In this project a washing station has been constructed for Albany International AB. At present, there is no existing system to clean the dirty pipes that are coming back to the company.The work followed the product development process, and it started with the requirements list. This was followed by brainstorming, evaluation and completion.The result was a concept for de present time and one concept for the future.The present concept is intended to be built immediately. This is an adjustable bench with sliding bearings to facilitate the work. The actual cleaning is done with a high pressure washer that uses hot water.

During springterm 2010 Erik Persson and Magnus Hansson performed their ThesisWork with DIAB Laholm, in Hallands County for University of Halmstad.The project has been a product development project without exterior customers. Thusit had a great emphasis on functionality and less emphasis on marketing and such.This reflects the ambition to develop machinery to be used within the productionfacilities of DIAB Laholm, not to be sold to exterior customers.Main objective has been to create machinery which enables the production ofrotational symmetric work pieces within a NC-milling machine with 5 axles. Thework pieces milled will be made of DIAB?s material Divyncell with varyingdensities.The project has followed Fredy Olssons method involving Principal ? Primary ?Manufacturing constructions. However a complete manufacturing construction hasnot been made since DIAB just wanted a good Primary construction which will serveas a base for finishing touches at DIAB.By the end of the project material including calculations has been sent to DIAB andthey will finish the work and manufacture the machine if they find economic viabilityin this.The work method has been suited for this by several reasons, it was created withthese projects in mind and it?s also the method most familiar to us..

Abstract Tutor - Anders Richtnér History - Theories suggest that Lean Product Development strategies dramatically increase a company's performance through enabling faster T-T-M, Quality and Costs of Product Development. Purpose - The purpose of this paper is therefore to investigate whether the implementation of LPD actually affect corporate performance measurements T-T-M, Quality and Cost, in a positive way. Methodology - This Bachelor thesis is an exploratory investigation of the concept of Lean Product Development within a global IT- company, performed through four case studies, interviews and complementing corporate performance data. Findings - With empirical data and subsequent analyzes in mind, we note the following; it is clear that the project that produced the best results, in terms of T-T-M, Quality and Cost, also was the one furthest in the process of implementing Lean Product Development..

The result of this work is a plan for the development of an 1128 m2 elderly raised garden. The purpose has been to create an overall plan covering the long-term development of the garden. The work process has covered a description of the garden of today, review of requirements, analysis of the garden sections, design of a new plan as well as starting the construction of the new garden. The plan covers a time period of a couple of years to create the new garden since the construction work is carried out during spare time with small resources available. The planning must contain review of functions such as protection from insight, eating area and compost area. Also the esthetic expression must be planned. Colors, shapes, choice of material and plants together make up the esthetic expression. It is recommended to include anything you wish to create in the garden. In a raised garden one has to overcome the step to remove trees and shrubs and think different.

Project Safe Sleeping Position (SSP) contains all parts in a product development phase. The project comprises the whole cycle from idea to a complete product where all aspects are included. The scope is to develop an innovative solution for a common known problem and work with all parts within the man-machine-way. The result is an inflatable product which secures a child in the correct way for the seatbelt to work properly in the rearseat of a car. Ergonomics, technical extent, usability, design, construction, product solutions and market potential are some of all parts witch the project includes.

Assessment is considered one of the most important tools used today by people in almost everything they do and learn. This also applies to school, where assessment is considered as a constant companion to teaching and used in order to develop students' learning and skills. Assessment is also an educational necessity which has different purposes and therefore different consequences.                                                                                                                        The idea of ??this thesis was on the basis of the interviewed teacher's perspective to investigate what role the formative assessment has on the development of pupils' learning and knowledge in mathematics for primary education, and explore how the teacher can, according to my informants, work with this assessment practice in the classroom so that it promotes the learning of the students in the best possible way.                                                                To carry out this study, I used qualitative research studies, the interview method, and also talked to five different teachers in the lower school ages on their view at the work of the formative assessment. Theoretical basis of the thesis is also based on the research that says that the assessment can be used to promote student learning and knowledge, but also the teacher's learning?s in the educational process: assessment can and should be an assessment for learning.

Purpose: We wish to gain a deep knowledge about product development processes in relation to the aspect of time in companies in highly technological and rapidly changing markets. The purpose is to establish how organizations better can employ time as a resource to make the product development process more efficient. Conclusions: Information we gathered from theory and primary data show that information flow, synchronization and time profit when seeing time in three dimensions are factors which should be reflected in the architecture of a product development process. To illustrate our findings, we decided to create a model..

The Swedish system of environmental quality objectives is a so-called MBO, Management By Objective and has the purpose to guide the Swedish society towards sustainable ecological development. The system involves the whole society from the parliament and the government down to individual citizens. At the regional level, it is the county administrative boards that are responsible for the work with the system of environmental objectives. At the County Administrative Board of Västmanland County, it is the environmental unit who is in charge of work with the environmental objectives and they want input for how to improve their work with the environmental objectives, both internally at the Administrative Board and externally with external parties.The main purpose and goal of the study is to present the work of four other county administrative boards regarding their work with the environmental quality objectives and to identify external parties? opinions of how they want the County Board of Västmanland county to work with them in this matter.The work is designed as a case study of four county councils, where the environmental objectives coordinators at the four county administrative boards were interviewed about their work with environmental quality objectives.

Title:   Controlling Mälarenergi by Balanced Scorecard Seminar date:  2009-01-16 Institution:   School of Sustainable Development of Society and Technology Course:   Bachelor thesis 15hp Authors:   Camilla Nilsson, Amanda Agestav Advisor:   Ulla Pettersson The main issues:                What does Mälarenergi's Balanced Scorecard look like? Which Balanced Scorecard perspectives are important to Mälarenergi? Is Balanced Scorecard a purposeful control model in order for the group management to fulfil the aims of the owners' directives? Purpose:                            The purpose is to find out how the group management at Mälarenergi works with Balanced Scorecard. Is Balanced Scorecard a purposeful tool for the group management to fulfill the aims of the owners' directives? Method:                             This study is based on a qualitative research method in the form of interviews. We have interviewed one respondent.

The aim of this thesis is to better understand branding work in government agencies. What can systematic branding work result in, in a government agency, besides a strong brand in itself? Can it contribute to the democratic mission that government agencies have?Based on background information on government agencies, their mission in terms of communication, their particular characteristics in relation to the private sector; brands and how they are developed; as well as theories in organizational communication, and research on the possibilities and risks of branding work in the public sector, a qualitative case study on the Swedish Patent and Registration Office (PRV) was carried out.The case study consists of a study of PRV?s brand platform, their website as well as an interview with the person responsible for developing the platform. The information gathered during the case study indicates that PRV?s brand work seems to have resulted in a number of positive outcomes.

A protection helmet for young people (3-7 years) in winter environment has been developed in this thesis. The result is a concept proposal for development at STIGA Sports AB in Eskilstuna. This thesis work has been performed during 20 weeks, for a Master of Science in Product and Process development at Mälardalen University Eskilstuna Sweden in September 2009 to January 2010. The helmet is shown as a CAD model with detailed solutions to the outer shell, interior and adjustability (in sizes 50-56 cm) which are the three focused areas in the development. Also a physical model in scale 1:1 has been developed and is shown in this thesis work.To achieve the best result possible the process started with an analysis of the market and the product.

AimThe purpose of this study is to, from a perspective of a PE teacher, look at how teachers of physical education in elementary school designs and assesses the teaching of swimming. The issues underlying the study are as follows:Which elements are included in the swimming education and how do teachers work with these operations?What does the PE teachers classify as swimming ability and what do teachers experience as obstacles for the students development of swimming ability?How do the PE teachers interpret the knowledge requirement in Lgr 11?MethodThe study is based on six interviews of qualitative nature, with PE teachers from various municipalities in the region of Mälardalen.ResultsThe result yielded by the study is that the swimming classes can take different forms depending on whom the teacher is. Common to all the teachers in the study is that they teach emergency management and lifesaving. When it later comes to teaching how to swim and practice, the teachers who teach in the younger age groups work more concentrated and continuously with swimming, while the teachers who work with the older age groups just checks whether students can swim or not.

For the past decades, culture has been given a role as a factor for local and regional development. But what is meant by development and in what ways culture can be of importance in this aspect can be unclear. This thesis examines the perception of the role for local and regional development of one specific cultural place and network ? the cultural cooperative Not Quite in Fengersfors, Sweden. I study the way the role as developer is expressed and interpreted in the discourse of the cultural workers who are members of the network and in the discourse of public cultural policy in the region Västra Götaland and in Åmål municipality.

Man spends most part of the day at work and is therefore influenced by it?s ambience. That?s why it?s important that the environment at work is health promoting and can function as a supportive environment. The purpose of this study was to describe job satisfaction among employees and to analyse a possible connection between job satisfaction and employees experiences of SOC.

This paper is about how the perception of knowledge and examinations differs in two different countries, Sweden and Kenya. The purpose of the paper is to examine similarities and differences in the two countries school systems, and to study the teachers? role in students? development. In the literature study I find out what different authors explains different types of knowledge and how important the teachers? role is for students? development.