This thesis has been carried out to the Technology Group at industrial plant Tube Mill2012, which belongs to the Sandvik AB. Technology Group is a unit that takes care ofall requirements and suggestions regarding investigations, test runs and designmodifications. The main objective is to identify and analyze the existing initializationprocess to see where improvement opportunities exist and to come up withsuggestions for improvement, supported by previous research and literature. Anextensive literature search and case study has been conducted to provide a solidfoundation to refer to during the work. Completing the interviews and the workshopgave a clear picture of their unstructured work and approach, how the lowrequirements on the received orders caused problems for the group as well as thelack of a standardized resource allocation method provides major delay factors.Solution proposal then became a very easy process model in five steps with all theinformation gathered in one place.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

This paper consists of a comprehensive look at the advertising industry as a whole and communication mould various guises in the context of technology development. It also describes a production in the form of a commercial for a network of ten companies called The Lodge. The result is discussed based on questions on the subject communications and marketing. The discussions of this work will then be transferred to a proposal for further research..

This essay examines resident experiences and notions of the Gotland countryside and their ideas about the future. In particular the countryside is studied as both space and place. In space and place people interacting. People are therefore important components in the study of the landscape. One can say that the landscape and the interaction between people affect resident experiences and notions of the countryside, as well as people certainly affect the landscape.

Background: Competence development has become more important since the pressure on effectiveness is increasing and organisations are expected to constantly improvement. The design of the competence development activities is governed by the strategy which in turn will affect the outcome of the same. A knowledge intense business in which changes recently have taken place is healthcare, a business in which competition also has increased as a result from globalization. Due to this, it is highly important to take care of and improve the competence of individuals. According to this, we have found that healthcare is an interesting business to study with regard to competence development.

The aim of the study has been to explore certain aspects of implementation perspectives and to analyse the introduction of an environmental management system called ecoBUDGET in the Municipality of Växjö. A framework has been developed through thorough studying of earlier research in the field of policy implementation in public administrations. The framework is made up of the steering relationship between politicians and public administrators, decision making and implementation and the ability, want and understanding of how and why decisions should/could be implemented. By using this framework in combination with interviews held with individuals that host valuable knowledge and experience of the system these questions were to be answered:-What factors in the implementation process of ecoBUDGET can be seen to have facilitated alternativly hindred the integration of the environmental management system within the municipalitys administration and companies?- In what direction has the integration of a sustainable devleopment thinking for the environment thru ecoBUDGET evolved within the organisation?The result came to be that sustainable development and the strive for this is more and more amalgamated in to the everyday work within the municipal organisation and that the environmental management system is likely to have played a part in this..

Abstract The purpose of this project is to develop a modular processor card which is intended to work as a platform for Kitron Development Karlskoga. The modular processor card is meant to be used as a control system in development projects, mainly in medical and industrial products. The processor card will consist of a central unit with the basic functions for a control system. Furthermore there will be complete modules with machine commodity and programming, to pick exactly the necessary functions for a specific application. With consideration to the specification of the development and the main unit, I chose an adequate microprocessor (AT90CAN32) as core and interface circuits to stated border areas. The construction is first completed in the program MultiSim and then remade in the program OrCAD Capture. The programming language C was used in the software model.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

Every plan and program decided on by an authority or municipality, where the environmental impact can be considerable, must be environmentally assessed according to Environmental Code, the Planning and Building Act (PBA) and the Regulation on Environmental Impact Assessment.The purpose of this study is to examine the Environmental Impact Assessment (EIA) for The Region Development Plan for the Stockholm Region, RUFS 2010. The plan was approved by at that time the Regional Planning Office (Regionplanekontoret), which procured the process by consultants. RUFS 2010 includes two merged plans ie. a regional Development Plan (RUP) and the Regional Spatial Plan for Stockholm. It was necessary to establish an environmental assessment of RUP, but not for the regional plan.

Students at the School of Engineering at Jönköping University have on behalf of the swimming organization ?Nässjö Sim och Livräddningssällskap? conducted research on how to monitor and evaluate swimmers and swimming groups in a simple and efficient manner with a focus on usability and user friendliness. Since no system existed that could meet these requirements, the client had a desire to tailor and develop such a system. The purpose of this work was to develop a system that would work as a tool to be used by coaches and swimmers alike and allow them to eventually follow the development of swimmers and swimming groups. The organization also wanted to have the ability to create tests and exams, both for land and water training, register these in the system and in a structured way know which swimmers took and passed these.For this thesis, the following questions functioned as a framework for progress.UsabilityHow to design a usable system and what is required?SystemWhat type of system is best suited to meet the client's requirements and preferences?Competition resultsHow can one retrieve all the competition results for swimmers of Nässjö SLS?DatabaseWhat type of database is best suited to easily share data with an external existing database?Usability has been the main focus throughout the project.

Background: Since the start of the twenty-first century it has become very important for companies to act in a responsible manner, in guides of CSR. The idea is that companies have more responsibilities than to achieve a higher profit for their shareholders. They should also care about the society and act in a responsible way.Problem discussion: Problems concerning CSR are that the internal part of the sustainability work has not encountered the same level as the external part of the sustainability work. Companies are today struggling with implementing CSR into their business strategies.Research questions:1. What does a company has to consider when working with CSR? 2. How can management control systems help the implementation of CSR into the organisation?Purpose: The purpose of this thesis is to examine what a company has to consider when working with CSR and how management control systems can help the implementation of CSR into the organisation.

It has become more and more common that companies in the service sector are beginning to understand their own effect on the environment and thus the need to contribute to a sustainable development through acting in a deliberate way. Serious environmental work can help a company to improve their image and in that way win competitive advantage that leads to improved profitability. In a short time perspective, adjustment to the environment is an opportunity to gain competitive advantage and an opportunity to develop a profile. In a long time perspective it is about survival. The environmental work has become a sequel to the work with quality.

Swedish pre-school teachers are in the middle of a debate regarding a form of general school competence that today is criticized by mass media. The training and skill development that is used today is an important tool in the development of the organization as well as the people that work in them. This study aims to explain how this training actually is performed and the opinions of the pre-school teachers that actually finish the training. Previous research in this area has primarily been focused at the types of methods that exists from an executive standpoint. This study, instead, aims to shift that focus to the individual worker.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

The aim of child health care is to promote health and development for all children, to early identify problems that concern children´s growth and development and to prevent ill-health among children. Today in our society the proportion of children who are underweight are few.The aim with this study was to describe paediatric nurses experience in meeting with underweight children and their parents. Interviews were implemented and analyzed according to qualitative content analysis. Focus was placed on looking at differences and interpretations in the text content. The analyse resulted in six main categories, such as a need of sensitivity and a holistic view from the nurse, difficulties in handling the meeting because lack of tools.