The running of gas turbines with low emissions causes high pressure pulsations to arise in the combustion chamber. These pulsations are high amplitude sound vibrations. At some frequencies these are harmful to the gas turbine. Hence these pulsations are monitored to avoid operating conditions where pulsations are specifically harmful. It is necessary to expose the system of known pulsations to verify the functionality of the monitoring process.

The dialysis ward at Karolinska University Hospital is a highly pressurized work environment filled with critical treatment situations where patient?s lives can be constantly in danger. Staff have to deal with a myriad of alarms and error codes in response to their patients varying ailments. The workforce at the dialysis ward lack controlled environment training, sufficient to address all of the potential treatment scenarios, with no risk of jeopardizing the patient?s condition.The purpose of this essay is to design and test the efficacy of using an IT based device for dialysis education at Karolinska University Hospital.The main topics this essay intends to address are:? Identification of user scenarios and training fields.? Prioritization of key training areas.? Utilization of IT in effective staff training.? Design of a conceptual prototype.The process focuses on the user and their needs.

The eld of Brain-computer interfaces (BCI) concerns linking together an external device with the brain of a human or an animal. By doing this the conventional use of a mouse or keyboard can be circumvented, which can greatly benefit people with different types of diseases that cause paralysis or other loss of motor control, such as Amyotrophic lateral sclerosis (ALS). A BCI can also be used for cognitive training of either healthy or mentally impaired subjects to increase cognitive capabilities.In this thesis an implementation of an interface is made against such a device, the Emotiv EPOC Headset. The result is meant to be a stable basis for further study using the device. An in-depth study of the history of EEG and its current use in clinical work and research in the topics of BCI as well as Human-computer interaction (HCI) is presented.

Background: Health economic evaluations are becoming an increasingly important means of analysing which care alternative resource utilisation is the most cost effective. It is a new topic in the medical device industry that causes much uncertainty and unstructured use of the actors involved.Study questions: Why is it difficult to develop, implement and disseminate this standardized health economic evaluation models in medical technology? Is there a possibility to standardize health economic evaluations within the medical device industry?Purpose: The purpose of this study is to investigate the standardization issues for health economic evaluations within the medical device industry.Method: A qualitative approach was used in the form of interviews with five actors that are active or have a connection to the medical device industry. The data collection consists of journals, reports, Internet searches and literature among other things.Conclusion: It is possible to standardize, but with certain restrictions such as the county council's budget, influence of industry-specific factors, lack of knowledge and the important interaction between actors..

As new ways of using computers are constantly being developed, other ways of interacting are made possible. One of the most desired types of interaction with computers is a touch-screen where the user can actually organize everything simply by using the fingertips. The purpose of this project is to enhance an existing framework with an application that works with a touch-screen device. The application is to be used as a tool for presentational usage. The result is an application where the user by simple means can use a touch-screen to hold a professional presentation.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The objective of this study was to investigate how the local newspaper readers felt about reading the local newspaper in a tablet device, such as the iPad. We wanted to study the attitudes from consumers towards tablets and if the traditional local newspaper can be substituted with a tablet device. We decided to use qualitative interviews as our method. The selection of respondents was based upon age, whether or not they had a subscription and if they owned a tablet device or not. We accomplished fifteen interviews with respondents living within the area where the newspapers of Barometern and Oskarshamnstidningen are spread. The study shows that the majority of the respondents who already had a subscription tended to lack interest in changing their traditional newspaper consumption. Their habits of reading the local news on paper were strong.

Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

The mouse (Mus musculus) is the most commonly used mammal in biomedical research and can easily be restrained by both hand and by a device. Restraining animals causes stress that not only decreases the animal?s wellbeing, but may also influence the research results. The first aim of this study was to train mice to voluntarily stand still using positive reinforcement training. Another benefit of teaching a mouse to stand still is that you can avoid anaesthesia for some procedures.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

In recent years, several problems in the field of assistive device have been lifted. To manage the development Beslutsstöd (Decision support) has emerged as a systematic working method. Beslutsstöd is designed as a guideline and serves as a tool for physical therapists and occupational therapists in the prescription process of assistive devices. Beslutsstöd thereby aims to improve the quality and effectiveness of the prescribing process of assistive device in the organization of the municipalities. An implementation evaluation about how the implementation of Beslutsstöd in the municipalities did proceed has not been done.

In the field of IT-forensics you may often get to analyze different types of digital devices. One ofthese devices is the GPS navigation system. Nowadays GPS technology is getting more and morepopular and is included more frequently in different types of devices. With this article we want topresent the differenent obstacles and possibilites that a forensic investigator is presented with in thistype of investigation. We will be comparing different software suites and make use of forensic toolssuch as EnCase.The reader should get some understanding of the methods there are for analyzing one of these devicesand what problems that may occur in the investigation process.The article presents how the investigator can use different methods to gain information such as recentroutes, favourite destinations and other information that may be stored on the device.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.