The aim of this master?s thesis is to investigate a possible connection between the development of mobile library services in Sweden and the development of cultural policy during 1945-2006. Our main question is: is there a connection between the development of the mobile library services in Sweden, as described in Biblioteksbladet, and the development of cultural policy as portrayed by Anders Frenander and Dorte Skot-Hansen? In order to answer this question, we formulated two secondary questions: - How are the mobile library services described in Biblioteksbladet between 1945 and 2006? - Are there any similarities or dissimilarities between the development of the mobile library services and the development cultural policy as described in our theoretical models? If so, in what way? Our study covers the entire time period since the start of the mobile library services in Sweden in the late 1940s. The final year for our investigation is 2006.

The aim of this study is to examine the democratization process of Kosovo in the years after the countries independence was assured. Two central questions for the case study consist of whether a democratic improvement in the country has occurred and which factors, positive and negative, are present to further improve or impede the democratizationprocess. The study builds upon two central definitions, democratic states and democratization in order to gain theoretical background to be able to measure these two quite abstract expressions. A socioeconomic model is used to measure favorable or negative developments within Kosovos society and the findings of this model confirms the hypothesis of modernization theory, namely that increased socioeconomic development increases the chance of a positive democratizationprocess. There has been a positive democratic development aswell as socioecomic progress but since the nature of this study is merely descriptive and not explanatory, it doesnt make claims on the explanatory power of modernization theory.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.

REINERTSEN AS performs expansion and buckling analyses of pipelines using ANSYS, afinite element modelling and analysis tool. In an expansion analysis the pipeline is modelledwith thin?walled pipe elements called PIPE20 which allows plastic deformation. However, ina recent analysis the results retrieved from the PIPE20 element were incorrect for strainsabout 1 percent. One main issue was that the PIPE20 element overestimated the strains.The purpose with this Master Thesis was to become familiar with the theories and analysismethods used in pipeline design.

Summary Title: How to make decisions on software based servicedevelopment in the mobile handset industry.?The Rapid Model for Holistic Application Evaluation Authors: Per-Inge AnderssonPatrik Dreveborn Tutors: Björn Regnell, Department of Computer Science,Lund UniversityRobert Wenglén, School of Economics and Management,Lund University Problem formulation: Academically the questions of finding out what constitutes a sound decision base and finding out how to handle the issue of a holistic approach must be addressed in order to make a well balanced and relevant decision model. The core question is which decision criteria to include and which drivers are important in estimating the status of the criteria? Practically to provide Sony Ericsson with a formalized evaluation process for decisions on software development that is transparent, objective and challengeable. Purpose: Academically to contribute to the field of decision making research by elaborating on how to make a holistic, rapid and rational decision model.

AimThe purpose of this study has been to help Åtvidabergs FF to find development opportunities by reviewing the internal communication and decision making process within the organization. In this study we have used two models, Johari window and Administrative man.Our study has two main questions. The questions at issues are:? Can Åtvidabergs FF with help of the communication model Johari window identify how the internal communication can improve?? Can Åtvidabergs FF use the Administrative man as a decision model?o Will the use of the model Administrative man lead to better decisions will be made?MethodWe have made a qualitative case study in a positivistic spirit. Data has been collected through half structured interviews.

This study was the foundation for an evaluation of an employment project in Sweden. The project offers occupations in carpentry as well as kitchen work for people with psychiatric disorders, substance abuse and other social difficulties. This studies purpose was to analyze the projects significance to its participants and also to distinguish weather the project influences the participant?s life in a professional or private way. The methodological tool was five qualitative interviews with the participants and three qualitative interviews with the employees.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a Development Model.

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a Development Model.

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

Problems:How would a decision model that takes into account more aspects and dimensions than just the financial aspect look for smaller service compa-nies? What aspects are important to consider in such a decision model?Purpose:The purpose of this master thesis is to develop a decision model based on previous research, to improve decision making in smaller service com-panies ? by considering perspectives that traditional investment calcula-tions ignore.Method:The study was qualitative and was based on both primary and secondary data. As data collection method for the development of the model we used literature search on previous research. The study?s primary data consisted of responses from five smaller service companies.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

This thesis has been carried out in autumn 2009 at Uppsala University for Boliden Mineral AB. Physical modelling has been used to model a comminution circuit. The model has then been linked to a PLC.When a concentrator is about to become operational Boliden Mineral AB have been looking for a way to test the PLC. The purpose of this report has therefore been to develop models for the subprocess in a concentrator and link these models to the PLC. The subprocess was a comminution circuit in Aitik36.

The thesis deals with three document retrieval models based on logic: the Boolean model,the fuzzy model and the Van Rijsbergen model.In Chapter 1, the author presents the purpose of the thesis. This is to give the logical foundationof the models, to describe them and to examine them critically. In Chapter 2, some importantnotions in document retrieval are presented. Chapter 3 is devoted to the Boolean model, Chapter4 to the fuzzy model and Chapter 5 to the Van Rijsbergen model.These three chapters are organized in the same way. First, the logical foundation of the modelis given.

Due to increasing regulations regarding new diesel vehicles particulate matteremissions the new Scania truck, Scania Euro 6, has been equipped with a particulatefilter. This component effectively stores the particles in the exhaust gas but must becleaned in order to prevent itself from clogging. The filter is cleaned through aprocess named regeneration which is a thermodynamic process in which thetemperature of the filter is raised through fuel supplied to the exhaust gas.The purpose of this thesis is to contribute to the development of improved controlstrategies of the temperature during the regeneration process through thedevelopment of model-based controllers. These controllers are designed in order tohave good performance in stationary as well as automatic regeneration.In order to develop these model-based controllers a model of the system isconstructed. The model is described as a linear thermodynamic grey-box model withflow varying parameters, showing good results in validation.The model provides a simulation environment during the controller design, which isfocused around the development of linear regulators with the exhaust gas mass flowas a scheduling variable whose size determines controllers? mode of operation.