Construction of an autonomous wind station was a project with the goal of creating a product that could collect wind data from a sensor and then transfer this data to a server wirelessly over the GSM network. The device would be powered by batteries and solar cells and function fully without requiring external power supply. This required that a small computer was constructed and programmed to store and send data at predetermined cycle times and programming of a server that received the sent data. The project also required optimization of power consumption and dimensioning of solar cells and batteries based on this. The construction of this station demanded research both for the selection of hardware and programming software. The computer was based on a microcontroller and a GSM module that sent the data over the 2G network.

In the field of IT-forensics you may often get to analyze different types of digital devices. One ofthese devices is the GPS navigation system. Nowadays GPS technology is getting more and morepopular and is included more frequently in different types of devices. With this article we want topresent the differenent obstacles and possibilites that a forensic investigator is presented with in thistype of investigation. We will be comparing different software suites and make use of forensic toolssuch as EnCase.The reader should get some understanding of the methods there are for analyzing one of these devicesand what problems that may occur in the investigation process.The article presents how the investigator can use different methods to gain information such as recentroutes, favourite destinations and other information that may be stored on the device.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

The use of mobile devices has increased dramatically in recent years and the development of newtechnologies has made it difficult for developers to know what screen size and device the visitor isusing. This has resulted in the fact that today there is a problem with the interface for web pages onmobile devices. They are not adapted to the flexibility required for the interfaces to be recognizedon various mobile devices. Instead of developing two separate web pages, where one is designed formobile devices and one for desktop and keep them both continously updated, responsive webdesign simplifies the work process. Responsive web design is a flexible and dynamic interface thatadapts to mobile device and screen sizes.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

EW26 is a Bachelor thesis carried out by students, Jessica Blomberg, Sara Danielsson and Mikael Johansson, during the academic year 2010-2011 at the Innovation Engineering Program of Halmstad University. The project was conducted in close cooperation with Ergosafe AB.Ergosafe develops, manufactures and sells electric sliding windows. Due to the company?s current expansion phase they want to increase their product range. The company has identified a need for large windows that moves vertically.

The purpose of this work is to design and construct a device able to measure the mechanical attrition of oxygen carrier particles. Those particles are used in chemical looping combustion and in the present situation there is a lack of knowledge in how the attrition process work and in which extension. To find already tested solutions trying to answering this problem a literature study wascarried out and the best solution found was the so called Grace-Davison Jet-Cup method. This method is supposed to emulate the attrition caused by a cyclone separator and its advantages are that it is possible to use small test amounts, 5-10 g, and a thirty minutes long test will be enough to acquire useable results. An device was designed based on the Jet-Cup method with some slight modifications.

In the field of IT-forensics you may often get to analyze different types of digital devices. One ofthese devices is the GPS navigation system. Nowadays GPS technology is getting more and morepopular and is included more frequently in different types of devices. With this article we want topresent the differenent obstacles and possibilites that a forensic investigator is presented with in thistype of investigation. We will be comparing different software suites and make use of forensic toolssuch as EnCase.The reader should get some understanding of the methods there are for analyzing one of these devicesand what problems that may occur in the investigation process.The article presents how the investigator can use different methods to gain information such as recentroutes, favourite destinations and other information that may be stored on the device.

Syftet med undersökningen är att jämföra elevers förståelse i fysikämnet efter en laboration respektive en demonstration, samt att undersöka elevers uppfattningar om laborationer och demonstrationer. Som grund till arbetet har olika kunskapstest, en enkätundersökning och korta lärarintervjuer använts. Undersökningen genomfördes på 56 elever i grundskolans senare år. Resultaten visar att både laborationer och demonstrationer bidrar till att elever skaffar sig en förståelse för de moment som bearbetas i undervisningen. Dock kan det vara nödvändigt att som lärare välja den metod som lämpar sig bäst till varje undervisningssituation och tänka på att demonstrationer måste planeras väl för att uppnå syftet med dem.

People working with handling parcels in terminals are often victims of musculoskeletal injuries. This is largely due to the hazardous lifting of too many parcels which are too heavy and unsuitable work postures. The human body?s ability to lift and grasp objects is so outstanding that developing a device with the same capability is very difficult.The goal of the project has been to develop a technical device that will improve the handling of parcels with regard to ergonomics. The area of concern was the lifting of parcels between the conveyor belt and the cargo space of the freight car.

Något som har blivit en stor fråga på sistone där arbetsgivare tvingats ta ställning är huruvida anställda har tillåtelse att använda sina privata enheter på arbetet eller inte. Användandet av smarta telefoner och surfplattor i privatlivet har på bara några år ökat relativt drastiskt. I och med detta så har viljan också blivit större bland arbetare att kunna utnyttja sina privata enheter även i arbetslivet. Detta fenomen kallas för Bring Your Own Device och implementationen av detta kan orsaka vissa problem och kan exempelvis påverka nätverkssäkerheten. Arbetet ämnade, att genom en enkätundersökning, undersöka hur pass vanligt det var att man tillät privata enheter i arbetet bland Sveriges kommuner och landsting.

In the field of IT-forensics you may often get to analyze different types of digital devices. One ofthese devices is the GPS navigation system. Nowadays GPS technology is getting more and morepopular and is included more frequently in different types of devices. With this article we want topresent the differenent obstacles and possibilites that a forensic investigator is presented with in thistype of investigation. We will be comparing different software suites and make use of forensic toolssuch as EnCase.The reader should get some understanding of the methods there are for analyzing one of these devicesand what problems that may occur in the investigation process.The article presents how the investigator can use different methods to gain information such as recentroutes, favourite destinations and other information that may be stored on the device.

The objective with this project was to design a new lifting aid connected to toilet chair.A questionnaire distributed at three homes for aged people indicated that there was an interest in a mechatronic lifting device.Since existing products have limited tilting functionality, the new design was chosen to introduce lifting by motorised tilting of the sitting platform. The mechanical construction was analyzed based on a maximum load caused by a person with weight 160 kg. Two linear actuators were used to control the tilting/lifting of the sit ?place, making standing-up easer.Finally, 28 persons tested the new lifting device and gave their impressions. Many appreciated the safe, stable lifting speed.

As requested by the company Husqvarna AB, we have developed a prototype of an electrical start device to a chainsaw. This was done through the development of new details in Catia, which has been integrated with existing details. Electrical components have been purchased by HAB electronics. In parallel with the modeling calculations was done, which was the basis for determine dimensions and the choice of an electric motor and gears. Prototype 1 improved gradually and led to prototype number 2, which became the final result.

Scania provides a fleet management system for hauliers who want to control their fleets in anefficient way. The system includes an onboard computer with touch screen called ScaniaInteractor where the driver can access GPS navigation, order support, message service and otherfunctionalities. The purpose of this thesis is to develop a concept for logging the user interactionon the Interactor and analyze the result which enables further development and optimization ofthe interface.A demonstration application is designed, implemented and tested for the purpose of showing thepossibilities and difficulties with logging of interaction. The result shows that logging is quiteeasy to implement and that the amount of produced data is small and therefore not expensive totransfer via GPRS to a central server where searching and analysis can be done. On the otherhand, the biggest challenge lies in the analysis and interpretation of the logged data and to applyit to the development of the interface.