefore has more features in the program.

The number of locals in Stockholm who chooses the bike in front of public transport has increased significantly in recent years. The product purchaser of this project, Joakim Victorin at Sigma AB, has a keen interest in cycling, which resulted in a fairly obvious topic of this project; through a web application Sigma AB wanted to make it possible to handle results from professional as well as amateur competitions in cycling.The purpose of this web application is to simplify reporting and handling of competition for both small and bigger bicycle races. By providing the users of the system a platform independent client, any available Device may be used.This thesis has followed the development principles which prevail on the ASP .NET MVC 3 concept. When developing the system the Microsoft Visual Studio 2010 development environment was used. The framework and the pattern of ASP .NET MVC 3 is a prominent part of today?s web development.

SEM AB utvecklar och tillverkar tändstyrenheter för förbränningsmotorer, bland annat naturgas- och biogasmotorer. Tändstyrenheterna styr själva tändförloppet när de får en triggsignal från motorstyrsystemet (ECU). På grund av att enheterna används tillsammans med flera olika motorstyrsystem måste de anpassas for olika signaltyper och cylinderantal. Anpassningar av både mjukvaran och hårdvaran måste göras och detta kräver tid och resurser för utvecklarna på SEM.Syftet med detta arbete är att utveckla ett ingångsinterface till tändstyrenheterna som möjliggör att de kan anpassas på ett enklare sätt. För att minimera antalet komponenter i tändstyrenheterna ska även funktioner som realiseras med diskreta komponenter, om möjligt, integreras i ingångsinterfacet.En lämplig programmerbar krets för detta ändamål har valts.

The task for this thesis is to design a tool that is used to cut-out preforms of thermoplastic adhesive and also to make an estimate of costs for the stamping tool. The tool is used in the repair process at the MCM production line. The result of gathered information has affected how the design of the stamping tool has developed. The handling of thermoplastic adhesive in the repair process is one of the factors that influenced the design. The adhesive is sensitive for exposure to moisture. Therefore an automated feeding system of the adhesive is not recommended. The users wished for an automated stamping tool.

Alkolås är en teknik som gör att fordonet inte går att starta om föraren har alkohol i utandningsluftet. Vissa alkolås som hittills använts är utrustade med en minnensfunktion som regelbundet töms och bearbetas i ett särskillt pc-bearbetat dataprogram. Syftet med undersökningen var att utreda vart gränsen går till att kränka den personliga integriteten för att öka trafiksäkerheten med hjälp av alkolås, samt att utreda attityden till alkolås. Undersökningen är baserad på enkäter som besvarats av Luleå Lokaltrafik, Pitetaxi och Testplats Botnia. Ett problem med alkolås är att individen inte har kunskap om alkolåsets funktioner, och de integritetsproblem som kan uppkomma.

Det har blivit allt vanligare att vi idag använder våra mobila enheter till att besöka webben. I detta examensarbete undersöks vilka centrala designprinciper en designer bör eftersträva när avsikten är att förenkla användningen av en webbplats i en statisk och en rörlig situation via den mobila enheten. Examensarbetet innefattar en litteraturgenomgång, observationsintervjuer vid två tillfällen och en prototyputveckling. Det första intervjutillfället identifierade de grundläggande designprinciperna som sedan stod till grund för prototypen. Det andra intervjutillfället genomfördes mot prototypen med samma individer.

The purpose of this degree project is to come up with a new package to Renat Brännvin for »Vin & SpritAB« and make the product more attractive on the market of bars, restaurants and hotels. The commissionhas included to decide the material of the package, whether it´s possible to manufacture the productand to make an estimation of the costs.The conditions that »Vin & Sprit AB« set up was to make the product attractive to a younger targetgroup, in this case people from 20 to 40 years old. As Renat Brännvin is considered to be a product of firstclass it´s of great importance that the package reflects the look of a premium product.At first we looked at the history of the company »Vin & Sprit AB« and Renat Brännvin. We decidedthat the package schould consist of a bottle, glasses and a Device used when serving the liquor. To getinspiration before sketching we studied different kinds of bottles, glasses and serving Devices.

We can see an increasing middle age population in large parts of the world. People are healthier when they retire than they were before. As people grow older, physical and mental changes occur that can make the use of cars more complicated. The possibility to travel by car is important for many people to keep the connection with the society and to feel independent. How can Volvo cars face the needs of this growing target group?The purpose of this project is to make a car concept that responds to those needs, it is therefore important to maintain the values of Volvo cars.

In today?s industry it is starting to get more and more interesting with wireless systems and solutions for applications. To be able to reduce the amount of cables drawn to various machines which takes both space and an extra fee for every cable drawn. Some systems might require the user to use a handheld Device that is directly connected by a cable which in some machines might be inelegant for the user.The goal with this bachelor thesis is to develop wireless monitoring of the machine operators position that is working with heavy industrial machinery. The thesis started out with researching different techniques for positioning a transmitter indoors, this was done in order to get a better understanding on how to go about.

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for Device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.